Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.140
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$0.105
100+ parts
-
1k+ parts
10k+ parts
$0.051
Mouser Electronics
$0.380
$0.192
$0.159
$0.144
Verical
$0.129
Rochester
$0.148
$0.123
$0.109
TTI
$0.146
Chip1Stop
$0.124
Farnell
$0.133
$0.125
EBV Elektronik
Element14
$0.337
$0.283
$0.255
Digiode
$0.115
Nova Conductors
$0.205
Chip Stock
IBS Electronics
$0.216
NAC Semi
$0.203
Vyrian
Anansix
VNN
ComSIT Distribution GmbH
Ampacity Inc.
$0.088
Semicontronic
$0.089
$0.087
$0.086
Corphita
AZTECH Wire
$0.150
Argo Parts USA
$0.185
$0.179
Aranea Global
$0.201
$0.193
Corohmni
Advanced Electronics
$0.209
$0.199
Microchip USA
$1.200
Aztec Data Supply Inc.
$14.270
Perfect Parts
Eastek
$0.340
Continental Prestige Electronics
$0.252
$0.164
$0.130
Authorized Procurement Solutions
iodParts Technologies Inc.
UNI Independent Distributors
Supply Digital
Multiplexers & Switches 74HC4051PW-Q100,11 attributes and parameters. Explore more Multiplexers & Switches devices from Nexperia
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
74HC4051PW-Q100,11 Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Assembly Site Add 31/Dec/2018
PCN Packaging - Label Chg 12/Mar/2017 All Dev Label Chgs 2/Aug/2020
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Microsemi
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Vicor
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
ADG1208YRUZ-REEL7
ADG1208YRUZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a max supply voltage of ±16.5V and has a max on-state resistance of 200 ohm. With a temperature grade of automotive, it is suitable for applications requiring high-speed switching in harsh environments.
TS12A12511DCNR
TS12A12511DCNR by Texas Instruments is a SPDT switch with 8 terminals, operating at -40 to 85°C. It has a low profile design, 0.65mm terminal pitch, and offers 70dB isolation. Ideal for industrial applications requiring fast switching with minimal on-state resistance of 1 ohm.
TS3DDR3812RUAR
TS3DDR3812RUAR by Texas Instruments is a dual-function single-ended multiplexer with 12 channels and 42 terminals. It operates at a supply voltage of 3.3V, has a max bandwidth of 1675 kHz, and offers an on-state resistance of 12 ohms. Ideal for industrial applications requiring high-speed switching with low power consumption.
ADG619BRMZ-REEL7
ADG619BRMZ-REEL7 by Analog Devices is a CMOS SPDT switch with 8 terminals, operating at -40 to 85°C. It has a max on-state resistance of 6.5 ohm and switching time of 120 ns. Ideal for industrial applications requiring common output signal switching in compact designs.
MAX313FESE+T
Analog Devices' MAX313FESE+T is a CMOS SPST multiplexer with 4 functions, 16 terminals, and a package style of small outline. It operates b/w -40 to 85°C, has a max on-state resistance of 10 ohm, and is ideal for industrial applications requiring high-speed switching.
77052012A
Defense Logistics Agency
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
MC74HC4852ADTR2G
MC74HC4852ADTR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at -55 to 125 °C, with Vsup ranging from 2-6V. With a max on-state resistance of 1300 ohm and switching type as break-before-make, it's ideal for military-grade applications requiring precise signal routing.
DG508ACJ
Multiplexers or Switches; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
PCA9548ADW
PCA9548ADW by Texas Instruments is a dual-function multiplexer with 2 channels, operating voltage range of 2.3V to 5.5V, and on-state resistance of 45 ohm. It comes in a small outline package suitable for surface mount applications. Ideal for systems requiring separate output control in temperature range -40°C to 85°C.
ADG819BRMZ
ADG819BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 1.4 ohm and nominal off-state isolation of 71 dB. This CMOS technology-based switch operates at a temperature range from -40 to 125 °C, making it suitable for automotive applications requiring fast switching times and low resistance.
MAX4714EXT-T
Maxim Integrated
MAX4714EXT-T by Maxim Integrated is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 2.5 ohm and offers 54 dB isolation. Ideal for industrial applications requiring fast switching times and precise control in compact designs.
DG408DY-T1
Temic Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
DG403DYZ-T
Renesas Electronics
Renesas Electronics DG403DYZ-T is a SPDT switch with 2 functions, operating at -40 to 85°C. It has a max on-state resistance of 45 ohm and fast switching times of 150 ns on and 100 ns off. This industrial-grade CMOS switch is ideal for applications requiring high-speed signal routing in compact spaces.
ADG709BRUZ
ADG709BRUZ by Analog Devices is a 16-terminal CMOS multiplexer with a max operating temperature of 125°C. It features a common output, differential multiplexer type, and small outline thin profile package style. Ideal for automotive applications due to its break-before-make switching and high off-state isolation of 60 dB.
CD4051BM96E4
CD4051BM96E4 by Texas Instruments is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-20V and offers a max on-state resistance of 1050 ohm. With a compact rectangular package, it is ideal for military-grade applications requiring precise signal switching in harsh environments.
74LVC1G66GW
Philips Semiconductors
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG5436FBRUZ-RL7
ADG5436FBRUZ-RL7 by Analog Devices is a SPDT multiplexer with 2 functions, operating at -40 to 125°C. It has a max on-state resistance of 11.2 ohm and can handle supply voltages from -16.5V to 16.5V. Ideal for automotive applications due to its small outline package and separate output feature.
TS3A44159RGTR
TS3A44159RGTR by Texas Instruments is a CMOS SPDT switch with 2 functions, 4 channels, and 0.8 ohm max on-state resistance. Operating at -40 to 85 °C, it has a nominal bandwidth of 35 kHz. Ideal for industrial applications requiring high isolation and low on-state resistance.
CD4066BPWR
CD4066BPWR by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm Ron, and 40 kHz bandwidth. It operates at -55 to 125 °C, with a supply voltage range of 3-18 V. Ideal for military-grade applications requiring low on-state resistance and high bandwidth in a compact SOT package.
DG412DY
Harris Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCP53H
Small Signal Bipolar Transistors; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
BUK9K13-60RA
Power Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1;
PSMNR51-25YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Tin (Sn);
NCR320U
LED DISPLAY DRIVER; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
MJD44H11A
The Nexperia MJD44H11A is a NPN BJT transistor with VCEsat of 1V, hFE of 40, and IC of 8A. Ideal for switching applications, it has a max operating temp of 150°C and collector-emitter voltage of 80V. With a package style of small outline and surface mount capability, it offers high performance in power electronics.
74AUP1G17GX4
BUFFER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
PMEG060T050ELPE
74LV1T08GW
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
BUK7V4R2-40H
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
PESD3V3T1BL
BAS21TH
PNE20030EP
BUK6D22-30E
GAN041-650WSB
Power Field-Effect Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn);
NCR421PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR;
BAS16TH
LSF0102DC
Level Translators; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); JESD-609 Code: e4;
74LVC1G14GX4
INVERTER; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
PUSB3BB2DF
NXS0104PW-Q100
BUS TRANSCEIVER; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); Moisture Sensitivity Level (MSL): 1;
74HC4051D,653
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4051D,653 is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a peak reflow temperature of 260°C and a nominal off-state isolation of 50dB. Ideal for automotive applications due to its small outline package and dual terminal position.
74HC4051PW,118
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4051PW,118 is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-10V and offers a max on-state resistance of 180 ohm. With a compact design and automotive temperature grade, it is ideal for applications requiring precise signal switching in tight spaces.
74HC4067PW,118
NXP Semiconductors' 74HC4067PW,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a peak reflow temperature of 260°C, on-state resistance of 130 ohm, and switching behavior as break-before-make. Ideal for automotive applications due to its wide operating temperature range (-40 to 125°C) and small outline package style (7.8mm x 4.4mm).
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4052D,653
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4052D,653 is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125°C and has a max on-state resistance of 195 ohm. With a small outline package style, it's ideal for automotive applications requiring fast switching times and low on-state resistance.
74HC4051D
Toshiba
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4051D is an 8-channel CMOS multiplexer with a max on-state resistance of 180 ohm and switching type of BREAK-BEFORE-MAKE. It operates at temperatures ranging from -40 to 125 °C, making it suitable for automotive applications requiring high isolation (50 dB) and low signal current (0.025 A).
74HC4067DB,118
NXP Semiconductors' 74HC4067DB,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a nominal off-state isolation of 50dB, on-state resistance match of 6 ohm, and peak reflow temperature of 260°C. Ideal for automotive applications due to its small outline package and dual terminal position.
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4066D,653
NXP Semiconductors' 74HC4066D,653 is a CMOS SPST switch with 4 functions, operating at -40 to 125°C. It has a max on-state resistance of 142 ohm and switching time of 30 ns. Ideal for automotive applications due to its small outline package and make-before-break switching feature.
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HCT4051D,118
74HC4051BQ,115
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors' 74HC4051BQ,115 is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-10V and offers a max on-state resistance of 180 ohm. With a compact chip carrier package, it is ideal for automotive applications requiring fast switching times and low power consumption.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved