Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF Small Signal Field-Effect Transistors;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Flip Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Anansix
ACDS - Activité Composants Distribution Service
Native Components
$0.643
Northwest PG Solutions
$0.707
One Stop Electronics
$35.050
UNI Independent Distributors
Corphita
Kepictronics
Authorized Procurement Solutions
BLF183XR Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
ROHM
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
MPF102G
Onsemi
MPF102G by Onsemi is an N-CHANNEL RF FET with a 25V DS breakdown voltage, ideal for AMPLIFIER applications in the VERY HIGH FREQUENCY BAND. Featuring a DEPLETION MODE operation, it has a max power dissipation of 0.2W and can withstand up to 125 °C operating temperature.
BF998A-GS08
Vishay Telefunken
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Form: GULL WING; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND; Case Connection: SOURCE;
SHF-0189Z
Sirenza Microdevices
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Field Effect Transistor Technology: HETERO-JUNCTION; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
SAV-541+
Mini-circuits
Mini-circuits SAV-541+ is a single N-channel RF FET with 15 dB min power gain, ideal for amplifier applications. Operating in enhancement mode, it offers high electron mobility technology and can handle up to 0.12 A drain current. With a max power dissipation of 0.36 W and operating temperature of 85°C, this transistor is suitable for C band frequencies.
BF556B-T
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Highest Frequency Band: VERY HIGH FREQUENCY BAND; Package Shape: RECTANGULAR; Field Effect Transistor Technology: JUNCTION;
BF245C,112
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N3823
Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: DEPLETION MODE; JEDEC-95 Code: TO-206AF; Terminal Form: WIRE;
MPF102RLRM
MPF102RLRM by Onsemi is an N-CHANNEL RF FET with a 25V DS Breakdown Voltage. Ideal for AMPLIFIER applications, it operates in DEPLETION MODE at up to 125 °C. Featuring a VERY HIGH FREQUENCY BAND, this transistor has 3 terminals and a max Crss of 3pF.
ATF-50189-TR1
Agilent Technologies
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Drain Current (Abs) (ID): 1 A; Field Effect Transistor Technology: HIGH ELECTRON MOBILITY; JESD-30 Code: R-PSSO-F3;
BF908R-TAPE-13
BF908R-TAPE-13 by NXP Semiconductors is an N-channel RF FET designed for amplifier applications. It features a max DS breakdown voltage of 12V, operates in dual gate depletion mode, and supports ultra-high frequency bands. Its compact surface mount design ensures efficient performance in various electronic circuits.
MMBFJ305
National Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Transistor Element Material: SILICON; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
BF998T/R
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; No. of Elements: 2;
J308ZL1
J308ZL1 by Onsemi is an N-CHANNEL RF FET with 25V DS breakdown voltage, ideal for AMPLIFIER applications in the ULTRA HIGH FREQUENCY BAND. Featuring a SINGLE configuration, it has a Crss of 2.5 pF and comes in a CYLINDRICAL package with TIN LEAD finish.
933978500112
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Position: RADIAL; Package Style (Meter): DISK BUTTON; Terminal Form: FLAT;
BF901-TAPE-13
BF901-TAPE-13 by NXP Semiconductors is an N-channel RF FET designed for amplifier applications. It features a 12V min DS breakdown voltage, operates in the ultra-high frequency band, and supports dual gate enhancement mode. This compact surface mount device ensures reliable performance up to 150 °C.
2N5484RLRE
Onsemi's 2N5484RLRE is an N-CHANNEL RF FET with 16 dB Gp, ideal for AMPLIFIER applications in the ULTRA HIGH FREQUENCY BAND. It features a PLASTIC/EPOXY package, DEPLETION MODE operation, and SILICON transistor element. With 0.03 A ID and 1 pF Crss, this THROUGH-HOLE transistor offers high performance in a CYLINDRICAL package.
BF545B-TAPE-7
BF545B-TAPE-7 by NXP Semiconductors is an N-channel RF FET designed for amplifier applications. It features a 30V min DS breakdown voltage, operates in depletion mode, and supports very high frequency bands. This compact surface mount transistor ensures reliable performance up to 150 °C.
3SK264
N-CHANNEL; Maximum Power Dissipation Ambient: .2 W; Maximum Drain Current (ID): .03 A; Field Effect Transistor Technology: METAL SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .03 A;
934058936115
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Transistor Element Material: SILICON; Maximum Drain Current (ID): .03 A; Minimum DS Breakdown Voltage: 6 V;
BF256ARL
BF256ARL by Onsemi is an N-CHANNEL RF FET with 30V DS Breakdown Voltage. Operating in DEPLETION MODE, it offers ULTRA HIGH FREQUENCY performance. Ideal for applications requiring high frequency amplification in a CYLINDRICAL package with THROUGH-HOLE terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLF188XRU
Ampleon Netherlands B V
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND; Reference Standard: IEC-60134; Case Connection: SOURCE;
BLF184XRU
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND; Terminal Form: FLAT; JESD-30 Code: R-CDFM-F4;
BLF184XRSU
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; JESD-30 Code: R-CDFP-F4; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
BLF184XRS
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Minimum Power Gain (Gp): 22.8 dB; Case Connection: SOURCE; Terminal Position: DUAL;
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Transistor Element Material: SILICON; Operating Mode: ENHANCEMENT MODE; Minimum Power Gain (Gp): 22.8 dB;
BLF184XR
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Case Connection: SOURCE; Package Style (Meter): FLANGE MOUNT; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
BLF184XR by NXP Semiconductors is an N-CHANNEL RF FET with 135V DS Breakdown Voltage, 22.8 dB Power Gain, and operates in the ULTRA HIGH FREQUENCY BAND. It is commonly used as an AMPLIFIER in applications requiring a COMMON SOURCE configuration. The transistor comes in a CERAMIC, METAL-SEALED COFIRED package with FLANGE MOUNT style for surface mounting.
BLF183XRS
BLF188XR
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Terminal Form: FLAT; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND; Moisture Sensitivity Level (MSL): NOT APPLICABLE;
BLF188XR,112
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Terminal Form: FLAT; Operating Mode: ENHANCEMENT MODE; No. of Terminals: 4;
BLF188XRS
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Package Shape: RECTANGULAR; Transistor Application: AMPLIFIER; Terminal Form: FLAT;
BLF183XR
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Elements: 2;
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Reference Standard: IEC-60134; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
BLF183XRU
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-30 Code: R-CDFM-F4; No. of Terminals: 4;
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
BLF183XRSU
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Case Connection: SOURCE; Terminal Position: DUAL; Transistor Element Material: SILICON;
BLF188XRSU
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Minimum DS Breakdown Voltage: 135 V; Package Style (Meter): FLATPACK; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved