Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Microchip USA
$1.000
AZTECH Wire
$18.760
One Stop Electronics
$969.000
UNI Independent Distributors
Corphita
Vigor
Network Interfaces TJA1051T/3/1U attributes and parameters. Explore more Network Interfaces devices from NXP Semiconductors
Data Rate:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TJA1051T/3/1U Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev 02/Jul/2020
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LL4148
Sangdest Microelectronics (Nanjing)
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Baneasa S A
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
RN2483A-I/RM105
Microchip Technology
RN2483A-I/RM105 by Microchip is a surface mount Ethernet transceiver with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and requires 3.3V supply voltage. This compact module (17.78mm x 26.67mm) is ideal for network interfaces in various applications.
AR8033-AL1A-R
Qualcomm Atheros
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1044GT/1Z
NXP Semiconductors
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
88E1512PB2-NNP2C000
Marvell Technology
Marvell's 88E1512PB2-NNP2C000 is a CMOS Ethernet transceiver with 56 terminals in a square chip carrier package. Operating b/w 0-70°C, it has a low profile of 1mm and requires 1.8V supply voltage. Ideal for network interfaces, this component suits telecom applications due to its compact size and surface-mount capability.
KSZ8851SNLI-TR
Microchip Technology's KSZ8851SNLI-TR is a Network Interface with 32 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features Ethernet transceiver technology, operates at 1.8V supply voltage, and has a terminal pitch of 0.5mm for compact applications.
CR95HF-VMD5T
CR95HF-VMD5T by STMicroelectronics is a network interface chip carrier with 32 terminals, operating at -25 to 85°C. It has a low supply current of 0.0006 mA at 3.3V, suitable for Ethernet transceiver applications due to its small size and surface-mount capability.
DP83849IFVS/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: QFP; Package Shape: SQUARE;
KSZ8081RNAIA-G3XX-TR
KSZ8081RNAIA-G3XX-TR by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a square chip carrier package style suitable for industrial applications requiring reliable network interfaces. The IC has a terminal pitch of 0.5 mm and operates at a nominal voltage of 3.3 V.
LAN8710AI-EZK-TR-ABC
LAN8710AI-EZK-TR-ABC by Microchip is a Network Interface with 32 terminals, operating at -40 to 85°C. It features Ethernet transceiver type, 100 Mbps data rate, and 1.2V supply voltage. Ideal for industrial applications requiring reliable network connectivity in compact spaces.
KSZ9031RNXIA-TR
Microchip Technology's KSZ9031RNXIA-TR is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a low profile chip carrier package style. Ideal for networking applications requiring high-speed data transmission.
TLE72593GEXUMA3
Infineon Technologies
TLE72593GEXUMA3 by Infineon is an 8-terminal interface circuit with a nominal voltage of 8V. It features a small outline package style, gull wing terminal form, and AEC-Q100 screening level. Ideal for network interfaces in automotive applications due to its compact size and surface-mount capability.
TLE8250GVIOXUMA5
TLE8250GVIOXUMA5 by Infineon Technologies is a BICMOS technology interface circuit with 8 terminals in a small outline package. It operates at a nominal voltage of 5V and has nickel gold palladium terminal finish. Ideal for network interfaces, this device is surface mountable and features gull wing terminal form.
DP83848MPTBEP
DP83848MPTBEP by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -55 to 125 °C, suitable for military-grade applications. The package is a square flatpack with 48 terminals, featuring GULL WING terminal form and 0.5 mm pitch.
DP83848CVV
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
RTL8211FD-CG
Realtek Semiconductor
RTL8211FD-CG by Realtek Semiconductor is a network interface chip with 40 terminals and a square package shape. It operates at temperatures ranging from 0 to 70 °C and has a seated height of 0.9 mm. This Ethernet transceiver is commonly used in telecom applications.
LAN8741A-EN
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
VSC8514XMK-03
Microsemi
ETHERNET TRANSCEIVER; Terminal Form: BUTT; No. of Terminals: 138; Package Code: HVBCC; Package Shape: SQUARE; JESD-30 Code: S-PBCC-B138;
TCAN1044VDRBRQ1
TCAN1044VDRBRQ1 by Texas Instruments is an automotive-grade network interface IC with 8 Mbps data rate, AEC-Q100 screening, and 5 V supply voltage. It comes in a small outline package suitable for surface mount applications in automotive electronics. Operating temperature ranges from -40 to 125°C making it ideal for harsh environments.
88E1116R-A0-NNC1C000
Marvell Technology's 88E1116R-A0-NNC1C000 is a CMOS Ethernet transceiver with a data rate of 1000 Mbps. It features a square chip carrier package style, matte tin terminal finish, and quad terminal position. Ideal for network interfaces in telecommunications applications.
DP83826IRHBR
DP83826IRHBR by Texas Instruments is an Ethernet transceiver with a data rate of 100000 Mbps. It operates at a nominal voltage of 3.3V and has a max supply current of 53 mA. This network interface IC is suitable for industrial applications requiring high-speed data transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TJA1051TK/3,118
NXP Semiconductors' TJA1051TK/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. This small outline package has 8 terminals, 0.65mm pitch, and operates at peak reflow temperature of 260°C.
TJA1042T/3,118
NXP Semiconductors' TJA1042T/3,118 is a network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature grade. The IC features a small outline package style, Gull Wing terminal form, and nickel palladium gold silver finish.
TJA1042TK/3/1J
NXP Semiconductors' TJA1042TK/3/1J is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, has a supply voltage of 5V, and consumes only 0.07 mA. Ideal for automotive applications due to its small outline package style and dual terminal position.
TJA1051T/3/1J
NXP Semiconductors' TJA1051T/3/1J is a CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm and supports surface mount assembly.
TJA1051T/3,118
NXP Semiconductors' TJA1051T/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It operates in automotive grade temperatures (-40 to 125°C) and has AEC-Q100 screening level for reliability. With a small outline package style, it's ideal for automotive network interfaces.
TJA1051TK/3/1J
NXP's TJA1051TK/3/1J is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, operating at 5V. It features a small outline package with 8 terminals and peak reflow temp of 260°C. Ideal for automotive applications requiring high-speed network interfaces in compact spaces.
TJA1050T/CM,118
TJA1050T/CM,118 by NXP Semiconductors is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This small outline package is commonly used in automotive applications.
TJA1042TK/3,118
NXP Semiconductors' TJA1042TK/3,118 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. Operating b/w -40 to 125 °C, it supports data rates up to 1 Mbps. Ideal for automotive applications requiring a compact, low-power interface circuit.
TJA1043T,118
NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.
TJA1042T/3/1J
NXP Semiconductors' TJA1042T/3/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and supports a 5V supply voltage. Ideal for interface circuits in automotive applications due to its robust design and high-temperature tolerance.
TJA1051T/3/CM,118
NXP Semiconductors' TJA1051T/3/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features 8 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures high reliability in harsh environments.
TJA1042T/3/CM,118
NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.
TJA1043T/1J
NXP Semiconductors' TJA1043T/1J is a 14-terminal interface circuit with AEC-Q100 screening. It operates at 5V nominal voltage, suitable for automotive applications. With small outline package style and gull wing terminal form, it measures 8.65mm x 3.9mm x 1.75mm for compact designs.
TJA1042T/1J
NXP Semiconductors' TJA1042T/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and supports a nominal voltage of 5V. Ideal for interface circuits in automotive applications requiring robust communication solutions.
TJA1040T/CM,118
NXP Semiconductors' TJA1040T/CM,118 is a CMOS interface circuit with 8 terminals and 1 Mbps data rate. It operates at 5V supply voltage, consuming 0.07 mA current. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
TJA1021TK/20/C,118
NXP Semiconductors' TJA1021TK/20/C,118 is a LIN transceiver with 8 terminals. It operates b/w -40 to 150°C, suitable for automotive applications. The package style is small outline with a max seated height of 0.8mm, making it ideal for space-constrained designs.
TJA1051T/E/1J
NXP Semiconductors' TJA1051T/E/1J is an AEC-Q100 compliant CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm, making it ideal for space-constrained designs.
TJA1051T/E,118
NXP Semiconductors' TJA1051T/E,118 is a CAN transceiver with 1 Mbps data rate and 5V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. This small outline package with gull wing terminals is ideal for automotive network interfaces.
TJA1051T/1J
TJA1051T/1J by NXP Semiconductors is a CAN transceiver with 8 terminals, operating at 5V and supporting data rates up to 1 Mbps. It has a temperature range of -40 to 125°C, making it suitable for automotive applications. The package style is small outline with gull wing terminals, ideal for surface mount designs.
TJA1042T/3,112
NXP Semiconductors' TJA1042T/3,112 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved