Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDMA1028NZ by Onsemi is a N-CHANNEL Power FET with 2 elements, built-in diode, and 0.068 ohm RDS(on). Ideal for switching applications with 6A IDM and 3.7A ID. Operating in enhancement mode, it has a max temp of 150°C and fast turn-on/off times of 32ns.
Median Price
$0.395
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.268
1k+ parts
$0.200
10k+ parts
-
Adafruit Industries
$0.469
Mouser Electronics
$0.850
$0.364
$0.255
$0.228
Newark
$1.070
$0.526
Rochester
$0.249
$0.207
$0.184
Verical
$0.231
DigiKey
$0.310
Chip1Stop
$0.312
Element14
$0.549
$0.360
$0.353
Digiode
$0.363
Nova Conductors
$0.460
Vyrian
Cyclops Electronics Ltd
NAC Semi
$0.680
DigiKey Marketplace
Prism Electronics
North Shore Components
Flip Electronics
Bristol Electronics
Inventory MP
ABC Electronics Ltd.
Sea View Technologies
Semicontronic
$0.272
$0.265
$0.264
Ampacity Inc.
Corohmni
$0.331
Corphita
$0.344
Argo Parts USA
$0.448
$0.434
Aranea Global
$0.451
$0.433
Component Stockers USA
$0.430
$0.350
$0.340
Advanced Electronics
Aztec Data Supply Inc.
$1.117
Continental Prestige Electronics
$0.530
Perfect Parts
Kepictronics
Lixinc
ChipstoGo Electronic ltd
Supply Digital
Problanco Electronics
Authorized Procurement Solutions
Assy Fe
Kulean Microsystems
TANS Electronics
SupplyDigital Components
UHIMA Technologies
This material provides good insulation and protection for the FET, ensuring reliable operation.
N-channel FETs typically have better performance characteristics compared to P-channel FETs, making them a popular choice for switching applications.
Having 2 separate elements with built-in diode allows for more versatile circuit designs and can improve efficiency.
Designed specifically for switching applications, this FET can efficiently control the flow of current in electronic circuits.
Surface mount FETs are easy to solder onto PCBs, saving space and allowing for automated assembly processes.
With a minimum breakdown voltage of 20V, this FET can handle higher voltages, making it suitable for a variety of applications.
Square packages are easy to handle and integrate into circuit designs, providing a compact form factor.
High pulsed drain current rating allows this FET to handle short spikes in current without damage.
Capable of handling continuous drain currents up to 3.7A, making it suitable for medium-power applications.
With a maximum power dissipation of 1.4W, this FET can handle moderate amounts of power without overheating.
MOSFET technology offers low gate drive power requirements and fast switching speeds, ideal for efficient power management.
Can operate reliably at high temperatures up to 150°C, suitable for industrial and automotive applications.
Fast turn-on time of 32ns allows for quick switching speeds, improving overall efficiency in switching applications.
Symmetrical turn-on and turn-off times of 32ns ensure minimal switching losses and better efficiency in circuit operation.
High-quality terminal finish provides good conductivity and corrosion resistance, ensuring long-term reliability.
Low on-resistance helps reduce power losses and improves efficiency in circuit operation.
Low feedback capacitance of 60pF helps minimize signal distortion and improve high-frequency performance.
Power Field Effect Transistors (FET) FDMA1028NZ attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Maximum Turn Off Time (toff):
Maximum Turn On Time (ton):
FDMA1028NZ Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Changzhou Starsea Electronics
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Microchip Technology
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
ECA2DHG4R7
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NDT3055
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Drain-Source On Resistance: .1 ohm; Package Body Material: PLASTIC/EPOXY;
IRFS3306TRLPBF
Infineon Technologies
IRFS3306TRLPBF by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 620A IDM, 184mJ EAS, and 0.0042 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 230W at 175°C.
IRF540NSTRLPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 130 W; Avalanche Energy Rating (EAS): 185 mJ; JESD-609 Code: e3;
IRFP460LC
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Additional Features: AVALANCHE RATED; Package Style (Meter): FLANGE MOUNT; No. of Elements: 1;
IRLML6401TR
Shenzhen Changyuntong Ic Design
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Position: DUAL; Maximum Turn On Time (ton): 43 ns;
BSC060N10NS3GATMA1/SAMPLE
BSC060N10NS3GATMA1/SAMPLE by Infineon is a N-CHANNEL FET with PLASTIC/EPOXY package, ideal for SWITCHING applications. It features SINGLE configuration with built-in DIODE and METAL-OXIDE SEMICONDUCTOR technology. This 8-terminal transistor has RECTANGULAR shape, DUAL position terminals, and DRAIN case connection for surface mount use.
IRLL024NTRPBF
IRLL024NTRPBF by Infineon Technologies is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 3.1A Max Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 12A Pulsed Drain Current, and 0.065 ohm On Resistance. Suitable for surface mount with GULL WING terminals in a SMALL OUTLINE package style.
JANTX2N6796
Omnirel
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; JESD-30 Code: O-MBCY-W3; Terminal Finish: Tin/Lead (Sn/Pb);
IRFP460
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Minimum DS Breakdown Voltage: 500 V; JEDEC-95 Code: TO-247;
IRFS4410ZTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 230 W; Terminal Form: GULL WING; Transistor Application: SWITCHING;
FQP27P06
FQP27P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 108A IDM, 560mJ EAS, and 0.07 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 120W at 175°C.
BSC011N03LSIATMA1
Infineon's BSC011N03LSIATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0015 ohm RDS(on), and 100mJ EAS rating. Its small outline package and DUAL terminal position make it suitable for various power management systems.
CSD18563Q5A-P
Texas Instruments
CSD18563Q5A-P by Texas Instruments is an N-CHANNEL FET for SWITCHING applications. It features a 60V DS Breakdown Voltage, 251A IDM, and 0.0108 ohm Drain-Source On Resistance. With a max operating temperature of 150°C, this MOSFET is suitable for high-power switching tasks in various electronic devices.
IRFZ44NPBF
IRFZ44NPBF by Infineon is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 160A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 94W and operates in ENHANCEMENT MODE at up to 175°C.
IRLML9301TRPBF
Infineon's IRLML9301TRPBF is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 15A IDM, and 0.064 ohm RDS(ON). With a small outline package style, it operates b/w -55 to 150 °C and has a max power dissipation of 1.3W.
IRF7341TRPBF
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (Abs) (ID): 4.7 A;
IRLML6401PBF
IRLML6401PBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 33mJ EAS. With ENHANCEMENT MODE operation, it has a -55 to 150 °C temperature range and 0.05 ohm RDS(on). Ideal for compact designs with its SMALL OUTLINE package style.
STS4DNF60L
STMicroelectronics
STS4DNF60L by STMicroelectronics is a N-CHANNEL FET with 60V DS Breakdown Voltage, 16A IDM, and 0.065 ohm RDS(on). Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation in a SMALL OUTLINE package. Operating at up to 150°C, it offers high power dissipation and avalanche energy rating.
CSD16301Q2
CSD16301Q2 by Texas Instruments is a N-CHANNEL Power FET with 25V DS Breakdown Voltage and 20A IDM. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 2.3W. This SMALL OUTLINE transistor has a -55 to 150 °C operating temperature range and 0.034 ohm Drain-Source On Resistance.
IRF3205ZLPBF
IRF3205ZLPBF by Infineon is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 440A IDM. Ideal for SWITCHING applications, it features a 0.0065 ohm Drain-Source On Resistance and operates in ENHANCEMENT MODE. With a max power dissipation of 170W, this transistor is designed for high-performance electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDMA8051L
FDMA8051L by Onsemi is a N-CHANNEL FET with 40V DS breakdown voltage, ideal for switching applications. It features 80A IDM pulsed drain current, 0.014 ohm max RDS(on), and 25pF Crss feedback capacitance. This MOSFET operates in enhancement mode with -55 to 150°C temp range, suitable for high-power applications.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain-Source On Resistance: .014 ohm;
FDMA530PZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; JESD-30 Code: S-PDSO-N6; Package Shape: SQUARE;
FDMA908PZ
FDMA908PZ by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage and 40A IDM. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 2.4W Power Dissipation and -55 to 150 °C temperature range.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Maximum Drain-Source On Resistance: .0125 ohm; Maximum Feedback Capacitance (Crss): 903 pF;
FDMA510PZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; JESD-609 Code: e4; Peak Reflow Temperature (C): NOT SPECIFIED;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; No. of Elements: 1; JESD-30 Code: R-PDSO-N6;
FDMA1025P
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.4 W; No. of Elements: 2; Maximum Drain Current (Abs) (ID): 3.1 A;
FDMA1028NZTR
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.4 W; Maximum Drain-Source On Resistance: .068 ohm; Transistor Element Material: SILICON;
FDMA420NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Qualification: Not Qualified; Package Body Material: PLASTIC/EPOXY;
FDMA430NZ
FDMA430NZ by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 5A Drain Current. Ideal for applications requiring high power dissipation up to 2.4W in small outline packages, operating at temperatures up to 150°C. Suitable for enhancement mode operations in various electronic devices.
FDMA507PZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Peak Reflow Temperature (C): NOT SPECIFIED; Qualification: Not Qualified;
FDMA520PZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; JESD-30 Code: S-PDSO-N6; No. of Terminals: 6;
FDMA86151L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Operating Mode: ENHANCEMENT MODE; Terminal Form: NO LEAD;
FDMA8878
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Minimum Operating Temperature: -55 Cel; Peak Reflow Temperature (C): 260;
FDMA8878-F130
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1;
FDMA910PZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Terminal Finish: NICKEL PALLADIUM GOLD; Moisture Sensitivity Level (MSL): 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved