Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' TJA1145TK/FDJ is a CAN transceiver with 1 Mbps data rate, AEC-Q100 screening level, and 14 terminals. Ideal for automotive applications, it operates on power supplies of 4.5-28V and has a max supply current of 1.5mA. The small outline package with surface mount capability makes it suitable for compact designs in automotive networks.
Median Price
$1.845
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.740
1k+ parts
$1.560
10k+ parts
$1.460
Verical
$1.950
$1.825
EBV Elektronik
Digiode
$1.596
Nova Conductors
$2.585
TME
$2.020
Flip Electronics
Vyrian
ComSIT Distribution GmbH
Anansix
Semicontronic
$1.430
$1.394
$1.387
Ampacity Inc.
Corphita
$1.512
Corohmni
$2.362
Advanced Electronics
$2.433
$2.311
Continental Prestige Electronics
$2.533
Argo Parts USA
Microchip USA
$7.440
Aztec Data Supply Inc.
$10.880
AZTECH Wire
$15.410
Perfect Parts
Lixinc
Authorized Procurement Solutions
UNI Independent Distributors
The use of plastic/epoxy material in the package body provides durability and enhances the product's resistance to physical damage, making it a reliable choice for long-term use.
The surface mount feature allows for easy installation on PCBs, saving space and making the product suitable for compact electronic devices.
AEC-Q100 screening level ensures high quality and reliability, making the product suitable for automotive applications where robust performance is essential.
The wide range of power supplies supported (4.5V to 28V) allows for versatile usage scenarios, making the product compatible with a variety of systems and applications.
With 14 terminals available, the product offers flexibility in connectivity options, enabling the user to interface with multiple devices or components efficiently.
The small outline package style saves valuable space on the PCB, making the product ideal for designs with limited real estate or where compactness is crucial.
The high-quality terminal finish with nickel, palladium, gold, and silver ensures excellent conductivity and resistance to corrosion, contributing to long-term reliability of the product.
With a low maximum supply current requirement of 1.5 mA, the product is energy-efficient and suitable for applications where power consumption is a concern.
The telecom IC type of CAN transceiver indicates compatibility with Controller Area Network (CAN) communication protocol, making the product ideal for use in automotive and industrial networks.
Supporting a data rate of 1 Mbps, the product offers high-speed communication capabilities, making it a suitable choice for applications requiring fast and reliable data transmission.
Network Interfaces TJA1145TK/FDJ attributes and parameters. Explore more Network Interfaces devices from NXP Semiconductors
Data Rate:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
No. of Transceivers:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Sub-Category:
Maximum Supply Current:
Surface Mount:
Telecom IC Type:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
TJA1145TK/FDJ Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 13/Feb/2020 Mult Dev EOL 28/Feb/2022
PCN Design/Specification - TJA1145 Product Update 2/Jun/2018 TJA1145TK 06/Nov/2020
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
E8WSDC12-32.768KTR
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
SPC TECHNOLOGY/ MULTICOMP
Microsemi
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STMicroelectronics
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
UJA1169ATK/X/FZ
NXP Semiconductors
UJA1169ATK/X/FZ by NXP Semiconductors is a CAN FD transceiver with 20 terminals, suitable for automotive applications. It operates at a nominal voltage of 13V and supports data rates up to 15 Mbps. This small outline package has a terminal pitch of 0.5mm and can handle a max supply current of 67mA.
ADIN1300CCPZ
Analog Devices
ADIN1300CCPZ by Analog Devices is an Ethernet transceiver with 40 terminals in a square chip carrier package. Operating temperature ranges from -40 to 105°C, suitable for industrial use. It has a nominal voltage of 1.8V and terminal pitch of 0.5mm, making it ideal for network interfaces.
KSZ8001LI
Microchip Technology
Microchip Technology's KSZ8001LI is an Ethernet transceiver with 100 Mbps data rate. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 1.8V. The package style is flatpack, low profile, fine pitch making it suitable for network interfaces in various applications.
KSZ9897RTXC
Microchip Technology's KSZ9897RTXC is an Ethernet transceiver IC with 128 terminals in a square package. Operating temperature range of 0-70°C, suitable for commercial telecom applications. Features matte tin terminal finish, quad terminal position, and thin profile flatpack style.
AR8031-AL1A-R
Qualcomm Atheros
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1052IT/5
NXP Semiconductors' TJA1052IT/5 is a 16-terminal interface circuit with 1 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C and has a supply voltage of 5V. The package style is small outline, making it ideal for surface mount designs in automotive networks.
RN131G-I/RM
Microchip Technology's RN131G-I/RM is a surface mount network interface with 44 terminals. It operates b/w -30°C to 85°C, with a seated height of 3.5mm and nominal voltage of 3.3V. Ideal for LAN switching circuits, it has a compact rectangular package style measuring 20mm in width and 37mm in length.
SN65HVD231QDG4
Texas Instruments
SN65HVD231QDG4 by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 125°C. Ideal for network interfaces requiring low supply current and high reliability.
TLE9255WLCXUMA1
Infineon Technologies
TLE9255WLCXUMA1 by Infineon Technologies is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It is designed for automotive applications requiring a small outline package with surface mount capability and dual terminal position.
SN65HVD232QDR
SN65HVD232QDR by Texas Instruments is a BICMOS technology interface circuit with 1 Mbps data rate. It operates at a nominal voltage of 3.3V and has a small outline package style. This network interface is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
TJA1041AT/CM,118
NXP Semiconductors' TJA1041AT/CM,118 is a 14-terminal network interface with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. The IC is designed in CMOS technology, suitable for telecom interface circuits in compact designs.
KSZ8041FTL
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
TJA1021T/20/CM,118
NXP Semiconductors' TJA1021T/20/CM,118 is a LIN transceiver with 8 terminals, AEC-Q100 screening, and 12V supply voltage. It operates b/w -40°C to 150°C, suitable for automotive network interfaces. The small outline package measures 4.9mm x 3.9mm x 1.75mm and supports surface mount assembly.
MCP2551-I/SNG
MCP2551-I/SNG by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for industrial applications. Small outline package with dual terminals and matte tin finish.
KSZ8081MNXCA
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SN65HVD233MDREP
SN65HVD233MDREP by Texas Instruments is a network interface IC with 3.3V supply, 1Mbps data rate, and 8 terminals in a small outline package. Ideal for military-grade applications requiring reliable communication over long distances at temperatures ranging from -55 to 125°C.
DP83848IVV
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
LTC2875MPS8#PBF
Linear Technology
INTERFACE CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TJA1057T/1Z
INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
KSZ8081MNXCA by Microchip: Ethernet transceiver IC with 100 Mbps data rate, operates at 3.3V supply voltage. Ideal for network interfaces, features TS 16949 screening level and operates b/w 0-70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TJA1145ATK/FD
NXP
NXP Semiconductors' TJA1145ATK/FD is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 65 mA max supply current. Ideal for automotive applications due to its small outline package and low seated height of 1 mm.
TJA1051TK/3,118
NXP Semiconductors' TJA1051TK/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. This small outline package has 8 terminals, 0.65mm pitch, and operates at peak reflow temperature of 260°C.
TJA1042T/3,118
NXP Semiconductors' TJA1042T/3,118 is a network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature grade. The IC features a small outline package style, Gull Wing terminal form, and nickel palladium gold silver finish.
TJA1042TK/3/1J
NXP Semiconductors' TJA1042TK/3/1J is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, has a supply voltage of 5V, and consumes only 0.07 mA. Ideal for automotive applications due to its small outline package style and dual terminal position.
TJA1051T/3/1J
NXP Semiconductors' TJA1051T/3/1J is a CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm and supports surface mount assembly.
TJA1051T/3,118
NXP Semiconductors' TJA1051T/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It operates in automotive grade temperatures (-40 to 125°C) and has AEC-Q100 screening level for reliability. With a small outline package style, it's ideal for automotive network interfaces.
TJA1051TK/3/1J
NXP's TJA1051TK/3/1J is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, operating at 5V. It features a small outline package with 8 terminals and peak reflow temp of 260°C. Ideal for automotive applications requiring high-speed network interfaces in compact spaces.
TJA1050T/CM,118
TJA1050T/CM,118 by NXP Semiconductors is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This small outline package is commonly used in automotive applications.
TJA1042TK/3,118
NXP Semiconductors' TJA1042TK/3,118 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. Operating b/w -40 to 125 °C, it supports data rates up to 1 Mbps. Ideal for automotive applications requiring a compact, low-power interface circuit.
TJA1043T,118
NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.
TJA1042T/3/1J
NXP Semiconductors' TJA1042T/3/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and supports a 5V supply voltage. Ideal for interface circuits in automotive applications due to its robust design and high-temperature tolerance.
TJA1051T/3/CM,118
NXP Semiconductors' TJA1051T/3/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features 8 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures high reliability in harsh environments.
TJA1042T/3/CM,118
NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.
TJA1043T/1J
NXP Semiconductors' TJA1043T/1J is a 14-terminal interface circuit with AEC-Q100 screening. It operates at 5V nominal voltage, suitable for automotive applications. With small outline package style and gull wing terminal form, it measures 8.65mm x 3.9mm x 1.75mm for compact designs.
TJA1042T/1J
NXP Semiconductors' TJA1042T/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and supports a nominal voltage of 5V. Ideal for interface circuits in automotive applications requiring robust communication solutions.
TJA1040T/CM,118
NXP Semiconductors' TJA1040T/CM,118 is a CMOS interface circuit with 8 terminals and 1 Mbps data rate. It operates at 5V supply voltage, consuming 0.07 mA current. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
TJA1021TK/20/C,118
NXP Semiconductors' TJA1021TK/20/C,118 is a LIN transceiver with 8 terminals. It operates b/w -40 to 150°C, suitable for automotive applications. The package style is small outline with a max seated height of 0.8mm, making it ideal for space-constrained designs.
TJA1051T/E/1J
NXP Semiconductors' TJA1051T/E/1J is an AEC-Q100 compliant CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm, making it ideal for space-constrained designs.
TJA1051T/E,118
NXP Semiconductors' TJA1051T/E,118 is a CAN transceiver with 1 Mbps data rate and 5V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. This small outline package with gull wing terminals is ideal for automotive network interfaces.
TJA1051T/1J
TJA1051T/1J by NXP Semiconductors is a CAN transceiver with 8 terminals, operating at 5V and supporting data rates up to 1 Mbps. It has a temperature range of -40 to 125°C, making it suitable for automotive applications. The package style is small outline with gull wing terminals, ideal for surface mount designs.
TJA1042T/3,112
NXP Semiconductors' TJA1042T/3,112 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved