Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
$14.130
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$12.640
10k+ parts
$11.900
Digiode
$14.906
Freelance Electronics
$15.158
Digital Electronic Gebert Verwaltungs UG
Anansix
Nova Conductors
MRC Electronics
Holdelec - ElecDif-Pro
Prism Electronics
R&J Components
Electronics Depot
Euro-Tech
J & M Industries LLC
ECAB
Vyrian
Corohmni
$1.720
Parana Technologies
$2.058
$2.580
DigiPath Technology Company
$2.266
ChromeModa Solutions
$2.312
$1.896
IDEA Electronic Components Group
$2.081
AZTECH Wire
$12.768
Ampacity Inc.
$13.340
Semicontronic
$13.006
$12.940
Corphita
$14.121
Advanced Electronics
$17.535
$17.359
$16.658
Alle Elektronik GmbH
Lixinc
Kepictronics
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Speed Components Ltd (Excess)
Motion Control ICs LM629N-6 attributes and parameters. Explore more Motion Control ICs devices from National Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM629N-6 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
STMicroelectronics
Bkc Semiconductors
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Jinan Jingheng Electronics
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
L6205PD013TR
STMicroelectronics L6205PD013TR is a Motion Control IC with 48V Vsup, 5.6A output current, and BCDMOS technology. Ideal for automotive applications due to its -40 to 150 °C operating temperature range and small outline package style. It features dual terminals in a rectangular shape suitable for stepper motor control.
A3959SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3959SLPTR-T is a Motion Control IC with 28 terminals, operating voltage of 5V, and max output current of 6A. Ideal for stepper motor control applications due to its small outline package and NMOS technology. Operating temperature ranges from -20°C to 85°C.
L6474PD
L6474PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating at 3.3V supply voltage and supporting up to 7A output current. It is a Stepper Motor Controller in a small outline package suitable for surface mount applications. The IC features NMOS technology, Gull Wing terminal form, and has a max supply voltage of 45V.
FSB50250US
FSB50250US by Onsemi is a Motion Control IC with 23 terminals, operating at 13.5-16.5V. It offers a max output current of 2.8A and peak reflow temperature of 260°C, suitable for AC motor control applications in compact microelectronic assemblies.
FSBB30CH60C
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
PDRV8304HRHAR
BRUSHLESS DC MOTOR CONTROLLER;
TC646BEOA
Microchip Technology
Microchip TC646BEOA is a Motion Control IC with 8 terminals, operating voltage of 3-5V, and temp range -40 to 85°C. Ideal for Brushless DC Motor control applications due to its small outline package and industrial temperature grade suitability. Features include dual terminal position, matte tin finish, and low supply current of 0.4mA.
DRV8834PWPR
DRV8834PWPR by Texas Instruments is a Motion Control IC with 24 terminals and a supply voltage range of 2.5-10.8V. It features a max output current of 2.2A, ideal for brush DC motor control applications in industrial settings with operating temperatures ranging from -40 to 85°C.
DRV8312DDW
Texas Instruments DRV8312DDW is a Motion Control IC with 44 terminals, operating voltage of 12-50V. It features a max output current of 6.5A and operates in industrial temperature range (-40 to 85°C). Ideal for brush DC motor control applications due to its compact size and high supply voltage tolerance.
DRV8424PWPR
DRV8424PWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating temperature range of -40 to 125°C, and max output current of 2.5A. It is a Stepper Motor Controller suitable for automotive applications due to its compact size (9.7mm x 4.4mm) and dual terminal position design, making it ideal for precise motion control in tight spaces.
TMC2160A-TA
Trinamic Motion Control & Kg
TMC2160A-TA by Trinamic is a Motion Control IC with 48 terminals, operating voltage range of 10-50V, and temp. range of -40 to 125°C. Ideal for automotive applications, this stepper motor controller features a flatpack package style and matte tin terminal finish.
DRV8814PWPR
DRV8814PWPR by Texas Instruments is a Motion Control IC with Vsup ranging from 8V to 45V. It features a small outline package, dual terminal position, and industrial temperature grade suitable for brush DC motor control applications. With a max operating temperature of 85°C and compact dimensions of 9.7mm x 4.4mm x 1.2mm, it offers efficient power management in various industrial settings.
DRV8701PRGER
DRV8701PRGER by Texas Instruments is a Motion Control IC with 24 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 5.9-45V and peak current of 9.5mA, it's ideal for stepper motor control systems.
DRV8703QRHBTQ1
DRV8703QRHBTQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 5.5V to 45V, and temperature grade suitable for automotive applications. It features a max operating temperature of 125°C, package style in chip carrier with very thin profile, and terminal finish in Nickel/Palladium/Gold. Ideal for stepper motor control systems requiring precise motion control in harsh environments.
A5976GLPTR-T
Allegro MicroSystems' A5976GLPTR-T is a Motion Control IC with 28 terminals, operating temperature range of -40 to 105°C. It is a Stepper Motor Controller with max output current of 2.8A, suitable for industrial applications requiring precise motion control in compact spaces.
L6206PD
STMicroelectronics L6206PD is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package suitable for automotive applications, with max output current of 5.6A and temp range -40 to 150°C.
FSB50550BL
FSB50550BL by Onsemi is a Motion Control IC with 23 terminals, operating b/w -40 to 125°C. It features a max output current of 7A and supports brushless DC motor control applications. With a package style of MICROELECTRONIC ASSEMBLY, it is designed for automotive use with a nominal voltage range of 13.5V to 16.5V.
BD6222HFP-TR
ROHM
ROHM's BD6222HFP-TR is a Motion Control IC with 1 function, suitable for BRUSH DC MOTOR CONTROL. Operating at -40 to 85°C, it has a supply voltage range of 6-15V and can handle up to 2A output current. With a compact design (9.395mm x 8mm x 2.005mm), it's ideal for industrial applications requiring precise motor control in tight spaces.
L6470H
L6470H by STMicroelectronics is a Motion Control IC with 28 terminals, operating at supply voltages of 3.3/5V and up to 45V. It features a max output current of 7A, suitable for stepper motor control applications. The package style is small outline with a heat sink, making it ideal for compact designs requiring precise motion control.
PDRV8847SPWR
STEPPER MOTOR CONTROLLER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM629M-8/NOPB
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
National Semiconductor
LM629M-6/NOPB
LM629M-6/NOPB by Texas Instruments is a Motion Control IC with 24 terminals, operating at 5V. It features a small outline package style and supports brush DC motor control applications. With a temperature range of -40 to 85°C, it is ideal for industrial use.
LM628N-6/NOPB
LM628N-6/NOPB by Texas Instruments is a motion control IC with a supply voltage of 5V. It has 1 function and comes in a rectangular package shape. This IC is commonly used as a brush DC motor controller in industrial applications.
LM629M-6
LM629N-6/NOPB
LM628N-8/NOPB
LM628N-6
LM629N-6
LM628N-8
LM629MX-8
LM629MX-8 by Texas Instruments is a Motion Control IC with 24 terminals, operating at 5V. It features a small outline package style and supports brush DC motor control applications. With a temperature range of -40 to 85°C, it is ideal for industrial use.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved