Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LQP15MN22NG02D by Murata is a chip inductor with 0.022 uH nominal inductance, 2.6 ohm DC resistance, and 13 min quality factor at L-nom. It is used as a general purpose RF inductor for applications requiring a max operating temperature of 85 °C and self-resonance frequency of 2800 MHz.
Median Price
$0.146
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.068
1k+ parts
-
10k+ parts
Sea View Technologies
Bristol Electronics
Contempo Components LLC
ComSIT Distribution GmbH
Avant Electronics Limited
Rutronik
$0.048
Netsource Technology, Inc.
QIE Inc.
Legend Electronics Inc.
Vyrian
Nova Conductors
Prism Electronics
Resion
Corohmni
$0.842
AZTECH Wire
$20.600
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Alle Elektronik GmbH
Argo Parts USA
Continental Prestige Electronics
Netroflash
Surface mount capability allows for easy and convenient installation on PCBs, saving space and simplifying assembly.
Optimized for high-frequency applications, making it suitable for RF circuits and other high-speed electronic devices.
Ideal for applications requiring a low inductance value, ensuring precise performance in circuit designs.
Can withstand relatively high temperatures, suitable for a wide range of operating environments.
Capable of handling moderate levels of current, making it versatile for various electronic applications.
Low DC resistance helps reduce power losses and improve efficiency in electronic circuits.
Offers tight tolerance for consistent performance and reliability in circuit designs.
Fixed Inductors LQP15MN22NG02D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQP15MN22NG02D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Oct/2021
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
SRR1260-331K
Bourns
Bourns SRR1260-331K is a shielded, dual-ended fixed inductor with 330uH nominal inductance. Ideal for power applications, it has a max rated current of 1.15A and operates b/w -40 to 125°C. Its compact SMT package measures 12.5mm x 12.5mm x 6mm, making it suitable for general purpose use.
MLZ2012M4R7HT000
TDK
MLZ2012M4R7HT000 by TDK is an 0805 SMT fixed inductor with 4.7uH nominal inductance, 0.34 ohm DC resistance, and 20% tolerance. Ideal for general purpose applications, it operates b/w -55 to 125 °C with a max rated current of 0.4A.
HC2LP-2R2-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Placement: DUAL ENDED;
LQM18PHR22MFRL
Murata Manufacturing
Murata Manufacturing's LQM18PHR22MFRL is a shielded, surface mount fixed inductor with dual-ended terminals. With a nominal inductance of 0.22uH and max rated current of 1.25A, it is ideal for power applications. This general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C, making it suitable for various electronic devices.
5714
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: RADIAL;
HK100515NJ-T
Surface Mountable Electronic Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
74404052047
Wuerth Elektronik & Kg
Wurth Elektronik 74404052047 is a shielded SMT inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 2.3A, operating temperature range from -40 to 125°C, and self-resonance frequency of 57MHz. Ideal for general purpose use with AEC-Q200 reference standard compliance.
DR125-330-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LLQ2012-F33NG
Toko
LLQ2012-F33NG by Toko is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a max rated current of 0.5 A.
LQM21PHR47NG0D
Murata Manufacturing's LQM21PHR47NG0D is an 0805 SMT fixed inductor with 0.47uH nominal inductance, 1.3A max current, and -55 to 150°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core material.
74477020
The Wurth Elektronik 74477020 is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 100 uH and can handle a max rated current of 2.2 A. This general purpose inductor is commonly used for power applications.
LBR2012T100K8
Taiyo Yuden
LBR2012T100K8 by Taiyo Yuden is an 0805 fixed inductor with a nominal inductance of 10uH. It operates b/w -40 to 105°C, with a max rated current of 0.15A and DC resistance of 0.36 ohm at 30%. Ideal for RF applications due to its self-resonance frequency of 32MHz and general purpose design.
Z-7E
Ohmite Manufacturing
Z-7E by Ohmite Manufacturing is a radial fixed inductor with 84uH nominal inductance, 1A max current, and 13MHz self-resonance freq. Ideal for RF applications due to its single-layer construction and flat terminal shape in a tubular package.
3613C100K
TE Connectivity
TE Connectivity's 3613C100K is a chip inductor with 10uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and wraparound shape, it operates at -30 to 100°C with max current of 0.25A. With ferrite core material and SMT packaging, it offers high Q-factor at 2.52MHz test frequency.
CTX100-5-52M-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
DR73-101-R
MLZ2012M470WT000
MLZ2012M470WT000 by TDK is an 0805 SMT fixed inductor with 47uH nominal inductance, 3.7ohm DC resistance, and 0.17A max rated current. Ideal for general purpose applications, this shielded inductor operates b/w -55 to 125 °C and features a ferrite core material.
74438356022
74438356022 by Wurth Elektronik is a shielded fixed inductor with dual-ended terminals. It has a nominal inductance of 2.2uH, max rated current of 4.7A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 34MHz and is constructed with iron alloy material.
LQH43MN100K03L
Murata Manufacturing's LQH43MN100K03L is a surface mount fixed inductor with 10uH nominal inductance, 0.4A max current, and 35 min quality factor at 1MHz. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 85°C.
DRA124-2R2-R
Eaton Corporation
DRA124-2R2-R by Eaton Corp is a shielded fixed inductor with 2.2uH nominal inductance, 14A max current, and -40 to 165°C operating temp range. Ideal for general purpose applications requiring compact SMT package with TR packing method.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQP15MN8N2B02D
Murata Manufacturing's LQP15MN8N2B02D is a chip inductor with 0.0082 uH nominal inductance, 1.1 ohm DC resistance, and 5500 MHz self-resonance frequency. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -40 to 85 °C.
LQP15MN10NG02D
LQP15MN10NG02D by Murata is a chip inductor with 0.01uH nominal inductance, 1.3 ohm DC resistance, and 13 min quality factor at 500 MHz. It is used as an RF inductor for general purpose applications requiring a self-resonance frequency of 4500 MHz. The dual-ended terminal placement and compact 0402 size make it suitable for surface mount installations.
LQP15MN3N9B02D
LQP15MN4N7B02D
Murata Manufacturing's LQP15MN4N7B02D is a 0402 chip inductor with 0.0047 uH nominal inductance, 6000 MHz self-resonance frequency, and 0.6 ohm DC resistance. It is a dual-ended surface mount RF inductor suitable for general purpose applications.
LQP15MN1N0W02D
LQP15MN6N8B02D
LQP15MN1N2B02D
LQP15MN5N1B02D
LQP15MN2N5W02D
LQP15MN1N7W02D
LQP15MN1N7W02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.0017 uH. It has a max rated current of 0.28 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N0B02D
LQP15MN3N0B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.003 uH and a max rated current of 0.19 A. This general purpose inductor is commonly used in RF applications.
LQP15MN1N1W02D
LQP15MN3N3B02D
LQP15MN3N5W02D
LQP15MN2N7B02D
The Murata Manufacturing LQP15MN2N7B02D is a chip inductor with 0.0027 uH nominal inductance, 6000 MHz self-resonance frequency, and 85 °C max operating temperature. It is a surface-mount RF inductor ideal for general purpose applications requiring high quality factor and low DC resistance.
LQP15MN33NG02D
LQP15MN33NG02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It has a max rated current of 0.06 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N6B02D
LQP15MN3N6B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a test frequency of 500 MHz and a nominal inductance of 0.0036 uH. This general purpose inductor is commonly used in RF applications.
LQP15MN1N8B02D
LQP15MN6N2B02D
LQP15MN4N3B02D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved