Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 87833-1420 is a 14-contact board connector with 2 rows, featuring tin finish, polyamide insulator, and phosphor bronze contacts. It operates b/w -55°C to 105°C, ideal for commercial applications requiring a reliable signal current of up to 2A. The right-angle receptacle design with locking mounting suits PCBs needing a mating contact pitch of 0.079".
Median Price
$0.995
Lifecycle Status
Suppliers In-Stock
54
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.570
100+ parts
-
1k+ parts
10k+ parts
Bürklin Elektronik
$0.670
$0.620
Arrow
$0.786
$0.888
$0.792
$0.728
Adafruit Industries
$0.894
$0.849
Sager
$0.914
$0.718
Avnet
$0.969
$0.832
Chip1Stop
$1.100
Farnell
$0.809
RS Americas
$1.920
$1.150
DigiKey
$1.930
Mouser Electronics
$2.010
$1.360
$1.210
$1.050
Element14
$2.140
$1.570
$1.310
$1.270
Newark
$2.360
$1.620
$1.480
TTI
$0.810
$0.750
Verical
$1.260
Powell Electronics
$0.830
Master Electronics
$1.220
$1.080
$1.020
Interstate Connecting
$0.788
Heilind Electronics
$0.921
$0.751
$0.850
Freelance Electronics
$0.470
Digiode
$0.636
TestEquity
$0.930
Nova Conductors
$1.032
Component Electronics Inc.
$1.540
$1.000
TME
$1.780
Bisco
$19.659
NAC Semi
$1.500
Vyrian
Jameco Electronics
EMSNET
Bristol Electronics
IBS Electronics
$1.001
Atlantic Semiconductor
R&J Components
Chip Stock
Semi Source
VNN
Prism Electronics
Resion
A&K Electronics
Rotakorn
Elcom Components
North Shore Components
ComSIT Distribution GmbH
Pegasus Components GmbH
Electronics Depot
Sensible Micro Corp
Vicor Industries, Inc.
Connector Distribution Corp
Right Parts Inc.
J & M Industries LLC
PC Components Company LLC
Sunrise Surplus Inc.
Semtec, LLC
Semicontronic
$0.556
$0.553
Corphita
$0.603
Modulus Dynamics
$0.868
Advanced Electronics
Argo Parts USA
$0.952
Continental Prestige Electronics
$1.760
$1.070
$0.891
CoreStaff
$2.495
$0.928
$0.890
Aztec Data Supply Inc.
$6.587
Andel Nordic
$7.848
$7.534
Perfect Parts
Abacus Technologies
Kepictronics
GreenTree Electronics
$1.105
Robosynatics
$0.851
$0.833
Lucentia Tech
Futuretech Components
Eastek
Netroflash
$1.011
$0.980
$0.960
Resion (Excess)
EMSNET (Excess)
Assy Fe
Speed Components Ltd (Excess)
Formix International (Excess)
The tight mating contact pitch allows for a secure and reliable connection between the headers and edge connectors.
High insulation resistance helps prevent electrical leakage and ensures the integrity of the signal transmission.
The high maximum operating temperature makes this product suitable for use in a wide range of environments and applications.
Phosphor bronze contact material is known for its high conductivity and durability, ensuring long-lasting performance.
The right-angle mounting style allows for easy and convenient installation in tight spaces or on crowded PCBs.
With a rated current of 2 A, this product can handle moderate power requirements for signal transmission.
Headers & Edge Type Connectors 87833-1420 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
87833-1420 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Changzhou Starsea Electronics
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
357-074-422-268
Edac
Edac 357-074-422-268 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40°C to +105°C. Ideal for applications requiring high reliability and durability in electronic connections.
TSW-104-07-T-S
Samtec
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
5-534998-6
TE Connectivity
TE Connectivity's 5-534998-6 board connector features insulation resistance of 5000000000 ohm, dielectric voltage of 750VAC, and tin finish with nickel barrier. With UL flammability rating of 94V-0, it is ideal for applications requiring a rated current of 2A in temperatures ranging from -65 to 125 °C.
09-50-3041
Molex
Molex 09-50-3041 is a board connector with 0.156" mating pitch, 0.62"x.25"x.625" body dimensions, and POLYAMIDE insulator material. It has 4 contacts, FEMALE gender, PLUG shell style, and CRIMP termination type for CABLE mounting applications in commercial settings.
PHR-3
J S T Mfg
PHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with POLYAMIDE66 insulator. It has 0.079" contact pitch, 800VAC dielectric voltage, and -25 to 85 °C operating temp range. Ideal for CABLE mounting, it features FEMALE contacts with 20 mohm resistance and 0.019" min insulation diameter.
B13B-PH-K-S(LF)(SN)
B13B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 1.098" length, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with 2A signal current, operating b/w -25°C to 85°C.
TSW-108-17-T-S
TSW-108-17-T-S by Samtec is a 0.1 inch pitch board connector with 8 contacts and a max operating temperature of 105°C. It features a durable design with a mating contact finish of matte tin over nickel, making it suitable for various applications in electronics and PCB assemblies.
87831-1420
87831-1420 by Molex is a board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in applications requiring a reliable and polarized housing for rectangular PCB contact patterns.
851-
Mill-max Mfg
851- by Mill-max Mfg is a BOARD CONNECTOR with 1.27mm Terminal Pitch, SOLDER Termination Type, and MALE Contact Gender. It is used in Headers & Edge Type Connectors for STRAIGHT Mounting on PCBs.
22-29-2021
Molex 22-29-2021 header connector features 0.1" pitch, 4A signal current rating, and polyamide insulation for durability. Ideal for board connections in commercial applications with UL and CSA standards compliance. Dimensions: 0.2"x.23"x.46", operating temp range of 0-75°C, and matte tin over nickel finish for reliable solder termination.
22-16-2070
The Molex 22-16-2070 is a board connector with 7 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 500000000000 ohm and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications.
5011902017
The Molex 5011902017 is a BOARD CONNECTOR with 20 contacts, gold termination finish, and 0.039" contact pitch. It has a dielectric voltage of 350VAC and operates b/w -40 to 105°C. Ideal for applications requiring durable, male connectors with surface mount termination in commercial settings.
1638190000
Weidmueller & Kg
1638190000 by Weidmueller & Kg is a BOARD CONNECTOR with 17 contacts, TIN finish, and UL 94V-0 flammability rating. It is used for CABLE mounting applications requiring FEMALE contact gender and SCREW termination in SOCKET style connectors.
103948-9
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
53398-0771
The Molex 53398-0771 header connector features a mating contact pitch of 0.049", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting with solder holding posts, this connector is designed for applications requiring a durable, polarized male connector with a total of 7 contacts.
SFW4S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW4S-2STE1LF is a 4-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
TFM-110-01-S-D-RE1-WT
Samtec TFM-110-01-S-D-RE1-WT is a 20-contact board stacking connector with 0.05" pitch, ideal for commercial applications. Features include matte tin termination, liquid crystal polymer insulator, and gold mating contact finish. With a temperature range of -55 to 125°C, it offers reliable signal transmission in various electronic devices.
14-56-4045
The Molex 14-56-4045 is a board connector with 0.1" mating contact pitch, gold termination finish, and 600VAC dielectric voltage. Ideal for commercial applications, it has a black insulator color, UL flammability rating of 94V-0, and operates b/w -40 to 120°C.
17211102101
Harting Electronics & Kg
17211102101 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts, GOLD OVER NICKEL finish, and GLASS FILLED POLYETHYLENE insulator. It has a Mating Contact Pitch of 0.079", operates b/w -55 to 125 °C, and offers durability up to 250 cycles. Ideal for applications requiring high insulation resistance and reliable signal current of 1A in commercial settings.
SHR-07V-S-B
SHR-07V-S-B by J S T Mfg is a 1-row loaded board connector with 7 contacts. It has a UL flammability code of 94V-0 and uses crimp termination. This connector is commonly used in cable mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
87832-5622
Molex 87832-5622 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 1400VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male connectors with surface mount termination.
87831-1020
Molex 87831-1020 is a 2-row board connector with 10 contacts, rated at 2A signal current. Featuring a mating contact pitch of 0.079", it has a dielectric voltage of 1400VAC and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable connections on PCBs.
87831-2020
The Molex 87831-2020 is a board connector with 20 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1G ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 105°C.
87831-0841
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Connectors: ONE;
87831-1620
Molex 87831-1620 is a 16-contact board connector with 2 rows, featuring a mating contact pitch of 0.079". With insulation resistance of 1G ohm and dielectric voltage withstand of 1400VAC, it's ideal for commercial applications requiring reliable signal current up to 2A.
87831-0641
87832-2020
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
87831-1041
87831-0820
87831-1220
Molex 87831-1220 is a 2-row, 12-contact board connector with 0.079" pitch. It features GLASS FILLED POLYAMIDE insulation, 1400VAC dielectric voltage, and -55 to 105°C operating range. Ideal for commercial applications requiring reliable signal current up to 2A in black housing with UL94V-0 rating.
87832-1422
Molex 87832-1422 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 500VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male contacts in black insulator color.
87831-0441
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
87832-1620
87832-1421
Molex 87832-1421 is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. Features include 1400VAC dielectric voltage, -55 to 105°C operating range, and matte tin over nickel finish. Ideal for PCB mounting with glass-filled polyamide insulation material.
87832-0606
87833-6520
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
87832-1020
87833-1436
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; No. of PCB Rows: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved