Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73391-0260 is an RF SMA connector with gold/nickel finish, PTFE insulator, and brass shell. It is a jack type connector for RG-316 cable termination in right-angle mounting applications. Suitable for commercial use, it offers reliable performance with locking feature for secure connections.
Median Price
$5.135
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Verical
1+ parts
$3.800
100+ parts
-
1k+ parts
$3.230
10k+ parts
Chip1Stop
$5.150
$3.840
Mouser Electronics
$5.360
$4.090
$3.110
$2.900
Element14
$7.480
$6.140
$5.900
DigiKey
$8.050
$5.700
$4.694
Newark
$5.120
$5.060
Powell Electronics
$3.570
$3.040
$2.670
Master Electronics
$3.580
$3.050
$2.430
Nova Conductors
$2.989
Digiode
$3.914
VNN
IBS Electronics
$3.521
$3.000
$2.393
Vyrian
TME
$5.110
$3.920
Bristol Electronics
Atlantic Semiconductor
Inventory MP
Andel Nordic
$2.011
$1.930
Bastille Electronics
$2.840
$2.698
$2.660
Continental Prestige Electronics
$2.930
Argo Parts USA
Corphita
$3.708
Aztec Data Supply Inc.
$7.477
CoreStaff
$10.252
$3.958
Assy Fe
Kepictronics
Panel mount feature allows for secure and stable connection, making it suitable for applications where the connector needs to be attached to a panel or enclosure.
Gold/nickel finish on termination contacts provides good conductivity and corrosion resistance, ensuring reliable signal transmission and longevity of the connector.
Compact body depth makes this connector suitable for applications with space constraints without compromising on performance.
PTFE insulator material offers high electrical insulation properties and can withstand high temperatures, making the connector reliable and durable.
Gold shell finish provides enhanced durability and conductivity, reducing the risk of signal loss or interference.
RF SMA connector type is suitable for high-frequency applications, ensuring efficient signal transmission.
Versatile mounting options allow for flexibility in installation, catering to different design requirements.
Brass shell material offers robust construction and good electromagnetic shielding properties, ensuring signal integrity.
Compatibility with RG-316 cable type ensures seamless integration with existing setups or specific cable requirements.
Crimp termination type offers easy and reliable connection, reducing the risk of signal loss due to poor connections.
Jack body or shell style is commonly used and provides a secure connection, making it a reliable choice.
Right-angle mounting style enables connections in tight spaces or where cable routing needs to be directed in a specific direction.
Coax contact style ensures efficient transmission of RF signals with minimal interference.
Locking mounting option offers secure and stable connection, ideal for applications where vibration or movement may be present.
Commercial reliability ensures consistent performance under standard operating conditions, making it suitable for a wide range of applications.
SSMA Connectors 73391-0260 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body Depth:
Body or Shell Style:
Cable Types:
Connector Type:
Termination Contact Finish:
Contact Style:
Insulator Material:
JESD-609 Code:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
73391-0260 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
PCN Assembly/Origin - Multiple Devices Move 10/Jan/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Daco Semiconductor
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Semiconductor
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Semtech Electronics
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
R125.326.000
Radiall S A
R125.326.000 by Radiall S A is a RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and can withstand temperatures from -65 to 105 °C.
2831-7388-02
TE Connectivity
TE Connectivity's 2831-7388-02 SSMA Connector features 0.21 dB insertion loss, gold termination with nickel barrier, and threaded coupling. With a max operating frequency of 12.4 GHz, it is ideal for RF applications requiring a 50 ohm characteristic impedance and male plug connector on cables.
142-0711-821
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Mounting Style: STRAIGHT; Filter Feature: NO;
M39012/57-3029
Sv Microwave
RF SMA CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE;
132147
Amphenol
Amphenol 132147 is an RF SMA connector with threaded coupling, gold finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for panel mount applications requiring reliable signal transmission in electronic devices.
142-0701-801
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1;
16SMA-50-2-100/199NH
Huber+suhner Ag
16SMA-50-2-100/199NH by Huber+suhner Ag is an RF SMA connector with a threaded coupling type. It has an insertion loss of 0.5 dB and operates at frequencies up to 26.5 GHz. Ideal for commercial applications requiring a durable, right-angle plug with a characteristic impedance of 50 ohm.
132106
Amphenol 132106 is an RF SMA Connector with threaded coupling, gold finish, and 50 ohm impedance. Featuring 0.14 dB insertion loss and 1.14 VSWR, it operates up to 18 GHz. Ideal for panel mount applications requiring high-frequency signal transmission with low loss and impedance matching.
M39012/55-3026
Delta Electronics Manufacturing
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Termination Type: CRIMP; IEC Conformity: NO;
142-0701-201
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Manufacturer Series: SMA; Panel Mount: NO;
142-9701-201
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: BOARD; Maximum Operating Frequency: 18 GHz;
CONREVSMA013.062
Linx Technologies
RF SMA CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
M39012/55-4502
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Filter Feature: NO; Mounting Type: CABLE;
R125236000
R125236000 by Radiall S A is an RF SMA connector with a threaded coupling type and gold termination contact finish. Featuring a low insertion loss of 0.21 dB, it operates at up to 12.4 GHz frequency, making it ideal for high-frequency applications requiring a characteristic impedance of 50 ohms. The connector's hermetic option and female contact gender offer versatility in various cable mounting configurations.
5352
Carlisle Interconnect Technologies
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Depth: .51 inch; Body or Shell Style: PLUG; Shell Material: STAINLESS STEEL;
1051156-1
TE Connectivity's 1051156-1 SSMA Connector features 0.675" body length, 0.17 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 12 GHz with RG 405 cable type, it has a threaded coupling type and TFE insulator material.
M39012/55-4007
Amphenol's M39012/55-4007 SSMA Connector features 0.11 dB insertion loss, threaded coupling, and PTFE insulator. Ideal for RF applications up to 12.4 GHz, with 50 ohm impedance and male plug design for cable mounting using clamp solder termination.
5032
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; JESD-609 Code: e4; Mating Contact Finish: GOLD (50); Panel Mount: YES; Termination Contact Finish: GOLD (50);
142-0694-101
Bel Fuse
Bel Fuse's 142-0694-101 is an RF SMA connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and can withstand temperatures ranging from -65 to 165 °C. This panel-mounted connector, made of brass, is commonly used in commercial applications requiring reliable and durable connections for RG-402 cables.
16_SMA-50-1-1/111_NE
16_SMA-50-1-1/111_NE by Huber+suhner Ag is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-196A/U cables. It features gold-over-nickel mating contact finish, brass shell material, and can operate b/w -65 to 165 °C. Ideal for commercial applications requiring durability with 500 cycles and a max frequency of 18 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73391-0060
Molex
Molex 73391-0060 SSMA Connector features 0.156 dB Insertion Loss, 1.31 VSWR, and 27 GHz Max Frequency. Ideal for RF applications requiring a 50 ohm characteristic impedance with female solder termination on boards.
73391-0320
Molex 73391-0320 is an RF SMA connector with gold/nickel termination, threaded coupling, and PTFE insulator. Ideal for board mounting in commercial applications, featuring a 50 ohm impedance and male contact gender. Suitable for right-angle installations with locking mounting option.
73391-0070
Molex 73391-0070 RF SMA Connector has 5000000000 ohm Insulation Resistance, 0.04 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications requiring a durable SSMA Connector with POLYTETRAFLUOROETHYLENE insulator material, GOLD shell finish, and FEMALE contact gender.
73391-0083
The Molex 73391-0083 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
73391-0080
The Molex 73391-0080 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
73391-1080
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Option-1: LOCKING; Total No. of Contacts: 1;
73391-1081
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Material: BRASS; Terminal Length: .11 inch; Body Width: .411 inch;
73391-0261
RF SMA CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Cable Types: RG-316; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE;
73391-0262
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: JACK; Contact Style: COAX; Mounting Style: RIGHT ANGLE; Termination Type: CRIMP;
73391-0263
RF SMA CONNECTOR; Reliability: COMMERCIAL; Mounting Option-1: LOCKING; Contact Style: COAX; Cable Types: RG-316; Shell Material: BRASS;
73391-0264
RF SMA CONNECTOR; Reliability: COMMERCIAL; Mounting Style: RIGHT ANGLE; Shell Finish: GOLD; Total No. of Contacts: 1; Body or Shell Style: JACK;
73391-0230
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: GOLD; Contact Style: COAX; Total No. of Contacts: 1;
73391-0081
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved