Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Median Price
$1.273
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.938
100+ parts
-
1k+ parts
10k+ parts
Texas Instruments
$1.186
$0.912
$0.480
Chip1Stop
$1.360
$0.867
Mouser Electronics
$1.540
$0.904
$0.789
$0.740
DigiKey
$0.903
$0.816
Rochester
$0.815
$0.676
$0.603
Verical
Digiode
$0.634
TME
$1.250
$0.990
Component Electronics Inc.
$3.080
$2.310
$2.000
Vyrian
Chip Stock
Anansix
Classic Components Corporation
Bristol Electronics
EMSNET
ComSIT Distribution GmbH
Nova Conductors
Martec Srl
Ampacity Inc.
$0.570
Corphita
$0.600
Component Stockers USA
$0.950
$0.510
Corohmni
$1.002
Parana Technologies
$2.477
$2.969
DigiPath Technology Company
$2.727
ChromeModa Solutions
$2.783
$2.282
IDEA Electronic Components Group
$2.505
Perfect Parts
Authorized Procurement Solutions
A-Z Elektronik GmbH
Continental Prestige Electronics
Argo Parts USA
Alle Elektronik GmbH
Lixinc
iodParts Technologies Inc.
GreenTree Electronics
Aranea Global
Kepictronics
Audio & Video Amplifiers LM4889MM/NOPB attributes and parameters. Explore more Audio & Video Amplifiers devices from National Semiconductor
Nominal Bandwidth:
General IC Type:
Harmonic Distortion:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM4889MM/NOPB General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - VSSOP Pkg Copper Wire 07/Jun/2013
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
ROHM
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Philips Components
EU2B-YS3203C
Idec
ROTARY SWITCH;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
TDA1553Q
Philips Semiconductors
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 13; Package Code: ZIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
MAX9719DEBE+T
MAX9719DEBE+T by Maxim Integrated is a 2-channel audio amplifier with 1.4W output power and 6dB gain. Operating at -40 to 85°C, it has a supply voltage range of 2.7-5.5V, making it ideal for industrial applications requiring high-quality audio amplification in a compact grid array package.
MAX4466EXK-T
MAX4466EXK-T by Maxim Integrated is an audio preamplifier with a small outline, thin profile package. It has a nominal bandwidth of 0.6 kHz and low harmonic distortion of 0.02%. This IC is commonly used in audio and video amplifiers for applications requiring high-quality sound amplification.
LM6172IMX
LM6172IMX by Texas Instruments is a video amplifier IC with 2 channels, operating temperature range of -40 to 85°C. It has a nominal bandwidth of 130 kHz and can operate on supply voltages ranging from 5.5V to 36V. This small outline package with gull wing terminals is ideal for audio and video amplification applications.
MAX4466EUK+
Analog Devices
MAX4466EUK+ by Analog Devices is an audio preamplifier with 0.03% harmonic distortion. It operates b/w -40 to 85°C, with a supply voltage range of 2.4-5.5V. Ideal for audio and video amplification applications due to its small outline package and low profile design.
TPA3223DDVR
TPA3223DDVR by Texas Instruments is a Class D audio amplifier with 200W output power, 36dB gain, and 2 channels. It operates b/w -40 to 85°C, has a small outline package style, and is suitable for audio and video amplification applications.
NTE824
Nte Electronics
NTE824 by Nte Electronics is an audio preamplifier with 0.5% harmonic distortion, operating at 0-70°C. It has 8 terminals, a package style of IN-LINE, and a nominal bandwidth of 0.075 kHz. Ideal for audio and video amplification applications requiring a supply voltage of 14V.
IR4302MTRPBF
International Rectifier
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: QCCN; Package Shape: SQUARE;
MAX9814ETD+
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: SQUARE;
LM4864MX/NOPB
LM4864MX/NOPB by Texas Instruments is an audio amplifier IC with 1% harmonic distortion, 0.85W output power, and 6mA max supply current. It is used in industrial applications for audio amplification in a small outline package with surface mount capability.
TDA1562Q/N3/S10C,1
TDA1562Q/N3/S10C,1 by NXP Semiconductors is an audio amplifier IC with 70W output power and 10% harmonic distortion. It has a gain of 26 dB, operates b/w -40°C to +125°C, and requires a supply voltage of 8-18V. Ideal for audio applications requiring high power output in a compact package.
LM386N-1
LM386N-1 by Texas Instruments is an audio amplifier IC with 46 dB gain, 0.3 kHz bandwidth, and 10% harmonic distortion. It operates b/w 4-12V, suitable for low-power audio applications in commercial temperature environments. The through-hole package style with 8 terminals makes it easy to integrate into various audio and video amplifier circuits.
TDA7052A
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM6172IM
LM6172IM by Texas Instruments is a dual-channel video amplifier with a nominal bandwidth of 130 kHz. It operates b/w -40 to 85°C, suitable for industrial applications. With a small outline package style and surface-mount capability, it offers high performance in audio and video amplification tasks.
TDA7492MV13TR
TDA7492MV13TR by STMicroelectronics is a class D audio amplifier with a power output of 50W. It operates at temperatures ranging from 0 to 70°C and has a max supply voltage of 26V. This amplifier is commonly used in audio and video applications.
LM4819MMX/NOPB
National Semiconductor
THS4021CDGNRG4
THS4021CDGNRG4 by Texas Instruments is a video amplifier with 8 terminals, operating temperature range of 0-70°C, and gain of 10 dB. It is ideal for audio/video applications requiring a small outline package, with a bandwidth of 350 kHz and supply voltage range from 4.5V to 16V.
SSM2166P
Analog Devices' SSM2166P is an audio preamplifier with 20dB gain, operating at 4.5-5.5V. It has a bandwidth of 0.02 kHz and can draw up to 10mA current. Ideal for industrial applications requiring precise audio amplification in a compact IN-LINE package.
EL2099CT
Intersil
VIDEO AMPLIFIER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO;
AD8021ARM-REEL7
AD8021ARM-REEL7 by Analog Devices is a video amplifier with 8 terminals, operating temperature range of -40 to 85°C, and nominal bandwidth of 560 kHz. It is a small outline IC suitable for audio/video applications requiring a supply voltage b/w 2.25V to 12V in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM4861MX/NOPB
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM4871MX/NOPB
LM4871MX/NOPB by Texas Instruments is an audio amplifier IC with 3W output power, 10% harmonic distortion, and 5V supply voltage. It is used in industrial applications requiring small outline package style for audio amplification.
LM4871MMX/NOPB
LM4871MMX/NOPB by Texas Instruments is a small outline, thin profile audio amplifier with a power supply of 5V. It has a nominal output power of 3W and operates in an industrial temperature range (-40 to 85°C). This amplifier is suitable for applications requiring high-quality audio amplification in compact devices.
LM4861MX
LM4871MM/NOPB
LM4880M
LM4861M/NOPB
LM4861M/NOPB by Texas Instruments is an audio amplifier IC with 1.6W output power and 26dB gain. It operates b/w -40 to 85°C, suitable for industrial applications. This CMOS technology device has a small outline package with surface mount capability, making it ideal for compact audio systems.
LM4871M/NOPB
LM4871MX
LM4861M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved