Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Parana Technologies
$6.646
$7.360
DigiPath Technology Company
$7.318
$6.732
AZTECH Wire
$7.446
ChromeModa Solutions
$7.467
$6.123
IDEA Electronic Components Group
$6.720
One Stop Electronics
$580.000
Corphita
Cellphone ICs LP3939ILQX attributes and parameters. Explore more Cellphone ICs devices from National Semiconductor
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LP3939ILQX Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Diotec Semiconductor Ag
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Zowie Technology
CC1110F8RSP
CC1110F8RSP by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. It operates at temperatures ranging from -40 to 85°C, making it suitable for industrial applications. This RF and baseband circuit has a nominal voltage of 3V and terminal pitch of 0.5mm, ideal for telecom devices.
SI4721-B20-GMR
Silicon Labs
Silicon Labs' SI4721-B20-GMR is a cellphone IC with 20 terminals in a square chip carrier package. Operating b/w -20°C to 85°C, it features RF and baseband circuits for telecom applications. With a nominal voltage of 3.3V, this IC has a compact size of 3x3mm suitable for surface mount designs.
BG95M1LA-64-SGNS
Quectel Wireless Solutions
Quectel Wireless Solutions' BG95M1LA-64-SGNS, a CELL IC with 102 terminals in MICROELECTRONIC ASSEMBLY, operates b/w -35°C to 75°C. This RF and BASEBAND CIRCUIT has a nominal voltage of 3.3V, ideal for compact cellphone designs due to its small dimensions of 19.9mm width and 23.6mm length.
AD6659BCPZ-80
Analog Devices
AD6659BCPZ-80 by Analog Devices is a cellphone IC with 2 functions, operating at 1.8V. It features a square package style with 64 terminals and matte tin finish. Ideal for RF and baseband circuits in telecom applications, it has an industrial temperature grade of -40 to 85 °C.
NRF9160-SIAA-B1A-R
Nordic Semiconductor Asa
Nordic Semiconductor's NRF9160-SIAA-B1A-R is a Cellphone IC with RF and Baseband Circuit for telecom. It operates in industrial temperature range (-40 to 85°C) with 3.8V supply voltage. The package is rectangular, surface mountable, grid array style, measuring 10.5mm x 16mm with 127 terminals at 0.5mm pitch suitable for various wireless applications.
CC2510F32RSPG3
CC2510F32RSPG3 by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 2.5/3.3V and peak reflow temperature of 260°C. Ideal for RF and baseband circuits in industrial telecom applications due to its CMOS technology and compact size (6x6mm).
LARA-R211-02B
U-blox Ag
LARA-R211-02B by U-blox Ag is a Cellphone IC with TS 16949 screening. It features RF and baseband circuit, operates at -20 to 65 °C, and requires 3.8V supply voltage. This rectangular GRID ARRAY package is ideal for mobile communication applications.
HMC687LP4E
Analog Devices' HMC687LP4E is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial telecom applications. With matte tin finish and no-lead terminal form, it supports RF and baseband circuits at 5V nominal voltage.
LLCC68IMLTRT
Semtech
Semtech's LLCC68IMLTRT is a cellphone IC with 24 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, with matte tin finish and 3.3V supply voltage. Ideal for RF and baseband circuits in telecom applications due to its compact size (4x4mm) and quad terminal position.
HMC785LP4ETR
Analog Devices' HMC785LP4ETR is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
NRF9160-SICA-B1A-R7
Nordic Semiconductor's NRF9160-SICA-B1A-R7 is a surface-mount Cellphone IC with 127 terminals in a rectangular grid array package. It operates b/w -40°C to 85°C, suitable for industrial applications. This RF and baseband circuit has a nominal voltage of 3.8V, making it ideal for telecom devices.
HMC830LP6GETR
Analog Devices' HMC830LP6GETR is a 40-terminal cellphone IC in a square chip carrier package with matte tin finish. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features RF and baseband circuits, nominal voltage of 3.3V, and terminal pitch of 0.5mm for telecom applications.
AT86RF233-ZUR
Atmel
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
TCM320AC56IDW
TCM320AC56IDW by Texas Instruments is a Cellphone IC with 20 terminals, operating at 5V. It features a companding law of MU-LAW and a linear coding of 13-BIT. Ideal for telecom applications due to its BASEBAND CIRCUIT type and compact SMALL OUTLINE package style.
CC1100-RTY1
CC1100-RTY1 by Texas Instruments is a cellphone IC with 20 terminals, operating at -40 to 85°C. It features a supply voltage of 3V, CMOS technology, and RF/baseband circuitry. This surface-mount chip carrier has a square shape, matte tin finish, and very thin profile for industrial applications.
AD6672BCPZ-250
AD6672BCPZ-250 by Analog Devices is a cellphone IC with 32 terminals, operating at -40 to 85°C. It features a 1.8V supply voltage, RF and baseband circuitry, and matte tin finish. This square chip carrier is surface mountable, with a terminal pitch of 0.5mm, making it ideal for industrial telecom applications.
SARA-U201-03B-00
SARA-U201-03B-00 by U-blox Ag is a CELLPHONE IC with 96 terminals, RECTANGULAR package shape, and 3.25mm seated height. Ideal for TELECOM CIRCUITS, it operates b/w -20 to 65°C with a supply voltage of 3.8V, making it suitable for commercial applications.
BGA713N7E6327XTSA1
Infineon Technologies
BGA713N7E6327XTSA1 by Infineon Technologies is a cellphone IC with 6 terminals in a small outline package. It operates b/w -30°C to 85°C, suitable for RF and baseband circuits. With a nominal voltage of 2.8V, it features tin terminal finish and measures 1.3mm in width and 2mm in length.
NRF9160-SIAA-B1A-R7
Nordic Semiconductor's NRF9160-SIAA-B1A-R7 is a cellular IC with RF and baseband circuit, operating at -40 to 85°C. It features a grid array package style, 127 terminals, and 3.8V supply voltage. Ideal for telecom applications requiring compact design and industrial temperature range.
TLV320AC57IDW
TLV320AC57IDW by Texas Instruments is a 20-terminal IC with 3V supply voltage, operating b/w -40 to 85°C. It features A-LAW companding law, 13-bit linear coding, and includes a filter. Ideal for cellphone applications due to its small outline package style and telecom baseband circuit type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved