Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.963
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Arrow
1+ parts
$0.840
100+ parts
$0.684
1k+ parts
-
10k+ parts
Texas Instruments
$1.008
$0.775
$0.408
Chip1Stop
$1.234
$0.717
$0.538
Mouser Electronics
$1.380
$0.808
$0.701
$0.664
DigiKey
$0.680
Adafruit Industries
RS (Exports)
$0.679
Verical
Ozdisan Elektronik
$0.562
Nova Conductors
$0.764
Digiode
$0.958
TME
$1.260
$0.731
$0.672
$0.632
Maritex
$1.730
$0.866
$0.694
Vyrian
Chip Stock
Anansix
NAC Semi
$1.660
$1.530
Sensible Micro Corp
Classic Components Corporation
Component Sense
Micros sp.j. W. Kędra i J. Lic
$0.887
$0.635
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
LWI Electronics Inc
Micros
$0.843
$0.822
North Shore Components
Bristol Electronics
Atlantic Semiconductor
Semicontronic
$0.520
$0.507
$0.504
Ampacity Inc.
Argo Parts USA
$0.750
Netroflash
$0.726
$0.711
Corphita
$0.907
Component Stockers USA
$1.200
$0.590
$0.550
Parana Technologies
$3.061
$3.576
ChromeModa Solutions
$3.439
$2.820
IDEA Electronic Components Group
$3.095
Corohmni
$3.685
Advanced Electronics
$4.099
$3.894
Perfect Parts
GreenTree Electronics
Lixinc
A-Z Elektronik GmbH
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Alle Elektronik GmbH
Metaverse IC Inc.
Futuretech Components
S.R.D Solutions
DigiPath Technology Company
$3.101
iodParts Technologies Inc.
Kepictronics
Continental Prestige Electronics
$0.886
$0.596
Audio & Video Amplifiers LM4861MX/NOPB attributes and parameters. Explore more Audio & Video Amplifiers devices from National Semiconductor
Nominal Bandwidth:
General IC Type:
Gain:
Harmonic Distortion:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM4861MX/NOPB General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
TDA1521
Philips Semiconductors
AUDIO AMPLIFIER; No. of Terminals: 9; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: SIP9,.1; Terminal Pitch: 2.54 mm; JESD-609 Code: e0;
MAX5486EUG+
Analog Devices
Analog Devices' MAX5486EUG+ is a BICMOS audio amplifier IC with 2 channels, operating at -40 to 85°C. It has a power supply range of 2.7-5.5V and consumes max 1.4mA current. Ideal for audio applications requiring small outline, thin profile packages in industrial settings.
SI8244BB-D-IS1
Silicon Labs
CLASS D AUDIO AMPLIFIER; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2A; Peak Reflow Temperature (C): 260;
IRS2093MTRPBF
IRS2093MTRPBF by Infineon is a Class D audio amplifier with 4 channels, operating at -40 to 125°C. It has a nominal bandwidth of 0.022 kHz and supports power supplies of 10-15V. Ideal for automotive applications due to its compact square package style and surface mount capability.
FDA801B-VYY
STMicroelectronics' FDA801B-VYY is a Class D audio amplifier with 4 channels, suitable for audio and video applications. It features a low profile flatpack package with gull wing terminals, measuring 10mm in width and length. Operating at a min supply voltage of 6V, it offers high-quality sound amplification in a compact form factor.
LM4670SDX/NOPB
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
MAX9719CEBE+T
MAX9719CEBE+T by Maxim Integrated is a 2-channel audio amplifier with 1.4W output power, suitable for industrial applications. It operates at -40 to 85°C, with a supply voltage range of 2.7-5.5V and gain of 3dB. This surface-mount IC in a grid array package offers fine-pitch terminals for compact designs.
FHP3230IMU8X
Rochester Electronics
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: SQUARE;
THS4021CDGNRG4
THS4021CDGNRG4 by Texas Instruments is a video amplifier with 8 terminals, operating temperature range of 0-70°C, and gain of 10 dB. It is ideal for audio/video applications requiring a small outline package, with a bandwidth of 350 kHz and supply voltage range from 4.5V to 16V.
BA3308F-E2
ROHM
ROHM's BA3308F-E2 is an audio preamplifier IC with 2 channels, 80 dB gain, and 0.1% harmonic distortion. Operating b/w -25 to 75°C, it requires a supply voltage of 4.5-14V and draws a max current of 4.5 mA. Ideal for small outline applications in audio and video amplifiers.
MC34119D
Motorola
MC34119D by Motorola is an audio amplifier with 10% harmonic distortion, 0.4W output power, and 0dB gain. It operates b/w -20 to 70°C and has a max supply voltage of 16V. Ideal for small outline applications requiring low power audio amplification in commercial temperature environments.
TDA8541T/N1/02,118
TDA8541T/N1/02,118 by NXP Semiconductors is an audio amplifier IC with 8 terminals and 1.2W output power. It operates b/w -40 to 85°C, has a gain of 20dB, and low harmonic distortion at 10%. This small outline package is ideal for industrial applications requiring high-quality audio amplification in a compact form factor.
TDA7491HV13TR
TDA7491HV13TR by STMicroelectronics is a Class D audio amplifier with 20W output power, 10% harmonic distortion, and 32dB gain. It operates b/w 0-70°C and requires a supply voltage of 5-18V. Ideal for audio applications requiring high efficiency amplification in a compact package.
OPA362AIDCKT
OPA362AIDCKT by Texas Instruments is a video amplifier with 1 channel and a max supply voltage of 3.3V. It is used in automotive applications and operates at temperatures ranging from -40°C to 125°C.
LM4881M/NOPB
LM4881M/NOPB by Texas Instruments is a Class AB audio amplifier with 2 channels and 0.15W nominal output power. It operates b/w -40 to 85°C, has a harmonic distortion of 0.1%, and supports a max supply voltage of 5.5V. Ideal for industrial applications requiring small outline packages and low power consumption.
LMH6643MAX
LMH6643MAX by Texas Instruments is a video amplifier with 2 functions, operating temperature range of -40 to 85°C. It has a nominal bandwidth of 130 kHz and can operate on supply voltages from 2.7V to 12.8V. Ideal for audio/video applications requiring high-speed signal amplification in industrial settings.
MAX9722AETE-T
MAX9722AETE-T by Maxim Integrated is a 16-terminal audio amplifier IC with 2 channels. It operates at temperatures from -40 to 85°C and requires a supply voltage of 2.4-5.5V, drawing a max current of 13mA. With a nominal output power of 0.13W and bandwidth of 0.022kHz, it is ideal for industrial audio applications in compact spaces.
TDA7052
Philips Components
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T8; Gain: 40 dB;
LME49811TB
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR;
LM1875T/LB02
LM1875T/LB02 by Texas Instruments is a Class AB audio amplifier with 1 channel and 20W output power. It operates b/w 16-60V, has low harmonic distortion at 1%, and a nominal bandwidth of 0.07 kHz. Ideal for audio applications requiring high-quality sound amplification in commercial temperature environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM4861MX/NOPB
LM4871MX/NOPB
LM4871MX/NOPB by Texas Instruments is an audio amplifier IC with 3W output power, 10% harmonic distortion, and 5V supply voltage. It is used in industrial applications requiring small outline package style for audio amplification.
LM4871MMX/NOPB
LM4871MMX/NOPB by Texas Instruments is a small outline, thin profile audio amplifier with a power supply of 5V. It has a nominal output power of 3W and operates in an industrial temperature range (-40 to 85°C). This amplifier is suitable for applications requiring high-quality audio amplification in compact devices.
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LM4861MX
LM4871MM/NOPB
LM4880M
LM4861M/NOPB
LM4861M/NOPB by Texas Instruments is an audio amplifier IC with 1.6W output power and 26dB gain. It operates b/w -40 to 85°C, suitable for industrial applications. This CMOS technology device has a small outline package with surface mount capability, making it ideal for compact audio systems.
LM4871M/NOPB
LM4871MX
LM4861M
LM4864M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved