Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73391-0230 is a RF SMA connector with gold shell finish, suitable for RG-316 cable termination. Featuring 50 ohm impedance and PTFE insulator, it's ideal for commercial applications requiring reliable right-angle mounting.
Median Price
$5.607
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Verical
1+ parts
$3.790
100+ parts
-
1k+ parts
$3.640
10k+ parts
Master Electronics
$4.994
$4.140
$3.690
$3.430
TTI
$5.420
$4.210
$4.050
$3.510
Mouser Electronics
$5.460
$4.510
$3.840
Distrelec
$5.754
$5.314
Newark
$5.840
$4.500
$4.310
RS Americas
$6.170
$4.750
$4.200
Element14
$6.436
$5.508
$5.089
Farnell
$6.971
$5.344
$5.177
Chip1Stop
$4.980
$4.780
Nova Conductors
$3.639
Digiode
$4.009
TME
$7.120
$5.660
Vyrian
VNN
IBS Electronics
$3.899
$3.745
$3.128
Elcom Components
Sunrise Surplus Inc.
Netroflash
$3.457
$3.384
Corphita
$3.798
Andel Nordic
$8.427
$8.090
Kepictronics
The compact body depth allows for easy installation and a space-saving design.
Polytetrafluoroethylene is known for its high dielectric strength and low friction, making it ideal for maintaining signal integrity and reducing signal loss.
The gold shell finish provides excellent corrosion resistance and ensures reliable electrical conductivity.
The RF SMA connector is a standard in the industry, offering a reliable and widely compatible connection for various applications.
The cable mounting type allows for easy integration into existing setups and provides flexibility in installation.
With a characteristic impedance of 50 ohm, this connector is optimized for efficient signal transmission and minimal signal loss.
Brass is a durable and reliable material for the shell, ensuring long-lasting performance and secure connections.
Compatible with RG-316 cable types, offering a high-quality and reliable connection for various RF applications.
The crimp termination type offers a secure and robust connection, minimizing signal loss and ensuring a stable transmission.
The male contact gender allows for easy and secure connections with female connectors, providing a reliable link in the system.
The plug style offers a convenient and secure connection, suitable for applications where frequent connecting and disconnecting are required.
The right-angle mounting style allows for flexible installation in tight spaces and ensures a secure connection.
The coaxial contact style provides efficient signal transmission and reduces electromagnetic interference for a clean and reliable signal.
The locking mounting option ensures a secure and stable connection, preventing accidental disconnections or signal interruptions.
Designed for commercial use, this connector offers consistent performance and reliability for various applications and environments.
SSMA Connectors 73391-0230 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body Depth:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
73391-0230 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Hitano Enterprise
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
901-10011
Amphenol
Amphenol 901-10011 SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP SOLDER termination. Suitable for cable mounting with MALE contact gender in a PLUG body style.
142-0711-821
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Option-1: LOCKING;
142-0761-881
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Termination Contact Finish: GOLD; Mounting Style: STRAIGHT;
M39012/56-3030
Winchester Interconnect
M39012/56-3030 by Winchester Interconnect is a SSMA connector with a body length of 0.7" and depth of 1.04". It has a snap coupling type and is made of stainless steel. This RF SMA connector operates at a max frequency of 12.4 GHz and is commonly used in cable applications for its crimp termination and 50 ohm characteristic impedance.
R125236000
Radiall S A
R125236000 by Radiall S A is an RF SMA connector with a threaded coupling type and gold termination contact finish. Featuring a low insertion loss of 0.21 dB, it operates at up to 12.4 GHz frequency, making it ideal for high-frequency applications requiring a characteristic impedance of 50 ohms. The connector's hermetic option and female contact gender offer versatility in various cable mounting configurations.
SF2911-60172
Sv Microwave
RF SMA/SSMA Connectors;
TC-400-SM-X
Infinite Electronics International
TC-400-SM-X by Infinite Electronics International is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. It operates up to 6 GHz frequency, suitable for cable mounting in high-frequency applications requiring low VSWR. The connector features male contact gender and crimp solder termination for reliable signal transmission.
M39012/80-3107
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mating Contact Finish: NOT SPECIFIED; Additional Features: STANDARD: MIL-C-39012;
32S102-271L5
Rosenberger Hochfrequenztechnik & Kg
32S102-271L5 by Rosenberger is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.17 dB. It features gold termination contact finish, PTFE insulator material, and can operate b/w -65 to 165 °C. Ideal for applications requiring high durability, low VSWR, and reliable performance up to 18 GHz in commercial settings.
1115.42.2510.001
Ims Connector Systems
1115.42.2510.001 by Ims Connector Systems is an RF SMA connector with a characteristic impedance of 50 ohm and gold termination contact finish. It has a durability of 500 cycles, insulation resistance of 10^10 ohm, and operates b/w -55 to 125 °C. Ideal for board mounting applications requiring threaded coupling type connectors.
142-1701-616
Ef Johnson
RF SMA CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Maximum Operating Frequency: 26.5 GHz; MIL Conformity: NO; Panel Mount: YES;
901-9511-12SF
Amphenol 901-9511-12SF SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz, with POLYTETRAFLUOROETHYLENE insulator material and 50 ohm impedance. Suitable for cable mounting with CRIMP SOLDER termination type.
1052523-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE; Maximum Operating Frequency: 18 GHz;
901-9531-1
Amphenol 901-9531-1 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.11 dB Insertion Loss, and GOLD Termination Contact Finish. Ideal for RF applications with a max frequency of 12.4 GHz, this connector is durable with 500 cycles and operates b/w -65 to 165 °C.
R124426123W
R124426123W by Radiall S A is an RF SMA connector with gold termination finish, threaded coupling, and PTFE insulator. It has a characteristic impedance of 50 ohm and operates up to 12.4 GHz. Ideal for board mounting applications requiring high-frequency signal transmission.
R125.464.270W
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
R125.153.002
R125.153.002 by Radiall S A is an SSMA Connector with 5000000000 ohm Insulation Resistance, 0.18 dB Insertion Loss, and 750VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 12.4 GHz, this connector features a GOLD shell finish, POLYTETRAFLUOROETHYLENE insulator material, and RIGHT ANGLE mounting style.
M39012/83B3004
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Termination Contact Finish: GOLD; Mounting Style: STRAIGHT;
142-0711-201
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Mating Contact Finish: GOLD (30); Coupling Type: THREADED;
M39012/55-3028
TE Connectivity
TE Connectivity's M39012/55-3028 SSMA Connector has 5000000000 ohm Insulation Resistance, 0.06 dB Insertion Loss, and 1.15 Voltage Standing Wave Ratio. Ideal for RF applications up to 12.4 GHz with MIL-C-39012 reliability standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73391-0060
Molex
Molex 73391-0060 SSMA Connector features 0.156 dB Insertion Loss, 1.31 VSWR, and 27 GHz Max Frequency. Ideal for RF applications requiring a 50 ohm characteristic impedance with female solder termination on boards.
73391-0070
Molex 73391-0070 RF SMA Connector has 5000000000 ohm Insulation Resistance, 0.04 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications requiring a durable SSMA Connector with POLYTETRAFLUOROETHYLENE insulator material, GOLD shell finish, and FEMALE contact gender.
73391-0320
Molex 73391-0320 is an RF SMA connector with gold/nickel termination, threaded coupling, and PTFE insulator. Ideal for board mounting in commercial applications, featuring a 50 ohm impedance and male contact gender. Suitable for right-angle installations with locking mounting option.
73391-0083
The Molex 73391-0083 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
73391-0080
The Molex 73391-0080 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
73391-0260
Molex 73391-0260 is an RF SMA connector with gold/nickel finish, PTFE insulator, and brass shell. It is a jack type connector for RG-316 cable termination in right-angle mounting applications. Suitable for commercial use, it offers reliable performance with locking feature for secure connections.
73391-1080
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Option-1: LOCKING; Total No. of Contacts: 1;
73391-1081
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Material: BRASS; Terminal Length: .11 inch; Body Width: .411 inch;
73391-0261
RF SMA CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Cable Types: RG-316; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE;
73391-0262
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: JACK; Contact Style: COAX; Mounting Style: RIGHT ANGLE; Termination Type: CRIMP;
73391-0263
RF SMA CONNECTOR; Reliability: COMMERCIAL; Mounting Option-1: LOCKING; Contact Style: COAX; Cable Types: RG-316; Shell Material: BRASS;
73391-0264
RF SMA CONNECTOR; Reliability: COMMERCIAL; Mounting Style: RIGHT ANGLE; Shell Finish: GOLD; Total No. of Contacts: 1; Body or Shell Style: JACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved