Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 87831-2020 is a board connector with 20 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1G ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 105°C.
Median Price
$1.308
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Sager
1+ parts
$0.891
100+ parts
$0.700
1k+ parts
-
10k+ parts
Avnet
$1.020
Chip1Stop
$1.110
Adafruit Industries
$1.262
$1.199
Arrow
$1.365
$1.234
$1.157
Mouser Electronics
$1.810
$1.460
$1.220
$1.120
Newark
$2.250
$1.840
$1.550
Farnell
$2.890
$2.060
$1.500
Element14
$2.970
$2.290
$1.930
DigiKey
$3.230
TTI
Verical
TTI Europe
Heilind Electronics
$0.917
$0.748
$0.884
Interstate Connecting
Digiode
$0.641
TestEquity
$0.770
Nova Conductors
$1.580
Semtec, LLC
Vyrian
North Shore Components
VNN
J2 Sourcing AB
Prism Electronics
NAC Semi
$1.690
EMSNET
Flex Direct, LLC
Bristol Electronics
IBS Electronics
$1.079
Microfarads
Inventory MP
Semi Source
Jameco Electronics
Cyclops Electronics Ltd
Electronics Depot
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Component Sense
LIBRA Elektronik GmbH
Sunrise Surplus Inc.
A2Z Electronics, Inc.
Corphita
$0.608
Semicontronic
$0.620
$0.604
$0.601
Modulus Dynamics
$1.225
Advanced Electronics
Argo Parts USA
$1.380
Netroflash
Continental Prestige Electronics
$2.430
$1.700
Aztec Data Supply Inc.
$2.646
Andel Nordic
$5.296
$5.084
Perfect Parts
Abacus Technologies
Glotronic Ltd.
Kepictronics
Authorized Procurement Solutions
Assy Fe
GreenTree Electronics
Robosynatics
$17.548
Lucentia Tech
Cyclops Electronics Ltd (Excess)
This tight pitch allows for a high number of contacts to be packed into a small space, making this product ideal for applications where space is limited.
The compact size of the body makes this connector suitable for applications where space constraints are a concern.
With high insulation resistance, this connector provides reliable electrical insulation between contacts, reducing the risk of short circuits.
The high dielectric strength of this connector allows it to withstand high voltages, making it suitable for a variety of applications.
The matte tin over nickel finish provides excellent durability and corrosion resistance, ensuring a reliable connection over time.
With a high maximum operating temperature, this connector can withstand elevated temperatures without sacrificing performance.
Having two rows loaded allows for more connections to be made, increasing the versatility and functionality of this connector.
With a high number of contacts, this connector is suitable for applications requiring multiple connections.
Headers & Edge Type Connectors 87831-2020 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
87831-2020 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - GCN 10623989 27/Feb/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Itt Semiconductor
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WT
Fairchild Semiconductor
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
103
Keystone Electronics
103 by Keystone Electronics is a PCB connector with 2 contacts, made of POLYBUTYLENE TEREPHTHALATE. It has a body length of 1.13" and depth of 0.335", with terminal pitch of 20.49mm. Ideal for straight mounting on boards, it features male contact gender and leaf-style contacts in a rectangular pattern.
47352-1001
Molex
Molex 47352-1001 is a PCB connector with 0.043" pitch, GOLD finish, and 500VAC voltage rating. Ideal for board mounting applications in commercial settings, featuring liquid crystal polymer insulator and male contact gender. Operating temperature range from -20 to 85 °C with durability of 5000 cycles.
801-43-038-10-003000
Mill-max Mfg
801-43-038-10-003000 by Mill-max Mfg is a BOARD CONNECTOR with GOLD OVER NICKEL finish. Featuring 38 contacts on a 2.54mm pitch, it's ideal for applications requiring FEMALE SOCKET connectors in a STRAIGHT mounting style on PCBs with UL94V-0 flammability rating.
ZHR-4
J S T Mfg
ZHR-4 by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.059" pitch, POLYAMIDE66 insulator, and 500VAC dielectric voltage. Ideal for applications requiring -25 to 85 °C temp range, UL94V-0 flammability rating, and signal current up to 1A.
70553-0002
Molex 70553-0002 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and operating temperature range of -40 to 105°C. Ideal for right-angle mounting on PCBs with rectangular contact pattern.
FTSH-105-01-L-DV-K-TR
Samtec
Samtec's FTSH-105-01-L-DV-K-TR is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring TIN over nickel finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable male connectors in black insulator material.
76155-5107
The Molex 76155-5107 is a board connector with 12 loaded rows and PCB contact row spacing of 1.3462mm. It features matte tin over nickel termination, glass-filled liquid crystal polymer insulator material, and copper alloy contacts. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
103948-9
TE Connectivity
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
FTSH-105-01-L-DV-K-P-FR
The Samtec FTSH-105-01-L-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications requiring straight mounting style.
52746-1071
Molex 52746-1071 FFC/FPC connector with 10 contacts, gold finish, and white insulator. Suitable for board mounting with a mating pitch of 0.020", operating from -40 to 85°C. Ideal for commercial applications requiring a durable, surface-mountable connector with UL certification.
FTSH-105-01-L-DV-K-A-P
Samtec's FTSH-105-01-L-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features gold over nickel finish, liquid crystal polymer insulator, and phosphor bronze contact material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
B8B-PH-SM4-TB(LF)(SN)
B8B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, made of COPPER ALLOY. It features Tin/Copper (Sn/Cu) termination finish and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.
640456-5
TE Connectivity 640456-5 is a BOARD CONNECTOR with 0.1" pitch, suitable for commercial applications. It features POLYBUTYLENE TEREPHTHALATE insulator, tin finish, and 5A signal current rating. Ideal for PCB mounting with RECTANGULAR contact pattern and FRICTION LOCK option.
B2B-XH-A-E(LF)(SN)
B2B-XH-A-E(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for commercial applications, this connector has a rated current of 3A and operates b/w -25 to 85 °C temperatures.
306-022-520-102
Edac
Edac 306-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. With POLYETHYLENE POLYESTER insulator and UL94V-0 flammability, it operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and dielectric voltage withstand capabilities.
G125-MS12005M1P
Harwin Plc
BOARD CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED;
8-188275-0
TE Connectivity 8-188275-0 is a 2-row board connector with 10 contacts, rated for 1.5A signal current at 100V. Featuring a mating contact pitch of 0.05", it has a body length of 0.578" and insulation resistance of 1Gohm. Ideal for PCB applications requiring high reliability and operating temperatures from -40 to +105°C.
DF11-8DP-2DSA(01)
Hirose Electric
DF11-8DP-2DSA(01) by Hirose Electric is a 2-row, 8-contact board connector with gold over nickel termination. Featuring a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 650VAC. Ideal for commercial applications, this connector has a temperature range from -30°C to 85°C and boasts durability of 50 cycles.
SM06B-GHS-TB(LF)(SN)
SM06B-GHS-TB(LF)(SN) by J S T Mfg is a 10.75" header connector with 0.049" pitch, suitable for board mounting applications. Featuring TIN finish, POLYAMIDE insulator, and PHOSPHOR BRONZE contacts, it offers 500VAC voltage withstand and operates b/w -25 to 85 °C. Ideal for signal currents up to 1A, this UL-rated connector has a polarized housing and right-angle mounting option.
DT06-6S-EP06
TE Connectivity's DT06-6S-EP06 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized connector has a total of 6 contacts and UL certification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
87831-1420
87831-1420 by Molex is a board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in applications requiring a reliable and polarized housing for rectangular PCB contact patterns.
87833-1420
Molex 87833-1420 is a 14-contact board connector with 2 rows, featuring tin finish, polyamide insulator, and phosphor bronze contacts. It operates b/w -55°C to 105°C, ideal for commercial applications requiring a reliable signal current of up to 2A. The right-angle receptacle design with locking mounting suits PCBs needing a mating contact pitch of 0.079".
87832-5622
Molex 87832-5622 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 1400VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male connectors with surface mount termination.
87831-1020
Molex 87831-1020 is a 2-row board connector with 10 contacts, rated at 2A signal current. Featuring a mating contact pitch of 0.079", it has a dielectric voltage of 1400VAC and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable connections on PCBs.
87831-0841
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Connectors: ONE;
87831-1620
Molex 87831-1620 is a 16-contact board connector with 2 rows, featuring a mating contact pitch of 0.079". With insulation resistance of 1G ohm and dielectric voltage withstand of 1400VAC, it's ideal for commercial applications requiring reliable signal current up to 2A.
87831-0641
87832-2020
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
87831-1041
87831-0820
87831-1220
Molex 87831-1220 is a 2-row, 12-contact board connector with 0.079" pitch. It features GLASS FILLED POLYAMIDE insulation, 1400VAC dielectric voltage, and -55 to 105°C operating range. Ideal for commercial applications requiring reliable signal current up to 2A in black housing with UL94V-0 rating.
87832-1422
Molex 87832-1422 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 500VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male contacts in black insulator color.
87831-0441
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
87832-1620
87832-1421
Molex 87832-1421 is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. Features include 1400VAC dielectric voltage, -55 to 105°C operating range, and matte tin over nickel finish. Ideal for PCB mounting with glass-filled polyamide insulation material.
87832-0606
87833-6520
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
87832-1020
87831-2021
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved