Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 87832-5622 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 1400VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male connectors with surface mount termination.
Median Price
$1.950
Lifecycle Status
Suppliers In-Stock
51
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$1.310
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.360
$1.330
Chip1Stop
$2.280
$1.100
$0.910
$0.887
Interstate Connecting
$2.870
Mouser Electronics
$3.150
$2.330
$1.770
$1.760
RS Americas
$3.310
$2.550
$2.250
Heilind Electronics
$3.338
DigiKey
$3.440
$2.405
Element14
$3.486
$2.507
Adafruit Industries
$4.510
$4.285
Avnet
$1.399
Sager
TTI
$1.580
Master Electronics
$1.510
Verical
$1.840
TTI Europe
$1.203
Arrow
Future Electronics
$0.675
$0.650
Newark
$1.440
Digiode
$1.425
Nova Conductors
$1.978
Freelance Electronics
$2.029
$2.131
$2.009
TME
$1.930
$1.430
$1.340
Flip Electronics
NAC Semi
Vyrian
Martec Srl
VNN
Rutronik
$0.916
$0.882
Semi Source
Chip Stock
Component Sense
IBS Electronics
$2.015
ACDS - Activité Composants Distribution Service
K-1 Technologies
ComSIT Distribution GmbH
ComSIT USA
Prism Electronics
Atlantic Semiconductor
Sensible Micro Corp
Bristol Electronics
Contempo Components LLC
North Shore Components
Next Level Components, LLC
Microfarads
Dan-Mar Components
LIBRA Elektronik GmbH
Cyclops Electronics Ltd
Speed Components Ltd
PC Components Company LLC
Semtec, LLC
Semicontronic
$1.020
$0.994
$0.989
Corphita
$1.350
Aranea Global
$1.939
$1.861
Argo Parts USA
$1.976
Continental Prestige Electronics
$2.100
$1.690
Andel Nordic
$2.950
$2.832
Advanced Electronics
CoreStaff
$7.711
$1.258
Aztec Data Supply Inc.
$8.733
Abacus Technologies
Infinite Electronics LLP (Excess)
GreenTree Electronics
Authorized Procurement Solutions
Perfect Parts
Kepictronics
Allen Electronics Distributors
$322.080
$314.992
Assy Fe
Cyclops Electronics Ltd (Excess)
Eastek
Legend Electronics Inc. (Excess)
The close contact pitch allows for efficient and reliable connection between the headers and edge connectors.
The appropriate body length provides a secure and stable connection.
High insulation resistance ensures safety and prevents electrical leakage.
The high dielectric withstanding voltage offers protection against voltage breakdown.
The finish provides durability and corrosion resistance, ensuring long-lasting performance.
The insulator material offers strength and stability to the connectors.
The high rated current allows for efficient signal transmission.
The board mounting option with peg ensures secure attachment to the PCB.
Phosphor bronze contact material offers excellent conductivity and reliability.
UL 94V-0 rating ensures high fire resistance for added safety.
Headers & Edge Type Connectors 87832-5622 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
87832-5622 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - 87832 Series Capacity Assembly Line 12/Jan/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Continental Device India
BAV99-7-F
Multicomp Pro
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Philips Components
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2-5767004-2
Tyco Electronics Amp
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 5767004; Mounting Style: STRAIGHT; Total No. of Contacts: 38;
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
1042240820
Molex 1042240820 is a PCB connector with 0.1" pitch, 500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for board mounting applications requiring a durable, polarized housing with right-angle socket style connectors.
XHP-3
J S T Mfg
XHP-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, suitable for CABLE mounting. Featuring POLYAMIDE6 insulator and UL94V-0 flammability rating, it operates b/w -25 to 85°C. With 1000VAC dielectric voltage and 3A signal current, it's ideal for applications requiring FEMALE SQ PIN-SKT contacts.
53047-0510
Molex 53047-0510 is a board connector with 5 contacts, 1.25mm terminal pitch, and 0.09" terminal length. It features polarized housing, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
823-22-020-10-001101
Mill-max Mfg
823-22-020-10-001101 by Mill-max Mfg is a board stacking connector with 20 contacts in 2 rows. It features gold over nickel termination, UL94V-0 flammability rating, and solder termination type. Ideal for applications requiring reliable male connectors with straight mounting style.
SHR-07V-S-B
SHR-07V-S-B by J S T Mfg is a 1-row loaded board connector with 7 contacts. It has a UL flammability code of 94V-0 and uses crimp termination. This connector is commonly used in cable mounting applications.
B2B-PH-K-S(LF)(SN)
B2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring high insulation resistance, POLYAMIDE66 insulator material, and TIN COPPER termination finish in a compact 0.232" x 0.177" x 0.236" body size.
B2PS-VH-R(LF)(SN)
B2PS-VH-R(LF)(SN) by J S T Mfg is a 10A BOARD CONNECTOR with 0.156" pitch, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. Ideal for PCBs with RECTANGULAR contact pattern, it offers high insulation resistance of 1Gohm and operates b/w -25 to 85°C.
78171-0003
Molex 78171-0003 is a board connector with 0.047" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications requiring a durable male plug with surface mount termination and black insulator color.
7-188275-8
TE Connectivity
TE Connectivity 7-188275-8 is a 2-row, 8-contact board connector with 0.05" pitch. With insulation resistance of 1Gohm and rated voltage of 100V, it's ideal for PCB applications. Featuring POLYAMIDE46 insulator material, this header has a temperature range from -40 to +105 °C.
66506-353LF
Amphenol Communications Solutions
Amphenol's 66506-353LF is a 2-row, 34-contact board connector with UL94V-0 flammability rating. Featuring 2.54mm terminal pitch and solder termination, it is ideal for straight mounting applications in headers & edge type connectors.
B3B-XH-A(LF)(SN)
B3B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for applications requiring a male connector with 3A signal current, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.
SHF-105-01-L-D-SM
Samtec
SHF-105-01-L-D-SM by Samtec is a 2-row board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 1.75A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
1-1761606-3
TE Connectivity 1-1761606-3 is a 2-row, 40-contact board connector with a mating contact pitch of 0.1". Featuring POLYBUTYLENE TEREPHTHALATE insulator material and rated for up to 1A signal current, it is ideal for commercial applications requiring reliable connections in temperatures ranging from -65°C to 105°C.
EHR-2
EHR-2 by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 3A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulation, operates b/w -25 to 85 °C, and UL94V-0 flammability rating. Ideal for CABLE mounting applications requiring high contact resistance and locking feature.
154763-E
TE Connectivity's 154763-E header connector features a mating contact pitch of 0.05", insulation resistance of 10^10 ohm, and dielectric voltage rating of 707VAC. Ideal for board mounting applications in electronics, this male connector with liquid crystal polymer insulator offers durability up to 500 cycles at temperatures ranging from -55°C to 125°C.
1-826656-0
TE Connectivity 1-826656-0 is a board connector with 20 contacts, rated at 5A. It features tin termination finish, PBT insulator, and phosphor bronze contact material. With UL certification and green insulator color, it is ideal for applications requiring high insulation resistance and operating temperatures from -65 to 105°C.
803-87-054-30-001101
Preci-dip Sa
803-87-054-30-001101 by Preci-dip Sa is a BOARD CONNECTOR with 54 contacts, featuring BERYLLIUM COPPER contact material and GOLD FLASH mating finish. It has a terminal pitch of 2.54mm and is designed for surface mount applications in headers & edge type connectors.
61300811121
Wuerth Elektronik & Kg
61300811121 by Wurth Elektronik is a BOARD CONNECTOR with 8 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and can withstand up to 500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 125°C on PCBs with a rectangular contact pattern.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
87831-1420
87831-1420 by Molex is a board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in applications requiring a reliable and polarized housing for rectangular PCB contact patterns.
87833-1420
Molex 87833-1420 is a 14-contact board connector with 2 rows, featuring tin finish, polyamide insulator, and phosphor bronze contacts. It operates b/w -55°C to 105°C, ideal for commercial applications requiring a reliable signal current of up to 2A. The right-angle receptacle design with locking mounting suits PCBs needing a mating contact pitch of 0.079".
87831-1020
Molex 87831-1020 is a 2-row board connector with 10 contacts, rated at 2A signal current. Featuring a mating contact pitch of 0.079", it has a dielectric voltage of 1400VAC and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable connections on PCBs.
87831-2020
The Molex 87831-2020 is a board connector with 20 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1G ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 105°C.
87831-0841
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Connectors: ONE;
87831-1620
Molex 87831-1620 is a 16-contact board connector with 2 rows, featuring a mating contact pitch of 0.079". With insulation resistance of 1G ohm and dielectric voltage withstand of 1400VAC, it's ideal for commercial applications requiring reliable signal current up to 2A.
87831-0641
87832-2020
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
87831-1041
87831-0820
87831-1220
Molex 87831-1220 is a 2-row, 12-contact board connector with 0.079" pitch. It features GLASS FILLED POLYAMIDE insulation, 1400VAC dielectric voltage, and -55 to 105°C operating range. Ideal for commercial applications requiring reliable signal current up to 2A in black housing with UL94V-0 rating.
87832-1422
Molex 87832-1422 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 500VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male contacts in black insulator color.
87831-0441
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
87832-1620
87832-1421
Molex 87832-1421 is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. Features include 1400VAC dielectric voltage, -55 to 105°C operating range, and matte tin over nickel finish. Ideal for PCB mounting with glass-filled polyamide insulation material.
87832-0606
87833-6520
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
87832-1020
87832-5722
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved