Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' SSM2305RMZ-REEL7 is a Class D audio amplifier with 10% harmonic distortion, 2.8W output power, and 18dB gain. It operates b/w -40 to 85°C, suitable for industrial applications requiring small outline amplifiers with a supply voltage range of 2.5V to 5.5V.
Median Price
$2.120
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.280
1k+ parts
$1.110
10k+ parts
$1.050
Newark
$1.120
-
Farnell
$2.990
$1.490
$1.020
Analog Devices Inc
$3.010
$1.297
$0.956
$0.875
DigiKey
$1.123
$1.052
Element14
$2.050
$1.640
Rochester
$1.290
$1.070
$0.955
Digiode
$0.923
Bristol Electronics
$2.250
$1.395
$0.743
Chip Stock
Vyrian
Rebound Electronics
LIBRA Elektronik GmbH
M&R Communications
Nova Conductors
Cyclops Electronics Ltd
Parana Technologies
$0.763
$0.709
IDEA Electronic Components Group
$0.820
$0.779
Ampacity Inc.
$0.830
Semicontronic
$0.809
$0.805
Corphita
Corohmni
$0.953
DigiPath Technology Company
$1.279
$1.228
Aztec Data Supply Inc.
$2.584
A-Z Elektronik GmbH
Kepictronics
Lixinc
Futuretech Components
Aranea Global
Continental Prestige Electronics
$1.320
$0.904
Argo Parts USA
Cyclops Electronics Ltd (Excess)
This material provides durability and resistance to damage, ensuring a longer lifespan for the product.
Class D amplifiers are known for their high efficiency and low heat dissipation, making them ideal for audio applications.
The amplifier offers a decent output power for small to medium-sized audio applications.
The amplifier has a wide nominal bandwidth, allowing for accurate and clear audio reproduction across different frequencies.
With low harmonic distortion, the audio output will be clean and free from unwanted noise or distortion.
This high peak reflow temperature ensures the product can withstand manufacturing processes without damage.
The low minimum supply voltage makes this amplifier suitable for battery-powered applications or low voltage systems.
The amplifier has a high gain, allowing for amplification of weak audio signals without introducing noise or distortion.
Audio & Video Amplifiers SSM2305RMZ-REEL7 attributes and parameters. Explore more Audio & Video Amplifiers devices from Analog Devices
Nominal Bandwidth:
General IC Type:
Gain:
Harmonic Distortion:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SSM2305RMZ-REEL7 General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Assembly/Origin - 8/10L MSOP Products Assembly Transf 26/Oct/2015
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Fairchild Semiconductor
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Pro-an Electronic
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM4890MMX/NOPB
LM4890MMX/NOPB by Texas Instruments is an audio amplifier IC with 2% harmonic distortion, 1.2W output power, and 93dB noise figure. It operates b/w -40 to 85°C and requires a supply voltage of 2.2-5.5V. Ideal for industrial applications requiring compact audio amplification in a small outline package.
TDA2003V
STMicroelectronics
TDA2003V by STMicroelectronics is a 10W audio amplifier with 10% harmonic distortion, ideal for audio applications. Operating at 8-18V, it offers a gain of 40dB and nominal bandwidth of 0.022 kHz. With a compact rectangular package style and through-hole terminal form, it's suitable for various audio and video amplification projects.
TDF8546TH/N2,118
NXP Semiconductors TDF8546TH/N2,118 is an audio amplifier IC with 36 terminals. Operating temperature range from -40 to 105°C. It has a power supply of 14.4V and max supply current of 350mA. Ideal for industrial audio and video applications due to its high performance and compact design.
LM4670SDX/NOPB
National Semiconductor
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
TAS5760MTDAPRQ1
TAS5760MTDAPRQ1 by Texas Instruments is an audio amplifier IC with 25W output power, suitable for industrial applications. It features a small outline package with 32 terminals and operates b/w -40 to 105°C temperature range. The IC supports dual-channel configuration and has a max supply voltage of 26.4V, making it ideal for automotive audio systems.
AD817ARZ-REEL
AD817ARZ-REEL by Analog Devices is a video amplifier IC with 8 terminals, operating temperature range of -40 to 85°C, and supply voltage from 2.5V to 18V. It is used in audio/video applications due to its small outline package style and industrial temperature grade suitability.
LM2876TF/NOPB
AUDIO AMPLIFIER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Code: ZIP; Package Shape: RECTANGULAR;
TS4990IQT
STMicroelectronics' TS4990IQT is a square-shaped audio amplifier IC with 1.2W output power, 1% harmonic distortion, and operates b/w -40 to 85°C. It has a small outline package style, matte tin finish, and dual terminal position suitable for industrial applications requiring high-quality audio amplification in compact devices.
LM4861MX
LM4861MX by Texas Instruments is an audio amplifier with 1.6W output power and 26dB gain. It operates b/w -40 to 85°C, ideal for industrial applications. With a small outline package style and surface mount capability, it offers low harmonic distortion at 1%.
MAX98374EFF+T
Maxim Integrated
CLASS D AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 22; Package Code: HVQCCN; Package Shape: SQUARE;
LME49811TB/NOPB
LME49811TB/NOPB by Texas Instruments is an audio amplifier IC with +-50/+-100V power supplies, 15 terminals, and 24mA max supply current. It operates b/w -20°C to 75°C, suitable for commercial extended temperature grade applications. The rectangular package style with flange mount makes it ideal for audio and video amplification needs.
MAX98307ETE+T
CLASS DG AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LM1875T/NOPB
Texas Instruments' LM1875T/NOPB is a 20W audio amplifier IC with 2 channels. It offers low harmonic distortion at 1%, operating b/w 0-70°C. Ideal for audio applications, it features a rectangular package style and bipolar technology for high-quality sound output.
LM4861M
LM4861M by Texas Instruments is an audio amplifier with 1.6W output power and 26dB gain. It operates in industrial temperature range (-40 to 85°C) and has low harmonic distortion (1%). Ideal for compact audio applications due to its small outline package style and surface mount capability.
SI8244BB-D-IS1
Silicon Labs
CLASS D AUDIO AMPLIFIER; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2A; Peak Reflow Temperature (C): 260;
MAX9814ETD+T
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: SQUARE;
TDA7498ETR
TDA7498ETR by STMicroelectronics is a Class D audio amplifier with 160W output power, 10% harmonic distortion, and 35.8dB gain. It is ideal for audio and video applications requiring high-quality amplification in a small outline package with surface mount capabilities.
MAX9700DEUB
MAX9700DEUB by Maxim Integrated is a small outline, thin profile audio amplifier with a power supply range of 2.5V to 5.5V. It has a nominal output power of 1.6W and a gain of 20dB. This industrial-grade amplifier is suitable for applications requiring high-quality audio amplification in limited space environments.
MAX98307ETE+
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
SSM2166SZ
SSM2166SZ by Analog Devices is a surface mount audio preamplifier with a gain of 20 dB. It operates at a min supply voltage of 4.5 V and has a max operating temperature of 85°C. This IC is commonly used in audio and video amplifiers for industrial applications.
SSM2518CBZ-R7
Analog Devices' SSM2518CBZ-R7 is a Class D audio amplifier with 2.5W output power, 10% harmonic distortion, and operates b/w -40 to 85°C. Ideal for audio applications, it features a compact grid array package with very thin profile and fine pitch terminals for surface mount assembly.
SSM2166SZ-REEL7
Analog Devices' SSM2166SZ-REEL7 is an audio preamplifier with 20dB gain, operating at 5V. It features a small outline package, industrial temperature grade, and bipolar technology. Ideal for applications requiring amplification in audio systems or video equipment.
SSM2166SZ-REEL
Analog Devices' SSM2166SZ-REEL is an audio preamplifier with 20dB gain, operating at 5V. It features a small outline package, industrial temperature grade, and bipolar technology. Ideal for audio applications requiring amplification in a compact form factor.
SSM2211SZ-REEL
Analog Devices' SSM2211SZ-REEL is a Class D audio amplifier with 0.2% harmonic distortion, operating at temperatures from -40 to 85°C. With a nominal output power of 1.5W and a small outline package style, it's ideal for industrial audio applications requiring high-quality sound amplification in compact spaces.
SSM2211SZ
Analog Devices' SSM2211SZ is a Class D audio amplifier with 0.2% harmonic distortion, ideal for industrial applications. Operating b/w -40 to 85°C, it offers 1.5W output power at 2.7-5V supplies in a small outline package with surface mount capability.
SSM2167-1RMZ-R7
AUDIO PREAMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
SSM2167-1RMZ-REEL
SSM2211SZ-REEL7
CLASS D AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SSM2518CPZ-RL
CLASS D AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SSM2518CPZ
SSM2167-1RMZ-R2
SSM2167-1RMZ-R2 by Analog Devices is a CMOS audio preamplifier with a gain of 18 dB. It operates on power supplies ranging from 2.5V to 5.5V and has a nominal bandwidth of 0.02 kHz. This small outline, thin profile amplifier is commonly used in audio and video applications for its compact size and high performance capabilities.
SSM2305RMZ-R2
CLASS D AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
SSM2166S-REEL
AUDIO PREAMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SSM2166S-REEL7
SSM2166S
SSM2518CPZ-R7
SSM2518CPZ-R7 by Analog Devices is a surface mount Class D audio amplifier with 2.5W nominal output power. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3.6V. This amplifier is commonly used in audio and video applications requiring high-quality sound amplification.
SSM2167-1RM-REEL
SSM2167-1RM-R2
SSM2019BRNZRL
SSM2019BRNZRL by Analog Devices is a Class AB audio amplifier with +-15V power supplies. It features 8 terminals, operates b/w -40 to 85 °C, and has a small outline package style. Ideal for industrial applications requiring bipolar technology and a min supply voltage of 5V.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved