Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Parana Technologies
$9.091
$844.270
$8.182
DigiPath Technology Company
$10.011
$9.210
ChromeModa Solutions
$10.215
$8.376
IDEA Electronic Components Group
$9.704
$9.194
AZTECH Wire
$18.275
One Stop Electronics
$38.000
Corphita
Northwest PG Solutions
Native Components
Multiplexer & Demultiplexer 54F157ALM attributes and parameters. Explore more Multiplexer & Demultiplexer devices from National Semiconductor
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
No. of Functions:
No. of Inputs:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
54F157ALM Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
EU2B-YS3203C
Idec
ROTARY SWITCH;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Changzhou Starsea Electronics
SN74HC153DR
SN74HC153DR by Texas Instruments is a CMOS multiplexer/demultiplexer with 4 inputs, 2 functions, and 4 bits. It operates at a supply voltage of 5V, has a propagation delay of 38ns, and can handle load capacitance up to 150pF. This industrial-grade component is ideal for applications requiring high-speed signal switching in compact electronic devices.
SN74F157AN3
SN74F157AN3 by Texas Instruments is a TTL multiplexer with 4 functions and 2 inputs. It has a propagation delay of 7ns at nominal voltage of 5V, making it ideal for commercial applications requiring fast signal switching. With a max operating temperature of 70°C and through-hole terminal form, it offers reliable performance in various electronic systems.
74LV251PW,112
NXP Semiconductors' 74LV251PW,112 is an 8-input multiplexer with a propagation delay of 45 ns at 3.3V supply voltage. It features a small outline package and operates in automotive temperature grades. Ideal for applications requiring fast switching b/w multiple input signals in compact spaces.
SN74LVC2G157DCU3
SN74LVC2G157DCU3 by Texas Instruments is a CMOS multiplexer with 2 inputs, 8 terminals, and a supply voltage range of 1.65V to 5.5V. It has a propagation delay of 14ns, operates in industrial temperature range (-40°C to 85°C), and features a small outline package for space-constrained applications.
CD74HC4052M96G4
Rochester Electronics
Multiplexer/Demultiplexers;
SN74HC153NSRG4
SN74HC153NSRG4 by Texas Instruments is a CMOS multiplexer/demultiplexer with 2 functions and 4 inputs. It has a propagation delay of 35 ns at 5V, operates in industrial temperature range (-40 to 85°C), and supports surface mount installation. Ideal for applications requiring high-speed signal switching in compact electronic systems.
74LVC257ADB,118
NXP Semiconductors' 74LVC257ADB,118 is a CMOS multiplexer with 4 functions and 2 inputs. It operates at a supply voltage of 2.7V to 3.6V, featuring a propagation delay of 6ns and output characteristics in the form of TRUE polarity. With a small outline package style, it is ideal for automotive applications requiring high-speed signal switching.
SNJ54150W-00
SNJ54150W-00 by Texas Instruments is a 16-input multiplexer with a 33 ns propagation delay, suitable for military-grade applications. It operates at a supply voltage range of 4.5V to 5.5V and has an inverted output polarity. This TTL technology device comes in a flatpack package style with surface mount capability.
74HC251D,653
MULTIPLEXER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN54AS151J
The Texas Instruments SN54AS151J is an 8-input TTL multiplexer in a ceramic rectangular package with 16 terminals. Operating temperature range from -55°C to 125°C makes it suitable for military-grade applications. With through-hole terminal form and 2.54mm pitch, it offers reliable performance in demanding environments.
SN74ALS253JP4
SN74ALS253JP4 by Texas Instruments is a TTL technology multiplexer with 2 functions, 4 inputs, and 16 terminals. It operates at temperatures b/w 0°C to 70°C and has a supply voltage of 5V. This ceramic package is commonly used in commercial applications requiring signal multiplexing.
SN74AS258NSRE4
SN74AS258NSRE4 by Texas Instruments is a 4-function, 2-input multiplexer with a propagation delay of 5ns. It operates at a nominal voltage of 5V and has a max power supply current of 25.2mA. This TTL technology device is ideal for applications requiring fast signal switching in commercial temperature environments.
SN74HC356DW3
SN74HC356DW3 by Texas Instruments is an 8-input multiplexer with a package style of small outline. It operates b/w -40°C to 85°C, making it suitable for industrial applications. With 20 terminals and CMOS technology, this device offers 3-state output characteristics for versatile circuit designs.
74HC151PW,118
NXP Semiconductors' 74HC151PW,118 is an 8-input multiplexer with a propagation delay of 51ns at 5V. It operates in the temperature range of -40 to 125°C and has a max supply voltage of 6V. This CMOS technology device is suitable for automotive applications due to its small outline package and low power consumption.
PCA9545APWT
PCA9545APWT by Texas Instruments is a 4-input multiplexer with 1ns propagation delay. Operating from -40 to 85°C, it has a supply voltage range of 2.3V to 5.5V and is ideal for industrial applications requiring precise signal routing in compact spaces.
TCA9548AMRGER
TCA9548AMRGER by Texas Instruments is a 24-terminal multiplexer with 1ns propagation delay. Operating b/w -40 to 85°C, it supports a supply voltage range of 1.65V to 5.5V and has 8 outputs for industrial applications requiring precise signal routing in compact spaces.
SN74HC4852PW
SN74HC4852PW by Texas Instruments is a 16-terminal CMOS multiplexer/demultiplexer with 2 functions, operating at a supply voltage range of 2-6V. It features a propagation delay of 115ns and output characteristics in the form of 3-STATE. This industrial-grade device is ideal for applications requiring true output polarity control and operates within a temperature range of -40 to 85°C.
HD74LS153P
Hitachi
MULTIPLEXER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74CB3Q3257RGYR
SN74CB3Q3257RGYR by Texas Instruments is a 4-function multiplexer with 0.12 ns propagation delay at 2.5V, suitable for industrial applications. It features 3-STATE output characteristics, operates b/w -40 to 85 °C, and has a compact chip carrier package style measuring 4mm x 3.5mm.
CBT3257APW,118
NXP Semiconductors' CBT3257APW,118 is a 4-function multiplexer with 16 terminals and a supply voltage of 5V. It features a propagation delay of 0.25ns, operates in industrial temperatures (-40 to 85°C), and has a compact package style for space-constrained applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved