Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Nexperia PDTD113EUF is a NPN BJT transistor with built-in resistor for switching applications. It has a hFE of 33, Vce of 50V, and IC of 0.5A. This small outline package with gull wing terminals is surface mountable and made of silicon, suitable for high-frequency operations up to 225MHz.
Median Price
$0.092
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.095
1k+ parts
$0.079
10k+ parts
$0.070
Verical
$0.088
Chip Stock
Vyrian
Advanced Electronics
$0.591
$0.538
$0.485
AZTECH Wire
$11.340
Supply Digital
Provides durable and lightweight housing for the transistor, ensuring reliable performance and easy handling.
NPN transistors are commonly used in amplification and switching applications, offering versatility in circuit design.
The built-in resistor simplifies circuit design and reduces component count, making the transistor easier to integrate into systems.
Ideal for switching applications, allowing for fast and efficient control of current flow in electronic circuits.
Suitable for surface-mount soldering, enabling easy and efficient PCB assembly.
Rectangular shape facilitates efficient placement and mounting on PCBs, optimizing use of space.
Gull wing terminals provide secure and reliable solder connections during PCB assembly.
Simple 3-terminal configuration for easy connection in circuits, reducing complexity in circuit design.
Compact small outline package design saves space on the PCB, ideal for applications with size constraints.
A minimum DC current gain of 33 ensures consistent amplification performance in various circuit applications.
With a maximum voltage rating of 50V, the transistor can handle moderate voltage levels in switching circuits.
Silicon-based transistor element offers high performance, reliability, and efficiency in electronic circuits.
Ability to handle a maximum collector current of 0.5A, suitable for low to medium power applications.
Tin terminal finish provides good solderability, ensuring secure and durable connections during assembly.
Dual terminal position allows for flexibility in circuit layout and connection options.
With a maximum reflow time of 30 seconds, the transistor can withstand typical reflow soldering processes.
Peak reflow temperature of 260°C complies with standard reflow soldering temperatures, ensuring proper soldering of the transistor.
Compliance with industry standards ensures quality and reliability for automotive and general electronic applications.
High nominal transition frequency of 225 MHz allows for fast switching speeds in high-frequency applications.
Small Signal Bipolar Junction Transistors (BJT) PDTD113EUF attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Nexperia
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
PDTD113EUF Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Mult Dev 04/Oct/2022
PCN Packaging - Label Chg 12/Mar/2017 All Dev Label Chgs 2/Aug/2020
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
1554216004
Molex
WIRE AND CABLE;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Daco Semiconductor
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductors
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
MMBT2222A
General Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
2N3904
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .2 A;
BC817-40
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A;
MMBT3904
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Maximum Operating Temperature: 150 Cel;
2N3906
Nte Electronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Transistor Element Material: SILICON;
MMBT2222ATT1G
MMBT2222ATT1G by Onsemi is a NPN BJT transistor with 40V VCEO, 0.6A IC, and 300MHz fT. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals for surface mount assembly. With a max operating temp of 150°C, it offers fast switching times of 35ns (ton) and 285ns (toff).
Vishay Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Package Shape: ROUND;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BC846B,235
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
BC846BPDW1T1G
BC846BPDW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types. It has a max VCEsat of 0.65V, hFE of 200, and fT of 100MHz. Ideal for amplifier applications due to its small outline package style and dual terminal position for surface mount assembly.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
MMBT3906
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
Promax-johnton
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .6 A; Package Body Material: PLASTIC/EPOXY; Maximum Turn Off Time (toff): 285 ns;
BC847C
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .2 A;
2N2222AUB
Microsemi
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A; Maximum Turn On Time (ton): 35 ns;
JANTX2N2222AUA
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; No. of Terminals: 4; Terminal Form: NO LEAD;
BC807-40W,115
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Package Style (Meter): SMALL OUTLINE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74AUP1G17GX4
BUFFER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
MJD31CA
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A;
BAS21TH
74LV1T08GW
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
BUK9K13-60RA
Power Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1;
MJD32C
Power Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260;
MJD45H11
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 80 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
BUK7S0R7-40H
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
BCP56H
Small Signal Bipolar Transistors; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
PUSB3BB2DF
74LVC1G14GX4
INVERTER; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
74HC4053PW
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXB0104BQ
BUS TRANSCEIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
74AVC8T245BQ
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
NCR421PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR;
PSMNR51-25YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Tin (Sn);
PMEG120G20ELR
NXS0104PW-Q100
BUS TRANSCEIVER; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); Moisture Sensitivity Level (MSL): 1;
PESD2ETH1G-T
PESD2ETH1G-T by Nexperia is a transient suppression device with common cathode configuration, 2 elements, and bidirectional polarity. It operates b/w -55 to 150 °C and has a max reverse voltage of 24 V. Ideal for protecting electronic circuits from voltage spikes in automotive and industrial applications.
GAN063-650WSA
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
PDTD113ZT,215
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .5 A; No. of Terminals: 3; JESD-30 Code: R-PDSO-G3;
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL;
PDTD113ZT
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDSO-G3;
Philips Semiconductors
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A; JESD-609 Code: e0; Minimum DC Current Gain (hFE): 70;
PDTD123YT,215
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY;
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Maximum Collector-Emitter Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
PDTD143XTVL
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 225 MHz; Maximum Collector Current (IC): .5 A; Package Style (Meter): SMALL OUTLINE;
PDTD143XT,215
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 225 MHz; Maximum Collector Current (IC): .5 A; No. of Elements: 1;
PDTD143ETR
PDTD113ZUX
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 225 MHz; Maximum Collector Current (IC): .5 A; Peak Reflow Temperature (C): 260;
PDTD113ZTVL
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
PDTD143XTR
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 225 MHz; Maximum Collector Current (IC): .5 A; JESD-609 Code: e3;
PDTD113EU
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 225 MHz; Maximum Collector Current (IC): .5 A; Transistor Element Material: SILICON;
PDTD113EU,135
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 225 MHz; Maximum Collector Current (IC): .5 A; Additional Features: BUILT IN BIAS RESISTANCE RATIO IS 1;
PDTD113EQA
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 210 MHz; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY;
PDTD113ES
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A; Terminal Form: THROUGH-HOLE;
PDTD113ZU
PDTD113ZK
PDTD113ET
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A; Peak Reflow Temperature (C): 260;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved