Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: QCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Corohmni
$75.461
Corphita
Parallel I/O Ports NSC810AE-1I attributes and parameters. Explore more Parallel I/O Ports devices from National Semiconductor
CPU Family:
Maximum Clock Frequency:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Organization:
No. of Bits:
No. of I/O Lines:
No. of Ports:
No. of Terminals:
No. of Timers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
NSC810AE-1I Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Daco Semiconductor
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
4554
Jw Miller Magnetics
Other Semiconductors;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
PCA9539PW/Q900,118
NXP Semiconductors
PCA9539PW/Q900,118 by NXP Semiconductors is a parallel I/O port with 16 bits. It has a max supply voltage of 5.5V and operates in automotive temperature grade. This IC is commonly used for general purpose parallel I/O applications.
MAX7310ATE+T
Analog Devices
Analog Devices' MAX7310ATE+T is an 8-bit parallel I/O port with 2.5/5V power supplies, operating from -40 to 125°C. This automotive-grade IC features a square package style, matte tin terminals, and is ideal for general-purpose applications requiring low-profile chip carriers with 8 I/O lines.
NLVPCA9535EMTTXG
NLVPCA9535EMTTXG by Onsemi is a 16-bit parallel I/O port with CMOS technology. It operates b/w -55 to 125 °C and supports a clock frequency of up to 1 MHz. Ideal for military applications, it features a quad terminal position in a compact chip carrier package style.
PCA9538PW
Texas Instruments
PCA9538PW by Texas Instruments is an 8-bit parallel I/O port with a max supply voltage of 5.5V and address bus width of 4. It is used in industrial applications for general purpose peripheral ICs, featuring a small outline package style and dual terminal position.
PCA9554APW
Philips Semiconductors
Parallel IO Ports; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX7311AUG
Freescale Semiconductor
Parallel IO Ports; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
MCP23018T-E/MJVAO
Microchip Technology
MCP23018T-E/MJVAO by Microchip offers 16-bit parallel I/O ports with a max supply voltage of 5.5V and operating temperature range from -40 to 125°C. Ideal for applications requiring general-purpose peripheral ICs, it features a package style of chip carrier with very thin profile and terminal pitch of 0.5mm.
ADP5587ACPZ-1-R7
Analog Devices' ADP5587ACPZ-1-R7 is an 18-bit Parallel I/O Port IC with a supply voltage range of 1.65V to 3.6V, ideal for industrial applications. This CMOS technology-based chip carrier package features 2 ports and quad terminals, operating b/w -40°C to 85°C with a very thin profile design at 0.8mm seated height.
MD82C55A/B
Renesas Electronics
Renesas Electronics' MD82C55A/B is a CMOS technology-based Parallel I/O Port IC with 24 I/O lines. It operates b/w -55 to 125 °C and supports 3 ports, making it ideal for military-grade applications requiring general-purpose parallel I/O functionality.
FXL6408UMX
FXL6408UMX by Onsemi is a CMOS technology-based Parallel I/O Port with 8 I/O lines. It operates b/w -40 to 85°C, with supply voltage ranging from 1.65V to 3.6V. This chip carrier with very thin profile is ideal for industrial applications requiring general-purpose parallel I/O ports.
D8255A
Advanced Micro Devices
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
PCF8575TSDB
PCF8575TSDB by NXP Semiconductors is a 16-bit parallel I/O port with supply voltage range of 2.5-5.5V, operating temperature from -40 to 85°C. It features small outline package style for industrial applications requiring general purpose parallel I/O functionality.
PCAL9535AHF,128
NXP Semiconductors' PCAL9535AHF,128 is a 16-bit parallel I/O port IC with 1.8/5V power supplies and CMOS technology. It comes in a square chip carrier package suitable for industrial applications, offering -40 to 85°C operating temperature range. Ideal for general purpose parallel I/O tasks requiring surface mount installation with 24 terminals at 0.5mm pitch.
PCF8575CDBRG4
PCF8575CDBRG4 by Texas Instruments is a 16-bit parallel I/O port with 2 ports, operating at 5V. It features CMOS technology, industrial temperature grade, and GULL WING terminal form. Ideal for general purpose applications requiring precise control over multiple input/output lines in compact designs.
TCA6416AZQSR
TCA6416AZQSR by Texas Instruments is a 16-bit parallel I/O port with 2 ports, operating at a max frequency of 0.4 MHz. It has a supply voltage range of 1.65V to 5.5V and can withstand industrial temperatures from -40°C to 85°C. Ideal for applications requiring general-purpose parallel I/O interfacing in compact spaces due to its very thin profile and fine pitch package style.
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX7324AEG-T
Maxim Integrated
MAX7324AEG-T by Maxim Integrated is a Parallel I/O Port IC with 24 terminals, operating at 1.71-5.5V. It has a small outline package and is suitable for automotive applications due to its wide temperature range of -40 to 125°C. This BICMOS technology-based device offers general-purpose parallel I/O functionality in a compact form factor.
PCA9554ADGV
PCA9554ADGV by Texas Instruments is an 8-bit parallel I/O port with a max supply voltage of 5.5V and operating temperature range from -40 to 85°C. It features a small outline package style, suitable for industrial applications requiring general-purpose parallel I/O functionality at a clock frequency of up to 0.4MHz.
MAX7313AEG+
PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
PCA6416AEVJ
PCA6416AEVJ by NXP Semiconductors is a 16-bit Parallel I/O Port with 1.8/5 V power supplies, operating from -40 to 85°C. It features a grid array package style, suitable for industrial applications requiring general-purpose parallel I/O functionality in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved