Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Microchip USA
$1.587
AZTECH Wire
$18.380
One Stop Electronics
$43.500
UNI Independent Distributors
Corphita
Peripheral Drivers PIP3119-P,127 attributes and parameters. Explore more Peripheral Drivers devices from NXP Semiconductors
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Turn-off Time:
Turn-on Time:
PIP3119-P,127 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Sensitron Semiconductor
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
BTS3035EJXUMA1
BTS3035EJXUMA1 by Infineon is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 3V to 5.5V and has a nominal output peak current limit of 5A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
NCP5106BDR2G
NCP5106BDR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications requiring high side drivers with peak current limit of 0.5A. The device has fast turn-on/off times of 0.17us and can withstand temperatures from -40 to 125°C.
ULN-2804A
Sprague Electric
ULN-2804A by Sprague Electric is an 8-bit peripheral driver with open-collector output and transient protection. It operates at 50V, has 18 terminals, and a ceramic-metal-sealed co-fired package. Ideal for buffering or inverting signals in various electronic applications.
SZNUD3160LT1G
SZNUD3160LT1G by Onsemi is a small outline, thin profile peripheral driver with built-in transient protection. Operating temperature range from -40 to 125°C makes it suitable for automotive applications. With sink output current flow direction and AEC-Q101 screening level, it's ideal for various automotive electronic systems.
DRV103H/2K5
Texas Instruments
DRV103H/2K5 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections against transient, over current, and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.
UDN2987A-6
Allegro MicroSystems
Allegro MicroSystems' UDN2987A-6 is a bipolar peripheral driver with 8-bit driver. It operates b/w -20°C to 85°C, with max output current of 0.35 A at power supplies of 4.75V to 35V. The rectangular in-line package with dual terminals makes it ideal for various applications requiring precise motor control and signal amplification.
NCV8452STT1G
NCV8452STT1G by Onsemi is a peripheral driver with a max supply voltage of 34V and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5V and has a turn-on/off time of 120us. This small outline package is ideal for buffer or inverter-based applications requiring a peak output current limit of 3A.
UCC23513DWYR
UCC23513DWYR by Texas Instruments is a peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle a max output current of 4.5A. With Schmitt trigger input characteristics, it serves as a buffer or inverter based peripheral driver for various applications.
FPF1321UCX
FPF1321UCX by Onsemi is a 6-terminal peripheral driver with a supply voltage range of 1.5V to 5.5V, ideal for industrial applications. It features a very thin profile package style, ball terminal form, and operates in temperatures ranging from -40°C to 85°C. The interface IC type is buffer or inverter based with source output current flow direction.
TBD62083AFG
Toshiba
Toshiba's TBD62083AFG is an 8-bit buffer/inverter peripheral driver with a max output current of 0.4A, suitable for industrial applications. It operates b/w -40 to 85°C, with built-in transient protection and a terminal pitch of 1.27mm in a small outline package style.
XLMG1210RVRT
XLMG1210RVRT by Texas Instruments is a peripheral driver with max supply voltage of 5.25V, thermal protection, and 19 terminals. Ideal for automotive applications, it has a turn-on time of 0.018us and operates b/w -40 to 125 °C.
TBD62783AFG,EL
Toshiba's TBD62783AFG,EL is a peripheral driver with 8 functions and a max supply voltage of 50V. It is used as a buffer or inverter based peripheral driver for various applications.
ULN-2064B
Vishay Sprague
Vishay Sprague's ULN-2064B is a 16-terminal peripheral driver with bipolar technology. It operates b/w -20°C to 85°C, featuring tin/lead finish and through-hole terminals. Ideal for applications requiring a 4-bit driver in an in-line rectangular package.
BTS141BKSA1
BTS141BKSA1 by Infineon is a MOS technology peripheral driver with 12V nominal voltage and 12A output peak current limit. It offers overcurrent, overvoltage, and thermal protections, making it ideal for applications requiring sink output current flow direction in automotive systems. The package style is flange mount with a rectangular shape and single terminal position.
VNQ7040AYTR-E
STMicroelectronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
MAX14914BATE+
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
FPF2101
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
PTPS1HC100BQPWPRQ1
PTPS1HC100BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 14 terminals, operating voltage range of 3-28V, and AEC-Q100 screening. It offers built-in protections for transient and over current events. Ideal for automotive applications due to its high side driver feature and compact rectangular package design.
CSD88599Q5DCT
CSD88599Q5DCT by Texas Instruments is a half bridge based peripheral driver with a max supply voltage of 54V and operating temperature range of -55 to 150°C. With 22 terminals in a small outline package, it is ideal for applications requiring source and sink output current flow direction in military-grade environments.
TPS1H200AQDGNRQ1
TPS1H200AQDGNRQ1 by Texas Instruments is a high side driver with 40V max supply voltage, 4V min supply voltage, and 125°C max operating temp. Ideal for automotive applications due to AEC-Q100 screening level and built-in protections against transient, over current, and thermal issues.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PIP3115-B
NXP Semiconductors
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Qualification: Not Qualified;
PIP3103-T
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
PIP3118-B,118
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED;
PIP3105-P,127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
PIP3117-B/T3
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
PIP3104-P,127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Nominal Supply Voltage: 13 V;
PIP3118-B/T3
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G2;
PIP3101-A,127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Turn-on Time: 5 us; Package Style (Meter): FLANGE MOUNT;
PIP3115-B,118
PIP3103-T,115
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
PIP3117-B,118
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
PIP3115-B/T3
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
PIP3104-P
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Qualification: Not Qualified;
PIP3118-B
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Turn-on Time: 50 us;
PIP3102-R,118
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; No. of Functions: 1;
PIP3105-P
PIP3101-A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Turn-off Time: 30 us; Turn-on Time: 5 us;
PIP3102-R
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
PIP3103-TT/R
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Turn-on Time: 12 us;
PIP3117-B
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved