Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: HSIP; Package Shape: RECTANGULAR; Maximum Seated Height: 12.95 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
One Stop Electronics
$3.500
Advanced Electronics
$3.671
$3.341
$3.010
Microchip USA
$5.332
Native Components
$5.870
AZTECH Wire
$8.610
Corohmni
$9.841
UNI Independent Distributors
Corphita
Northwest PG Solutions
$5.753
Peripheral Drivers BUK149-50DL,127 attributes and parameters. Explore more Peripheral Drivers devices from NXP Semiconductors
Built-in Protections:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
BUK149-50DL,127 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Starsea Electronics
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
DS2482S-800+T&R
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2003V12DR
ULN2003V12DR by Texas Instruments is a 7-bit peripheral driver with inverted output polarity and sink current flow direction. It operates b/w -40 to 125°C, has a nominal voltage of 50V, and offers transient protection. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
VND14NV04-E
STMicroelectronics
VND14NV04-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It has 2 terminals in a small outline package style with Gull Wing terminal form. Ideal for applications requiring an interface IC type of buffer or inverter based peripheral driver.
FPF2110
FPF2110 by Onsemi is a MOS technology-based peripheral driver with built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V, making it suitable for industrial applications requiring a max output current of 0.8 A in a compact package style measuring 2.9mm x 1.6mm x 1.4mm.
NX18P3001UKZ
NXP Semiconductors
NX18P3001UKZ by NXP Semiconductors is a Peripheral Driver with 12 terminals, operating at -40 to 85°C. It has a voltage range of 5.4-16V and comes in a rectangular plastic/epoxy package suitable for industrial applications. The package style is grid array with fine pitch, making it ideal for surface mount designs.
TPS22965DSGR
TPS22965DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 2.5V to 5.7V and built-in transient protection. Ideal for industrial applications requiring source/sink current flow control in compact designs.
LM3526MX-L/NOPB
LM3526MX-L/NOPB by Texas Instruments is a Peripheral Driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for automotive applications requiring a max supply current of 0.2mA and nominal output peak current limit of 1.2A.
ADUM3223BRZ-RL7
Analog Devices
ADUM3223BRZ-RL7 by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3V to 5.5V, and built-in thermal and under voltage protections. It is used in automotive applications due to its small outline package style and gull wing terminal form for reliable performance in harsh environments.
TPS22810TDBVRQ1
TPS22810TDBVRQ1 by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It operates b/w -40 to 105 °C and supports a supply voltage range of 2.7V to 18V. Built-in protections include thermal and under voltage, making it ideal for industrial applications requiring sink output current flow direction.
FPF2125
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
VND5N07TR-E
VND5N07TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 5V nominal voltage, has a turn-on time of 0.25us, and can handle output peak current limit of 5A. Ideal for applications requiring sink output current flow direction in compact spaces.
IRS44262SPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ITS4200SMEOHUMA1
Infineon Technologies
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;
L293DN
Unitrode
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V; Output Current Flow Direction: SOURCE AND SINK;
BSP742RXUMA1
BSP742RXUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5 V and has a max supply voltage of 34 V. This small outline package driver is ideal for applications requiring buffer or inverter based peripheral drivers with a sink output current flow direction.
TPS25221DBVR
TPS25221DBVR by Texas Instruments is a small outline, low profile peripheral driver with thermal protection. It operates in automotive temperature grades from -40 to 125°C. With turn-on time of 3000us and turn-off time of 700us, it's ideal for buffer or inverter based applications.
TBD62083AFNG(Z)
Toshiba
Toshiba TBD62083AFNG(Z) is an 8-bit BCDMOS peripheral driver with a max output current of 0.4A. It operates b/w -40 to 85°C, suitable for industrial applications. The driver features built-in transient protection and can sink current flow up to 25V, making it ideal for various electronic systems.
BTS5215L
BTS5215L by Infineon is a MOS technology peripheral driver with 2 functions, operating at 5.5-40V, ideal for automotive applications. It offers built-in protections against transient, over/under voltage & current, thermal issues. With a max output current of 4.7A and turn-on/off time of 250/270us, it's suitable for various automotive electronic systems.
FPF2124
FPF2124 by Onsemi is a MOS technology-based peripheral driver with 5 terminals and built-in protections. It operates b/w -40 to 85 °C, with a supply voltage range of 1.8-5.5 V. Ideal for industrial applications requiring a compact, low-profile design and peak current limit of 0.8 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BUK109-50DL,118
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Output Current Flow Direction: SINK; Qualification: Not Qualified;
BUK1M200-50SGTD,11
Nexperia
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Width: 7.5 mm;
BUK1M200-50SGTD,51
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G20;
NXP Semiconductors' BUK1M200-50SGTD,51 is a Peripheral Driver with 4 functions and built-in protections against transient, over current, over voltage, and thermal issues. This small outline package has 20 terminals in a gull wing form with a turn-on time of 12 us and turn-off time of 65 us. It is ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
BUK101-50GL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 100 A;
BUK106-50-LP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER VOLTAGE; THERMAL; Terminal Position: SINGLE;
BUK102-50DL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;
BUK106-50S
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Package Style (Meter): FLANGE MOUNT;
BUK102-50GS
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
BUK106-50S127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; JESD-30 Code: R-PSFM-T5; Output Current Flow Direction: SINK;
BUK104-50L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; JESD-30 Code: R-PSFM-T5;
BUK106-50L127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Minimum Supply Voltage: 4 V; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE;
BUK101-50GS,127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
BUK106-50-LP127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Qualification: Not Qualified; JESD-30 Code: R-PSFM-T5;
BUK101-50DL-T
BUK104-50LP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;
BUK101-50GL127
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-220; Package Shape: RECTANGULAR; JESD-30 Code: R-PSFM-T3;
BUK104-50S
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
BUK104-50SP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved