Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQP15MN1N8B02D is a chip inductor with 0.0018uH nominal inductance, 6000MHz self-resonance frequency, and 13 min quality factor. Ideal for RF applications due to its 500MHz test frequency, dual-ended terminals, and compact 0402 size.
Median Price
$0.134
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Mobius Materials
$0.050
$0.040
Nova Conductors
$0.063
ComSIT Distribution GmbH
Bristol Electronics
PC Components Company LLC
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Semi Source
Prism Electronics
Vyrian
J2 Sourcing AB
EMSNET
Resion
Speed Components Ltd
Rebound Electronics
Legend Electronics Inc.
Argo Parts USA
$0.061
Continental Prestige Electronics
$0.062
Corohmni
$0.137
Benley Electronics
$0.750
AZTECH Wire
$13.710
Kepictronics
GreenTree Electronics
Speed Components Ltd (Excess)
Eastek
Alle Elektronik GmbH
Robosynatics
Lucentia Tech
$0.447
$0.438
Authorized Procurement Solutions
Netroflash
$0.060
$0.059
Cyclops Electronics Ltd (Excess)
This inductor can easily be mounted onto a PCB, making it convenient for automated assembly processes.
Designed to operate at a high frequency, ideal for RF applications.
Provides a specific inductance value, suitable for the desired application.
Capable of handling a relatively high current, ensuring reliable performance.
Low resistance helps in minimizing power losses and improving efficiency.
Offers a tight tolerance level, ensuring consistency in performance.
Fixed Inductors LQP15MN1N8B02D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQP15MN1N8B02D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Oct/2021
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Infineon Technologies
LQH32PN2R2NN0L
Murata Manufacturing
LQH32PN2R2NN0L by Murata is a shielded, surface mount inductor with 2.2uH nominal inductance and 1.6A max rated current. Ideal for RF applications, it features a self-resonance frequency of 70MHz and operates b/w -40°C to 125°C.
DR127-100-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLZ1608M100WTD25
TDK
MLZ1608M100WTD25 by TDK is a 0603 SMT inductor with 10uH nominal inductance, 1.05 ohm DC resistance, and 0.25A max rated current. Ideal for general purpose applications, it features ferrite core material and operates b/w -55 to 125 °C.
B82477-G4104-M
B82477-G4104-M by TDK is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.7A max rated current. Ideal for power applications, it features a dual-ended terminal placement and ferrite core material, operating b/w -55°C to 125°C.
U10-9
Torotel Products
The Torotel Products U10-9 is a shielded radial fixed inductor with 20000 uH nominal inductance. It operates b/w -55 to 85 °C, has 2.9 ohm DC resistance, and uses molybdenum permalloy core material. Ideal for RF applications due to its circular package design and flexible lead terminals at 0.001 MHz test frequency.
XAL5050-103MEB
Coilcraft
Coilcraft XAL5050-103MEB is a shielded, surface mount fixed inductor with 10uH nominal inductance and 4.9A max rated current. Ideal for power applications, it features dual-ended terminals, operates b/w -40 to 125°C, and has a self-resonance frequency of 15MHz.
SPM3012T-1R5M
The TDK SPM3012T-1R5M is a 1.5uH fixed inductor with shielded construction, ideal for general purpose applications. It offers a max operating temperature of 125°C and can handle a rated current of 2.5A, making it suitable for various SMT designs requiring reliable performance in a compact package.
SRP1038A-470M
Bourns
Bourns SRP1038A-470M is a shielded, dual-ended SMT inductor with 47uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 5MHz. AEC-Q200 compliant, this general-purpose inductor offers high quality factor and wraparound terminals.
B82464A4104K000
TDK B82464A4104K000 is a surface mount fixed inductor with 100uH nominal inductance, 0.28 ohm DC resistance, and 1.03A max rated current. Ideal for power applications, it features dual-ended terminals and ferrite core material. Operating temperature ranges from -55 to 150°C making it suitable for various general purpose inductor needs.
K504
Opt Industries
K504 by Opt Industries is a shielded fixed inductor with 4 terminals, suitable for power applications. With a nominal inductance of 7500 uH and max rated current of 0.49 A, it offers general purpose functionality. Featuring self-resonance frequency of 0.34 MHz and DC resistance of 3.8 ohm, this cylindrical package is ideal for various electronic circuits.
DR74-4R7-R
Cooper Industries
SDE0604A-101K
Bourns SDE0604A-101K is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 10% tolerance. Ideal for power applications, it has a max rated current of 0.8A and operates b/w -40 to 125°C. Its ferrite core material ensures high performance in a compact rectangular package.
LQW15AN11NG00D
Murata Manufacturing's LQW15AN11NG00D is a wirewound chip inductor with 0.011uH nominal inductance, 30 min quality factor at 250 MHz. Ideal for RF applications, it operates b/w -55 to 125 °C with a max current of 0.5A.
IHLP4040DZER6R8M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Maximum Operating Temperature: 125 Cel;
4646
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Minimum Operating Temperature: -55 Cel;
DR127-220-R
XFL4020-332MEB
XFL4020-332MEB by Coilcraft is a surface mount, shielded fixed inductor with a nominal inductance of 3.3 uH and max rated current of 5.2 A. It is commonly used as a power inductor in general purpose applications.
74438357068
Wuerth Elektronik & Kg
Wurth Elektronik 74438357068 is a shielded fixed inductor with 6.8uH nominal inductance, suitable for power applications. It has a max rated current of 3A, operates b/w -40 to 125°C, and features a self-resonance frequency of 19.5MHz. Ideal for general purpose use in SMT packages with dual-ended terminals.
74479775210
Wurth Elektronik 74479775210 is an 0805 fixed inductor with 1uH nominal inductance, suitable for power applications. It has a max rated current of 1.1A and operates at temperatures ranging from -40 to 125°C. This general purpose inductor features dual-ended terminals and wraparound shape, making it ideal for SMT installations.
5204
Frontier Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 4; Shielded: NO; Surface Mount: NO; Terminal Shape: FLEXIBLE LEAD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQP15MN8N2B02D
Murata Manufacturing's LQP15MN8N2B02D is a chip inductor with 0.0082 uH nominal inductance, 1.1 ohm DC resistance, and 5500 MHz self-resonance frequency. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -40 to 85 °C.
LQP15MN10NG02D
LQP15MN10NG02D by Murata is a chip inductor with 0.01uH nominal inductance, 1.3 ohm DC resistance, and 13 min quality factor at 500 MHz. It is used as an RF inductor for general purpose applications requiring a self-resonance frequency of 4500 MHz. The dual-ended terminal placement and compact 0402 size make it suitable for surface mount installations.
LQP15MN3N9B02D
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQP15MN4N7B02D
Murata Manufacturing's LQP15MN4N7B02D is a 0402 chip inductor with 0.0047 uH nominal inductance, 6000 MHz self-resonance frequency, and 0.6 ohm DC resistance. It is a dual-ended surface mount RF inductor suitable for general purpose applications.
LQP15MN1N0W02D
LQP15MN6N8B02D
LQP15MN1N2B02D
LQP15MN5N1B02D
LQP15MN2N5W02D
LQP15MN1N7W02D
LQP15MN1N7W02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.0017 uH. It has a max rated current of 0.28 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N0B02D
LQP15MN3N0B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.003 uH and a max rated current of 0.19 A. This general purpose inductor is commonly used in RF applications.
LQP15MN1N1W02D
LQP15MN3N3B02D
LQP15MN3N5W02D
LQP15MN2N7B02D
The Murata Manufacturing LQP15MN2N7B02D is a chip inductor with 0.0027 uH nominal inductance, 6000 MHz self-resonance frequency, and 85 °C max operating temperature. It is a surface-mount RF inductor ideal for general purpose applications requiring high quality factor and low DC resistance.
LQP15MN33NG02D
LQP15MN33NG02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It has a max rated current of 0.06 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N6B02D
LQP15MN3N6B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a test frequency of 500 MHz and a nominal inductance of 0.0036 uH. This general purpose inductor is commonly used in RF applications.
LQP15MN6N2B02D
LQP15MN4N3B02D
LQP15MN1N8W02B
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved