Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UJA1167ATK/X/0Z by NXP Semiconductors is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 13V nominal voltage. It operates b/w -40 to 150°C, has a small outline package style, and is suitable for automotive network interfaces.
Median Price
$2.388
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$2.586
Rochester
$2.190
$1.960
$1.850
Nova Conductors
$2.431
NAC Semi
$3.100
IBS Electronics
$2.945
Vyrian
Digiode
Chip Stock
Anansix
Flip Electronics
Ampacity Inc.
$1.390
Argo Parts USA
Netroflash
Continental Prestige Electronics
$2.382
Microchip USA
$12.658
AZTECH Wire
$16.360
iodParts Technologies Inc.
QUARKTWIN TECHNOLOGY LTD
Lixinc
Authorized Procurement Solutions
UNI Independent Distributors
Corphita
The use of plastic/epoxy material makes the product lightweight and durable, ideal for long-term use in various environments.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and space in the design.
AEC-Q100 screening ensures the product meets automotive industry standards for quality and reliability, making it suitable for use in automotive applications.
The high maximum operating temperature of 150°C ensures the product can withstand harsh operating conditions without overheating or malfunctioning.
The low minimum operating temperature of -40°C allows the product to function effectively in cold environments without performance issues.
The high data rate of 5 Mbps allows for fast and efficient data transmission, making the product suitable for demanding network applications.
Network Interfaces UJA1167ATK/X/0Z attributes and parameters. Explore more Network Interfaces devices from NXP Semiconductors
Data Rate:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
UJA1167ATK/X/0Z Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Bkc Semiconductors
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
EU2B-YS3203C
TJA1051T/3/CM,118
NXP Semiconductors
NXP Semiconductors' TJA1051T/3/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features 8 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures high reliability in harsh environments.
KSZ9897STXC-TR
Microchip Technology
Microchip Technology's KSZ9897STXC-TR is an Ethernet transceiver with 128 terminals in a square package. Operating temperature ranges from 0 to 70°C, suitable for commercial telecom applications. Terminal finish is matte tin with gull wing form, ideal for surface mount assembly.
DP83848CVV/NOPB
Texas Instruments
DP83848CVV/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It features a quad terminal position, matte tin finish, and operates b/w 0-70°C. Ideal for network interfaces in commercial applications due to its compact flatpack design and fine pitch terminals.
RTL8211FSI-CG
Realtek Semiconductor
Realtek's RTL8211FSI-CG is a 48-terminal Ethernet transceiver with 1000 Mbps data rate. It operates b/w -40°C to 85°C, making it suitable for telecom applications. This square-shaped chip carrier has a very thin profile and is surface-mountable, with terminals in quad position.
TJA1051T/3
NXP Semiconductors' TJA1051T/3 is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at 5V nominal voltage, drawing a max of 110mA current. The small outline package measures 4.9mm x 3.9mm x 1.75mm and features gull wing terminals for surface mounting.
TJA1042TK/3/1J
NXP Semiconductors' TJA1042TK/3/1J is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, has a supply voltage of 5V, and consumes only 0.07 mA. Ideal for automotive applications due to its small outline package style and dual terminal position.
LAN8742A-CZ
LAN8742A-CZ by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 0-70°C. Features 24 terminals in a square chip carrier package for surface mount applications. Suitable for telecom and networking devices requiring TS 16949 screening level.
AT86RF212B-ZUR
Atmel
SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
DP83865DVH
DP83865DVH by Texas Instruments is an Ethernet transceiver IC with a data rate of 1000 Mbps. It operates at a supply voltage of 1.8V and has a terminal pitch of 0.5mm. This network interface chip is designed for commercial temperature grade applications.
MAX3051ESA-T
Maxim Integrated
MAX3051ESA-T by Maxim Integrated is a Network Interface with 8 terminals, operating at 3.3V. It has a data rate of 1 Mbps and is ideal for industrial applications requiring an interface circuit with a small outline package style. The IC operates in temperatures ranging from -40°C to 85°C, making it suitable for various telecom applications.
88E1111-B2-BAB1C000
Marvell Technology
Marvell's 88E1111-B2-BAB1C000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at a nominal voltage of 1V and has a terminal pitch of 1mm. Ideal for network interfaces, this component is designed for surface mount applications with dimensions of 10mm x 14mm.
TJA1040T/N1,118
NXP Semiconductors' TJA1040T/N1,118 is a CMOS interface circuit with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for network interfaces in various applications. The small outline package measures 3.9mm x 4.9mm with a terminal pitch of 1.27mm, making it ideal for compact designs requiring low power consumption.
TJA1051T/3/2Z
NXP Semiconductors' TJA1051T/3/2Z is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 110 mA max supply current. It comes in a small outline package for automotive network interfaces applications.
SN65HVD232DR
SN65HVD232DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, ideal for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C. Perfect for network interfaces requiring low supply current and high reliability.
TJA1042T/3,118
NXP Semiconductors' TJA1042T/3,118 is a network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature grade. The IC features a small outline package style, Gull Wing terminal form, and nickel palladium gold silver finish.
TJA1051T,112
NXP Semiconductors' TJA1051T,112 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. With a small outline package style, it's ideal for network interfaces in automotive applications.
MCP2542FDT-H/MF
MCP2542FDT-H/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, with a supply voltage of 5V and max current of 140mA. The package is small outline, heat sink, very thin profile square shape with matte tin finish and dual terminals.
KSZ8081RNACA-TR
Microchip's KSZ8081RNACA-TR is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 0-70°C. It features a square chip carrier package style, matte tin finish, and 3.3V supply voltage. Ideal for network interfaces in commercial applications requiring a compact design and high-speed connectivity.
TJA1021TK/10/C,118
NXP Semiconductors' TJA1021TK/10/C,118 is a LIN transceiver with 12V supply voltage. It operates b/w -40 to 150°C, suitable for automotive applications. The small outline package has 8 terminals and is AEC-Q100 qualified for robust performance in harsh environments.
TCAN1051HGVDRBRQ1
TCAN1051HGVDRBRQ1 by Texas Instruments is a Network Interface IC with AEC-Q100 screening, operating from -55 to 125°C. It features 5 Mbps data rate, 180 mA supply current at 5V, and small outline package style. Ideal for automotive applications due to its military temperature grade and interface circuit type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UJA1169ATK/F/3Z
UJA1169ATK/F/3Z by NXP Semiconductors is a CAN FD transceiver with 20 terminals, 15 Mbps data rate, and 67 mA supply current. It is ideal for automotive applications requiring AEC-Q100 screening and operates at a nominal voltage of 13V.
UJA1169ATK/X/FZ
UJA1169ATK/X/FZ by NXP Semiconductors is a CAN FD transceiver with 20 terminals, suitable for automotive applications. It operates at a nominal voltage of 13V and supports data rates up to 15 Mbps. This small outline package has a terminal pitch of 0.5mm and can handle a max supply current of 67mA.
UJA1169ATK/XZ
UJA1169ATK/XZ by NXP Semiconductors is a CAN FD transceiver with 15 Mbps data rate, suitable for automotive applications. It operates at a nominal voltage of 13V and has a max supply current of 67mA. This network interface IC comes in a small outline package with dual terminals and nickel palladium gold silver finish.
UJA1169ATK/3Z
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;
UJA1169ATKZ
UJA1169ATKZ by NXP Semiconductors is a CAN FD transceiver with 1 function and a data rate of 15 Mbps. It has a small outline package style, measures 5.5mm in length and 3.5mm in width, and operates at a nominal voltage of 13V. This network interface component is suitable for automotive applications requiring high-speed communication.
UJA1169ATK/FZ
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-N20;
UJA1167ATK/0Z
CAN TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;
UJA1169ATK/F/3
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
UJA1169ATK
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Data Rate: 15 Mbps;
UJA1169ATK/3
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Terminal Pitch: .5 mm;
UJA1167TK,118
CAN TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: SON; Package Shape: RECTANGULAR; Screening Level: AEC-Q100;
UJA1169ATK/F
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; No. of Transceivers: 1;
UJA1162ATK/0Z
UJA1162ATK/0Z by NXP Semiconductors is a CAN FD transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 13 V nominal voltage. It is ideal for automotive network interfaces, featuring a small outline package style and operating temperature range from -40 to 150°C. This surface-mount component has 14 terminals in a rectangular shape for compact designs.
UJA1167ATK
CAN TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE;
UJA1169TKZ
UJA1167TK/VX,118
CAN TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: SON; Package Shape: RECTANGULAR; Qualification: Not Qualified;
UJA1018TK
LIN TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVSON; Package Shape: RECTANGULAR; No. of Transceivers: 1;
UJA1061TW/5V0
ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HTSSOP; Package Shape: RECTANGULAR;
UJA1061TW/3V0,518
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved