Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's XAL4040-103MEC is a shielded, surface mount inductor with 10uH nominal inductance and 3.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 24MHz and DC resistance of 0.0924 ohm.
Median Price
$1.080
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Farnell
1+ parts
-
100+ parts
1k+ parts
$0.901
10k+ parts
Maritex
$0.892
Nova Conductors
$1.110
DigiKey Marketplace
$2.710
Vyrian
Flip Electronics
Chip Stock
LIBRA Elektronik GmbH
Sensible Micro Corp
Bristol Electronics
Lantek
Sea View Technologies
PC Components Company LLC
Inventory MP
LWI Electronics Inc
ComSIT Distribution GmbH
J2 Sourcing AB
Corohmni
$0.502
Aztec Data Supply Inc.
$0.530
AZTECH Wire
$0.650
$0.620
$0.610
$0.600
Advanced Electronics
$1.009
$0.959
Argo Parts USA
Netroflash
Ampacity Inc.
$1.400
Semicontronic
$1.365
$1.358
Continental Prestige Electronics
$2.310
$1.660
$0.911
Benley Electronics
Resion (Excess)
Computer Components Inc. - USA
Kepictronics
Formix International (Excess)
Robosynatics
Lucentia Tech
$4.506
Surface mount technology allows for easy and efficient assembly onto circuit boards, making this inductor a convenient choice for manufacturers.
Shielding helps prevent electromagnetic interference (EMI), resulting in better overall performance and reliability of the product.
Dual-ended terminal placement provides flexibility in circuit design and allows for more versatile applications.
With a nominal inductance of 10 uH, this inductor is suitable for a wide range of power applications, providing the necessary inductance value.
The high maximum rated current of 3.1 A ensures that this inductor can handle heavy load currents, making it a reliable choice for power-related applications.
With a minimum operating temperature of -40°C, this inductor can withstand harsh environmental conditions, making it suitable for a variety of applications.
Being a general-purpose inductor, this product can be used in a wide range of circuits and applications, offering versatility and flexibility.
Fixed Inductors XAL4040-103MEC attributes and parameters. Explore more Fixed Inductors devices from Coilcraft
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
XAL4040-103MEC Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Weitron Technology
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
B82498F3471J000
TDK
The TDK B82498F3471J000 is a surface mount fixed inductor with 0.47uH nominal inductance, 1.9 ohm DC resistance, and 650 MHz self-resonance frequency. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -55 to 125 °C, with a Q factor measured at 100MHz.
MLF1608E100KTD00
TDK's MLF1608E100KTD00 is a shielded, surface mount inductor with 10uH nominal inductance and 30MHz self-resonance frequency. Ideal for RF applications, this general purpose inductor has a max operating temperature of 125°C and DC resistance of 1.7 ohm.
5714
Bourns
The Bourns 5714 is a fixed inductor with a nominal inductance of 1250 uH and max rated current of 1.75 A. It features radial terminal placement, toroidal construction, and is ideal for high current applications. With a DC resistance of 0.85 ohm, it operates b/w -55 to 105 °C, making it suitable for general purpose inductor needs.
U05-3
Torotel Products
The Torotel Products U05-3 is a shielded RF inductor with 20000 uH nominal inductance, 1.23 ohm DC resistance, and operates b/w -55 to 85 °C. It features radial terminal placement, molybdenum permalloy core material, and circular package shape. Ideal for general purpose applications requiring precise inductance values at 0.001 MHz test frequency.
B82422-T1104-K
B82422-T1104-K by TDK is a surface mount fixed inductor with 100uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and a self-resonance frequency of 8MHz. This general purpose inductor features dual-ended terminals and a rectangular package design.
SRN6045-470M
Bourns SRN6045-470M is a shielded SMT inductor with 47uH nominal inductance, 1.1A max current, and -40 to 125°C operating temp. Ideal for power applications due to its general purpose design and ferrite core material.
LQH32CN221K23L
Murata Manufacturing
Murata Manufacturing's LQH32CN221K23L is a 220uH fixed inductor with dual-ended terminals, suitable for RF applications. Featuring a self-resonance frequency of 6.8MHz and max rated current of 0.07A, this SMT inductor has a compact size of 3.2mm x 2.5mm x 2mm, making it ideal for general purpose use in electronic circuits.
DFE201612E-2R2M=P2
Murata Manufacturing's DFE201612E-2R2M=P2 is a shielded, dual-ended SMT inductor with 2.2uH nominal inductance and 1.8A rated current. Ideal for power applications, it operates b/w -40 to 125°C with a compact size of 2x1.6x1.2mm, making it suitable for various electronic devices.
#FSLB2520-470K
Murata Manufacturing's #FSLB2520-470K is a chip fixed inductor with 47uH nominal inductance, 5.4 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications, this dual-ended SMT inductor operates b/w -40°C to 85°C and has a max rated current of 0.1A.
DR74-4R7-R
Eaton Corporation
DR74-4R7-R by Eaton Corp is a fixed inductor with 4.7uH nominal inductance, 3.34A max current, and -40 to 125°C operating temp range. It's a shielded SMT inductor for power applications, featuring dual-ended terminals and ferrite core material.
LBM2016TR82J
Taiyo Yuden
LBM2016TR82J by Taiyo Yuden is a surface mount fixed inductor with 0.82 uH nominal inductance, suitable for RF applications. It features dual-ended terminals, operates at -40 to 105 °C, and has a max rated current of 0.39 A. Ideal for general purpose use with a self-resonance frequency of 250 MHz.
SRU2013-150Y
Bourns SRU2013-150Y is a shielded, surface mount inductor with 15uH nominal inductance and 0.85 ohm DC resistance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.46A. Its ferrite core and self-resonance frequency of 30MHz make it suitable for general purpose use.
5606
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Shape: PRINTED WIRING PIN;
74438336100
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 74438336100 is a shielded, surface mount fixed inductor with dual-ended terminals. Featuring 10uH nominal inductance, 1.2A max rated current, and -40 to 125°C operating temperature range. Ideal for power applications requiring a general purpose inductor with a compact rectangular package design.
ELL6SH390M
Panasonic ELL6SH390M is a shielded, surface mount fixed inductor with 39uH nominal inductance. It has a max rated current of 0.65A and operates b/w -40 to 105°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
SRN2512-1R0M
Bourns SRN2512-1R0M is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.5A max rated current. Ideal for power applications, it operates b/w -55 to 125°C with a self-resonance frequency of 120MHz.
CM322522-2R2KL
Bourns CM322522-2R2KL is a 1210 SMT inductor with 2.2uH nominal inductance, suitable for RF applications. It has a max operating temp of 125°C, 0.32A rated current, and 30 min quality factor at L-nom. Ideal for general purpose use due to its ferrite core material and self-resonance frequency of 75MHz.
SRR1260-330M
Bourns SRR1260-330M is a shielded, surface mount inductor with 33uH nominal inductance and 3A max rated current. Ideal for power applications, it features a self-resonance frequency of 9.97MHz and operates b/w -40°C to 125°C temperature range.
IHLP2525CZER6R8M11
Vishay Intertechnology's IHLP2525CZER6R8M11 is a shielded, surface mount inductor with 6.8uH nominal inductance and 5.5A max rated current. Ideal for high current applications, this general purpose inductor has a DC resistance of 0.0468 ohm and operates b/w -55°C to 125°C temperature range.
30028
Vanguard Electronics
GENERAL PURPOSE INDUCTOR; Package Style (Meter): SMT; Tolerance: 10 %; Package Length: 2.794 mm; Maximum Rated Current: .13 A; Minimum Operating Temperature: -55 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XAL4030-472MEC
Coilcraft
Coilcraft XAL4030-472MEC is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 36MHz.
XAL4030-332MEC
Coilcraft's XAL4030-332MEC is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 6.6A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 43MHz and operates b/w -40°C to 125°C.
XAL4020-102MEC
Coilcraft XAL4020-102MEC is a shielded, surface mount inductor with 1uH nominal inductance and 9.6A max rated current. Ideal for power applications, it has a self-resonance frequency of 79MHz and operates b/w -40°C to 125°C.
XAL4020-222MEC
Coilcraft XAL4020-222MEC is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 5.5A max rated current. Ideal for power applications, it has a self-resonance frequency of 52MHz and operates b/w -40 to 125°C.
XAL4020-102MEB
Coilcraft XAL4020-102MEB is a shielded SMT inductor with 1uH nominal inductance, 9.6A max current, and 79MHz self-resonance freq. Ideal for power applications due to its high temp range (-40°C to 125°C) and AEC-Q200 standard compliance.
XAL4030-682MEC
XAL4030-682MEC by Coilcraft is a surface mount, shielded fixed inductor with a nominal inductance of 6.8 uH and max rated current of 3.9 A. It is a general purpose inductor suitable for power applications, featuring a composite core material and operating temperature range from -40 to 125 °C.
XAL4030-472MEB
Coilcraft XAL4030-472MEB is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 36MHz.
XAL4020-152MEC
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
XAL4020-222MEB
Coilcraft XAL4020-222MEB is a shielded SMT inductor with 2.2uH nominal inductance, 5.5A max current, and 125°C max operating temp. Ideal for power applications due to its general purpose design and AEC-Q200 reference standard compliance.
XAL4040-153MEC
Coilcraft XAL4040-153MEC is a shielded, surface mount fixed inductor with 15uH nominal inductance and 2.8A max rated current. Ideal for power applications, it has a self-resonance frequency of 20MHz and operates b/w -40°C to 125°C.
XAL4030-332MEB
XAL4020-222MED
XAL4040-103MEB
Coilcraft XAL4040-103MEB is a shielded, surface mount inductor with 10uH nominal inductance and 3.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 24MHz.
XAL4030-682MEB
XAL4020-152MEB
XAL4040-153MEB
XAL4020-221MEC
XAL4020-221MEB
XAL4020-401MEC
Coilcraft XAL4020-401MEC is a shielded SMT inductor with 0.4uH nominal inductance, 14A max current, and 145MHz self-resonance freq. Ideal for power applications due to its compact rectangular package and composite core material.
XAL4040-103MSC
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved