Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TCAN1042HDRBTQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C, suitable for military applications. This small outline package has 8 terminals and is AEC-Q100 compliant, making it ideal for automotive network interfaces.
Median Price
$2.500
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.620
100+ parts
$1.338
1k+ parts
$0.723
10k+ parts
-
Mouser Electronics
$1.520
$1.310
$1.270
DigiKey
Nova Conductors
$1.340
Digiode
$1.539
Vyrian
Cyclops Electronics Ltd
Corohmni
Argo Parts USA
Continental Prestige Electronics
$1.313
Semicontronic
$1.380
$1.346
$1.339
Ampacity Inc.
Advanced Electronics
$1.311
Corphita
$1.458
Parana Technologies
$8.268
$8.885
DigiPath Technology Company
$9.104
ChromeModa Solutions
$9.290
$7.618
IDEA Electronic Components Group
$8.826
$8.361
Netroflash
$1.273
$1.246
Plastic and epoxy materials make the package lightweight and durable, ensuring the product is long-lasting and easy to handle.
Being surface mountable means easy installation on circuit boards, saving space and making assembly more efficient.
AEC-Q100 screening ensures high quality and reliability suitable for automotive applications, making this product a dependable choice.
The high maximum operating temperature allows for reliable performance in various environments, making it suitable for demanding conditions.
Operating at a standard 5V supply voltage makes it compatible with a wide range of systems, providing flexibility in integration.
Network Interfaces TCAN1042HDRBTQ1 attributes and parameters. Explore more Network Interfaces devices from Texas Instruments
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
TCAN1042HDRBTQ1 Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - TCAN1042 01/Dec/2021 TCAN1042 22/Aug/2019
PCN Assembly/Origin - Assembly/Test Site 27/Jul/2023
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Silicon Standard
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Zetex Plc
Siemens
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Transys Electronics
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
TJA1027TK/20,118
LIN TRANSCEIVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
TJA1043TKY
NXP Semiconductors' TJA1043TKY is a 14-terminal interface circuit with 5V supply voltage, supporting data rates up to 1 Mbps. AEC-Q100 screened for automotive applications, it features a small outline package with gull wing terminals and nickel palladium gold silver finish.
TJA1050T/VM,518
NXP Semiconductors' TJA1050T/VM,518 is a Network Interface IC with 1Mbps data rate and 5V supply voltage. It features CMOS technology, operates in automotive temperature grade (-40 to 125°C), and has a small outline package style. Ideal for interface circuits in automotive applications due to its low power consumption of 0.075mA.
ATA6561-GAQW
Microchip Technology
ATA6561-GAQW by Microchip is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates at -40 to 150°C, draws 70 mA max supply current, and has a compact rectangular package suitable for automotive applications.
MCP2562-E/P
MCP2562-E/P by Microchip: CAN transceiver for automotive applications. Operates at 1 Mbps data rate with 5V supply voltage. Withstands -40 to 125 °C temperature range, ideal for TS 16949 screening level in automotive networks.
TJA1044GT/3
INTERFACE CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
TJA1052IT/2Y
INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): 260;
PM8800A
STMicroelectronics
PM8800A by STMicroelectronics is a network interface IC with 16 terminals, operating b/w -40 to 85°C. It features a small outline package style and supports circuits in telecom applications. With a supply voltage of 1.8V, it has a terminal pitch of 0.65mm and peak reflow temperature of 260°C.
LAN8740A-EN-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8710AI-EZK-TR-ABC
LAN8710AI-EZK-TR-ABC by Microchip is a Network Interface with 32 terminals, operating at -40 to 85°C. It features Ethernet transceiver type, 100 Mbps data rate, and 1.2V supply voltage. Ideal for industrial applications requiring reliable network connectivity in compact spaces.
PCA82C250T/N4
PCA82C250T/N4 by NXP Semiconductors is an automotive-grade BICMOS technology interface circuit with 8 terminals, operating at 5V. It has a temperature range of -40 to 125°C and peak reflow temp of 260°C. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
TCAN1051HVDRQ1
TCAN1051HVDRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals. It operates b/w -55°C to 125°C, supporting a data rate of 2 Mbps at a supply voltage of 5V. Ideal for automotive applications due to its MILITARY temperature grade and small outline package design.
KSZ8794CNXCC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HQCCN; Package Shape: SQUARE;
KSZ8999I
Microchip Technology's KSZ8999I is an Ethernet transceiver with 8 ports, operating at -40 to 85°C. It features a flatpack, fine pitch style with 208 terminals in a square shape. Suitable for network interfaces, it has a low supply voltage of 2.1V and Gull Wing terminal form.
MAX13054AEASA+
Maxim Integrated
CAN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
KSZ9031RNXIC
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
DP83848YB/NOPB
DP83848YB/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate, operating at 3.3V. It features a flatpack package style, quad terminal position, and -40 to 125 °C temperature range. Ideal for automotive applications due to its CMOS technology and compact design.
ISO1042BQDWRQ1
ISO1042BQDWRQ1 by Texas Instruments is a network interface IC with 16 terminals and a small outline package style. It operates in automotive temperature grades (-40 to 125°C) and has a nominal voltage of 1.8V. This IC is suitable for use in interface circuits for telecom applications.
KSZ8091RNBCA-TR
Microchip Technology's KSZ8091RNBCA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate. Operating at 0-70°C, it has a 3.3V supply voltage and matte tin finish. Ideal for network interfaces, this chip carrier package suits telecom applications with its compact square shape and low profile design.
CC3100MODR11MAMOBR
CC3100MODR11MAMOBR by Texas Instruments is a wireless LAN circuit with 63 terminals, operating at 3.3V. It has a temperature range of -20 to 70°C and features nickel gold terminal finish. This network interface module is ideal for IoT applications requiring reliable connectivity in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TCAN330GDCNR
TCAN330GDCNR by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -40 to 125°C, and data rate of 5 Mbps. It is designed for automotive applications requiring a small outline package with low profile and shrink pitch.
TCAN1042HVDRBTQ1
TCAN1042HVDRBTQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C, suitable for military applications. With a supply voltage of 5 V and max current of 110 mA, it's ideal for automotive network interfaces.
TCAN1042HVDRQ1
TCAN1042HVDRQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates at temperatures ranging from -55 to 125°C and has a max supply current of 110 mA. This AEC-Q100 compliant device is ideal for automotive applications due to its small outline package and military-grade temperature rating.
TCAN4550RGYRQ1
TCAN4550RGYRQ1 by Texas Instruments is an automotive-grade interface circuit with 8 Mbps data rate. It operates b/w -40 to 125 °C and has a supply voltage of 12 V. This chip carrier package with matte tin terminals is ideal for network interfaces in automotive applications.
TCAN1042HGVDRQ1
TCAN1042HGVDRQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 5 Mbps. It operates at temperatures ranging from -55 to 125°C and has a supply voltage of 5V. This network interface IC comes in a small outline package with dual terminals, suitable for military-grade applications.
TCAN332DCNR
TCAN332DCNR by Texas Instruments is an automotive-grade network interface IC with a supply voltage of 3.3V and data rate of 1Mbps. It features a small outline package style, dual terminal position, and nickel palladium gold finish. Ideal for use in telecom applications requiring high-speed interface circuits in harsh environments.
TCAN332DR
TCAN332DR by Texas Instruments is a network interface IC with 1 channel and a data rate of 1 Mbps. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is commonly used in automotive applications.
TCAN332DCNT
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR;
TCAN4550RGYTQ1
TCAN4550RGYTQ1 by Texas Instruments is an automotive-grade interface circuit with a 12V supply voltage. It operates at temperatures ranging from -40 to 125°C and supports data rates up to 8 Mbps. This chip carrier package with 20 terminals is designed for network interfaces in automotive applications.
TCAN1051HVDRBTQ1
INTERFACE CIRCUIT; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
TCAN1042HVDR
TCAN1042HVDR by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates in a temperature range from -55 to 125°C, making it suitable for military applications. With a nominal voltage of 5V and max supply current of 180mA, this network interface IC is designed for high-reliability communication systems.
TCAN1042HVDRBRQ1
TCAN1042HVDRBRQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C, suitable for military applications. With a supply voltage of 5 V and max current of 110 mA, it's ideal for automotive network interfaces.
TCAN1042HDR
ETHERNET TRANSCEIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TCAN4550RGYR
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: VQCCN; Package Shape: RECTANGULAR;
TCAN330DCNR
TCAN1042HGVDR
TCAN1042HGVDR by Texas Instruments is an Ethernet transceiver with 5 Mbps data rate, operating at -55 to 125 °C. It has a small outline package style, 8 terminals, and requires 180 mA supply current. Ideal for military-grade telecom applications due to its nickel palladium gold finish and gull wing terminal form.
TCAN330DCNT
TCAN1042HGDR
TCAN1042HGDR by Texas Instruments is an Ethernet transceiver with a data rate of 5 Mbps. It operates b/w -55 to 125°C, suitable for military-grade applications. With a supply voltage of 5V and max supply current of 180mA, it's ideal for network interfaces in harsh environments.
TCAN4550RGYT
TCAN4550RGYT by Texas Instruments is a network interface chip carrier with 20 terminals and a very thin profile. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 5 Mbps. This automotive-grade IC is commonly used in interface circuits for telecom applications.
TCAN332GDCNT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved