Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQP15MN8N2B02D is a chip inductor with 0.0082 uH nominal inductance, 1.1 ohm DC resistance, and 5500 MHz self-resonance frequency. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -40 to 85 °C.
Median Price
$0.041
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Verical
Nova Conductors
$0.071
Component Electronics Inc.
$0.190
$0.140
$0.130
Bristol Electronics
$0.300
$0.150
$0.060
$0.037
Chip Stock
Sensible Micro Corp
ComSIT Distribution GmbH
Dan-Mar Components
Netsource Technology, Inc.
PC Components Company LLC
Legend Electronics Inc.
NexGen Digital
Prism Electronics
Speed Components Ltd
LIBRA Elektronik GmbH
Vyrian
Rebound Electronics
Semicontronic
$0.035
$0.034
Argo Parts USA
$0.070
$0.068
Continental Prestige Electronics
$0.069
Corohmni
$0.286
Aztec Data Supply Inc.
$0.830
Advanced Electronics
$0.845
$0.802
AZTECH Wire
$20.080
Kepictronics
Cyclops Electronics Ltd (Excess)
Futuretech Components
Alle Elektronik GmbH
Netroflash
$0.067
$0.066
This product can be easily mounted on a PCB, allowing for easy installation and space-saving design.
Dual-ended terminal placement provides flexibility in circuit design and easy connection options.
Designed to operate efficiently at 500 MHz frequency, suitable for various RF applications.
Chip construction ensures durability and reliability.
Ideal inductance value for RF applications, providing the required level of inductance.
Can handle a maximum rated current of 0.11 A, suitable for typical electronic circuit needs.
Can operate at high temperatures up to 85°C, suitable for various environments.
Low DC resistance helps in minimizing power losses and improving overall efficiency.
High self-resonance frequency allows for better performance in RF applications.
Low tolerance ensures consistent and accurate inductance values for precise circuit design.
Fixed Inductors LQP15MN8N2B02D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQP15MN8N2B02D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Oct/2021
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Bytesonic Electronics
MLZ2012M150WT
TDK
The TDK MLZ2012M150WT is a fixed inductor with 15uH nominal inductance, 40MHz self-resonance frequency, and -55 to 125°C operating temperature range. Ideal for RF applications, this shielded SMT inductor features dual-ended terminals and ferrite core construction.
DRA73-1R0-R
Eaton Corporation
DRA73-1R0-R by Eaton Corporation is a shielded fixed inductor with a nominal inductance of 1 uH and max rated current of 8.22 A. It is commonly used as a general purpose inductor in various applications due to its compact size (3.55 mm height, 7.6 mm length and width) and wide operating temperature range (-40°C to 165°C).
DR125-4R7-R
Eaton Corporation's DR125-4R7-R is a shielded, dual-ended power inductor with 4.7uH nominal inductance and 7.18A max rated current. Ideal for general purpose applications, this SMT inductor features a matte tin over nickel terminal finish and operates b/w -40 to 125 °C temperatures.
LQH32CN1R0M33L
Murata Manufacturing
Murata Manufacturing's LQH32CN1R0M33L is a 1uH general purpose inductor with 1A max current and 100MHz self-resonance freq. Ideal for power applications, it's a surface mount component with dual-ended terminals and ferrite core, operating b/w -40°C to 85°C.
P1252.602NLT
Pulse Electronics
P1252.602NLT by Pulse Electronics is a fixed inductor with 6uH nominal inductance, 7.5A max current, and -40 to 130°C operating temp range. Ideal for power applications, it's a surface-mount cylindrical package with dual-ended terminals suitable for general purpose use.
DR125-102-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQG15HN4N3S02D
Murata Manufacturing's LQG15HN4N3S02D is a 0402-sized fixed inductor with 0.0043 uH nominal inductance, suitable for RF applications. With a max operating temperature of 125°C and self-resonance frequency of 6000 MHz, it offers high quality factor and low DC resistance at 0.15 ohm. The dual-ended terminal placement and multilayer chip construction make it ideal for general purpose inductor needs.
B82464G4222M000
The TDK B82464G4222M000 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 6.5A max rated current. Ideal for power applications, it operates b/w -55°C to 150°C, featuring a ferrite core and AEC-Q200 reference standard compliance.
DR127-101-R
Eaton Corporation's DR127-101-R is a shielded, surface mount fixed inductor with 100uH nominal inductance. With dual-ended terminals and matte tin finish, it operates b/w -40 to 125°C, handling up to 1.96A current. Ideal for power applications requiring general purpose inductors due to its ferrite core and compact rectangular package design.
5248
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Nominal Inductance (L): 68 uH;
TLC/0.5A-101M-00
Fastron Electronics
TLC/0.5A-101M-00 by Fastron Electronics is a general purpose inductor with 100uH nominal inductance, 0.22 ohm DC resistance, and 20% tolerance. It has a toroidal construction, radial terminal placement, and operates b/w -55 to 115 °C. Ideal for applications requiring fixed inductors with circular package style and powdered iron core material.
CIGW160808EHR47MLC
Samsung Electro-mechanics
Samsung Electro-mechanics CIGW160808EHR47MLC is a fixed inductor with dual-ended terminals, suitable for power applications. Featuring 0.47uH nominal inductance, 3A max current, and -40 to 125°C operating range, it's ideal for general purpose use in rectangular package design.
74438356047
Wuerth Elektronik & Kg
Wurth Elektronik 74438356047 is a shielded SMT inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 2.9A and operates b/w -40 to 125°C, making it ideal for general purpose use. The inductor features dual-ended terminals, measures 4.1x4.1x2.1mm (LxWxH), and complies with AEC-Q200 standards.
LQG15HS10NJ02D
LQG15HS10NJ02D by Murata is a 0402-sized multilayer chip inductor with 0.01 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, rated current of 0.5 A, and self-resonance frequency of 3400 MHz. Ideal for general purpose use due to its high quality factor and dual-ended terminal placement.
LQW18AN27NG10D
Murata Manufacturing's LQW18AN27NG10D is a wirewound chip inductor with 0.027uH nominal inductance, 2800MHz self-resonance frequency, and 42 min quality factor. Ideal for RF applications, this SMT component operates b/w -55 to 125 °C with a max rated current of 0.59A.
MLZ2012N100LTD25
MLZ2012N100LTD25 by TDK is an 0805 fixed inductor with 10uH nominal inductance, 0.3 ohm DC resistance, and 0.5A max rated current. Ideal for general purpose applications, this shielded SMT inductor operates b/w -55 to 125 °C and is AEC-Q200 compliant.
IHLP3232CZER100M11
Vishay Intertechnology
Vishay Intertechnology's IHLP3232CZER100M11 is a shielded fixed inductor with 10uH nominal inductance, 5.3A max current, and 12MHz self-resonance freq. Ideal for DC-DC converters, it operates b/w -55°C to 125°C. With SMT packaging and dual-ended terminals, it suits various general-purpose applications.
ASMPH-0805-4R7M-T
Abracon
Abracon's ASMPH-0805-4R7M-T is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 0.8A max rated current. Ideal for power applications, it features a ferrite core, operates b/w -40 to 85°C, and has a self-resonance frequency of 30MHz.
DR127-220-R
Eaton Corporation's DR127-220-R is a shielded, surface mount fixed inductor with 22uH nominal inductance and 4A max rated current. Ideal for power applications, this general purpose inductor has a dual-ended terminal placement and operates b/w -40°C to 125°C.
CTX100-2-52M-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQP15MN10NG02D
LQP15MN10NG02D by Murata is a chip inductor with 0.01uH nominal inductance, 1.3 ohm DC resistance, and 13 min quality factor at 500 MHz. It is used as an RF inductor for general purpose applications requiring a self-resonance frequency of 4500 MHz. The dual-ended terminal placement and compact 0402 size make it suitable for surface mount installations.
LQP15MN3N9B02D
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQP15MN4N7B02D
Murata Manufacturing's LQP15MN4N7B02D is a 0402 chip inductor with 0.0047 uH nominal inductance, 6000 MHz self-resonance frequency, and 0.6 ohm DC resistance. It is a dual-ended surface mount RF inductor suitable for general purpose applications.
LQP15MN1N0W02D
LQP15MN6N8B02D
LQP15MN1N2B02D
LQP15MN5N1B02D
LQP15MN2N5W02D
LQP15MN1N7W02D
LQP15MN1N7W02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.0017 uH. It has a max rated current of 0.28 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N0B02D
LQP15MN3N0B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.003 uH and a max rated current of 0.19 A. This general purpose inductor is commonly used in RF applications.
LQP15MN1N1W02D
LQP15MN3N3B02D
LQP15MN3N5W02D
LQP15MN2N7B02D
The Murata Manufacturing LQP15MN2N7B02D is a chip inductor with 0.0027 uH nominal inductance, 6000 MHz self-resonance frequency, and 85 °C max operating temperature. It is a surface-mount RF inductor ideal for general purpose applications requiring high quality factor and low DC resistance.
LQP15MN33NG02D
LQP15MN33NG02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It has a max rated current of 0.06 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N6B02D
LQP15MN3N6B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a test frequency of 500 MHz and a nominal inductance of 0.0036 uH. This general purpose inductor is commonly used in RF applications.
LQP15MN1N8B02D
LQP15MN6N2B02D
LQP15MN4N3B02D
LQP15MN8N2B02B
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved