Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.117
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.120
100+ parts
$0.060
1k+ parts
$0.049
10k+ parts
$0.043
Mouser Electronics
$0.150
$0.066
$0.059
$0.041
Newark
$0.210
-
Distrelec
$0.228
$0.152
$0.087
Avnet
$0.135
Verical
$0.034
Farnell
$0.092
$0.090
Element14
$0.113
$0.095
$0.093
Chip1Stop
EBV Elektronik
Rochester
$0.099
$0.082
$0.073
Arrow
$0.044
Digiode
$0.035
TME
$0.100
$0.068
$0.054
$0.052
Nova Conductors
$1.000
IBS Electronics
$0.264
NAC Semi
$0.418
Chip Stock
Flip Electronics
Vyrian
Martec Srl
Bristol Electronics
Anansix
Contempo Components LLC
Cyclops Electronics Ltd
VNN
Speed Components Ltd
Sensible Micro Corp
Prism Electronics
Semi Source
Semicontronic
$0.029
$0.028
Corphita
$0.033
Component Stockers USA
$0.040
$0.030
AZTECH Wire
Ampacity Inc.
$0.063
Argo Parts USA
$0.098
Aranea Global
$0.980
$0.941
Advanced Electronics
$2.716
$2.580
Modulus Dynamics
$15.468
Aztec Data Supply Inc.
$21.830
Perfect Parts
GreenTree Electronics
Eastek
$0.050
Glotronic Ltd.
Futuretech Components
Continental Prestige Electronics
$0.134
$0.080
iodParts Technologies Inc.
Lucentia Tech
$14.578
$14.281
Robosynatics
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Supply Digital
A-Z Elektronik GmbH
UNI Independent Distributors
Corohmni
Speed Components Ltd (Excess)
Multiplexers & Switches 74LVC1G3157GW,125 attributes and parameters. Explore more Multiplexers & Switches devices from Nexperia
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
74LVC1G3157GW,125 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - 74LVCYYY 15/Jan/2017 Mult Dev Drawing Chg 14/Feb/2022
PCN Assembly/Origin - 74AHCx/74AUPx/74AVCx/74LVx 29/Jun/2022
PCN Packaging - All Dev Label Chgs 2/Aug/2020 Logo 10/Dec/2016
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
DS18B20
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
DG403DYZ
Intersil
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG508AKRZ
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4051D,653
NXP Semiconductors' 74HC4051D,653 is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a peak reflow temperature of 260°C and a nominal off-state isolation of 50dB. Ideal for automotive applications due to its small outline package and dual terminal position.
DG408DQ-T1-E3
Vishay Intertechnology
Vishay Intertechnology's DG408DQ-T1-E3 is a CMOS single-ended multiplexer with 8 channels. It operates at industrial temperature grade, with a max supply voltage of 20V and on-state resistance of 100 ohm. Ideal for applications requiring high isolation (75 dB) and fast switching times (150 ns).
CD4053BE
Thomson Consumer Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS2116DRLR
TPS2116DRLR by Texas Instruments is a dual-channel single-ended multiplexer with a max on-state resistance of 0.04 ohm and common output. It operates b/w -40 to 125°C, making it suitable for automotive applications. This small outline switch has a terminal pitch of 0.5mm and can handle supply voltages from 1.6V to 5.5V efficiently.
MAX4886ETO+T
Analog Devices
Analog Devices' MAX4886ETO+T is a 4-function multiplexer with 42 terminals, operating at -40 to 85°C. With a supply voltage of 3-3.6V, it offers separate outputs and low on-state resistance of 11 ohm. Ideal for industrial applications requiring audio/video switching in compact spaces.
ADG1434YRUZ
ADG1434YRUZ by Analog Devices is a 20-terminal SPDT multiplexer with 4 channels. It operates at -40 to 125 °C and supports supply voltages of +-5, +12, +-15 V. Ideal for automotive applications due to its CMOS technology and compact design.
74HC4052DB,118
NXP Semiconductors' 74HC4052DB,118 is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 1V to 5V and offers a max on-state resistance of 195 ohm. Ideal for automotive applications, this small-outline switch has a fast switching time of 69 ns and high off-state isolation of 50 dB.
HD3SS3212RKSR
HD3SS3212RKSR by Texas Instruments is a 20-terminal chip carrier switch with 2 functions, operating at a supply voltage of 3.3V. With a max bandwidth of 8000 kHz, it is ideal for applications requiring high-speed signal switching in commercial temperature environments. The device features low on-state resistance (8 ohm) and common output configuration for efficient performance.
ADG715BRUZ-REEL
ADG715BRUZ-REEL by Analog Devices is an 8-channel SPST multiplexer with a max on-state resistance of 4.5 ohm and 60 dB off-state isolation. It operates at industrial temperature grade, has a supply current of 25 mA, and is ideal for applications requiring precise signal routing in compact spaces.
HEF4066BT,653
HEF4066BT,653 by NXP Semiconductors is a CMOS SPST switch with 4 functions. It operates at -40 to 85°C and has a max on-state resistance of 175 ohm. Widely used in industrial applications for signal routing due to its small outline package and separate output feature.
CD74HC4051M
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG408DYZ-T
7705201EA
Analog Devices' 7705201EA is a MIL-STD-883 compliant CMOS multiplexer with 8 channels, -15V to +15V supplies, and 1000 ohm on-state resistance. Ideal for military applications due to its ceramic package, glass-sealed body, and wide operating temperature range of -55°C to 125°C.
MAX14777GTP+
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
DG409DY+
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG442DY+
Analog Devices' DG442DY+ is a CMOS SPST switch with 4 functions, 16 terminals, and -20V to +20V supply voltage range. With 85 ohm max on-state resistance and 60dB off-state isolation, it's ideal for industrial applications requiring fast switching times of 250ns on and 120ns off.
General Electric Solid State
DG4052EEN-T1-GE4
Vishay Intertechnology's DG4052EEN-T1-GE4 is a CMOS differential multiplexer with 4 channels. It operates b/w -40 to 125 °C and has a max on-state resistance of 106 ohm. Ideal for automotive applications, this chip carrier switch offers a nominal voltage of 5 V and off-state isolation of 49 dB.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BUK6D22-30E
Nexperia
Power Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1;
PSMNR51-25YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Tin (Sn);
PMH260UNE
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
GAN063-650WSA
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
PMEG060T050ELPE
PMEG050T150EIPD
MJD32C
Power Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260;
MJD45H11
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 80 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
LSF0102DC
Level Translators; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); JESD-609 Code: e4;
GAN041-650WSB
Power Field-Effect Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn);
74AUP1G17GX4
BUFFER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
PESD3V3T1BL
74LV1T08GW
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
74HC4053PW
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MJD31CA
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A;
MJD44H11A
The Nexperia MJD44H11A is a NPN BJT transistor with VCEsat of 1V, hFE of 40, and IC of 8A. Ideal for switching applications, it has a max operating temp of 150°C and collector-emitter voltage of 80V. With a package style of small outline and surface mount capability, it offers high performance in power electronics.
NCR321PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
NCR421PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR;
BCP56H
Small Signal Bipolar Transistors; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
BCP53H
Small Signal Bipolar Transistors; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
74LVC1G3157GW,125
NXP Semiconductors' 74LVC1G3157GW,125 is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and offers a max on-state resistance of 38 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and low power consumption.
74LVC1G3157GW-Q100,125
Nexperia's 74LVC1G3157GW-Q100,125 is an AEC-Q100 qualified single-ended multiplexer with 2 channels. It operates b/w -40 to 125 °C and has a max on-state resistance of 195 ohm. With a small outline package style, it is ideal for automotive applications requiring high-speed switching capabilities.
74LVC1G3157GV,125
74LVC1G66GW-Q100,1
NXP Semiconductors' 74LVC1G66GW-Q100,1 is an AEC-Q100 qualified SPST switch with 195 ohm Ron. Operating b/w -40 to 125 °C, it has a dual terminal position and CMOS technology. Ideal for automotive applications due to its small outline package and low power supply requirements of 1.8/5V.
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74LVC1G3157GS,132
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
NXP Semiconductors' 74LVC1G3157GS,132 is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and offers a max on-state resistance of 38 ohm. With a compact chip carrier package style, it is ideal for automotive applications requiring fast switching times and low power consumption.
74LVC1G3157DW-7
Diodes Incorporated
74LVC1G3157DW-7 by Diodes Inc. is a SPDT switch with 6 terminals, operating from -40 to 125°C. It has a small outline package style, matte tin finish, and can handle supply voltages from 1.65V to 5.5V. Ideal for automotive applications due to its compact size and high temperature grade suitability.
74LVC1G3157GW
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74LVC1G3157GW by NXP Semiconductors is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and has a max on-state resistance of 38 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and high off-state isolation levels.
74LVC1G3157GW-Q10H
74LVC1G3157GW-Q10H by NXP Semiconductors is a single-ended multiplexer with 2 channels. It operates at a max temperature of 125°C and has a min operating temperature of -40°C. This CMOS technology switch has a max on-state resistance of 195 ohms and is commonly used in automotive applications.
74LV4051PW,118
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74LVC1G66GW
SPST; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1;
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74LVC1G3157GXZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: NICKEL PALLADIUM GOLD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved