Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Body or Shell Style: JACK; Contact Style: COAX;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$9.161
$8.795
Corphita
SSMA Connectors 73251-1152 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insertion Loss:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73251-1152 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Pro-an Electronic
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Daco Semiconductor
EU2B-YS3103F
Idec
ROTARY SWITCH;
142-0701-871
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: GOLD; JESD-609 Code: e4;
73251-1150
Molex
Molex 73251-1150 is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.04 dB insertion loss. Ideal for RF applications up to 18 GHz, featuring gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and 1.06 VSWR.
901-9511-1SF
Amphenol
Amphenol 901-9511-1SF is an RF SMA connector with 0.11 dB insertion loss, 1.29 VSWR, and 12.4 GHz max operating frequency. It features gold termination contact finish, threaded coupling type, and PTFE insulator material. Ideal for applications requiring a 50 ohm characteristic impedance such as cable mounting with crimp solder termination.
SF2921-61345
Sv Microwave
SF2921-61345 by Sv Microwave is an RF SMA Connector with 0.16 dB Insertion Loss, 1.17 VSWR, and 27 GHz Max Operating Frequency. Ideal for applications requiring a 50 ohm characteristic impedance, it features gold contact finish and threaded coupling for secure connections in high-frequency environments.
132198
Amphenol 132198 is an RF SMA Connector with 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for applications requiring a 50 ohm Characteristic Impedance, it supports frequencies up to 12.4 GHz and features FEMALE Contact Gender with Panel Mount capability.
142-0701-201
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Body Depth: .375 inch; Body Diameter: .312 inch;
142-0701-491
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Insulator Material: POLYTETRAFLUOROETHYLENE; Manufacturer Series: SMA;
R125.462.001W
Radiall S A
R125.462.001W by Radiall S A is an RF SMA connector with a 50 ohm impedance, 0.05 dB insertion loss, and 1.04 VSWR. Ideal for panel mounting in applications requiring high durability, it features a gold shell finish, PTFE insulator material, and can operate b/w -65 to 165°C temperatures at up to 18 GHz frequency.
110-900-0631N
Winchester Interconnect
RF SMA CONNECTOR; Manufacturer Series: 110-900-0631N;
142-0403-011
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Ports: 1;
132119
Amphenol 132119 is an RF SMA connector with threaded coupling, 0.14 dB insertion loss, and 1.4 VSWR. Ideal for panel mount applications up to 12.4 GHz frequency range, featuring a 50 ohm impedance and crimp solder termination for female contacts.
R125153000
The Radiall S A R125153000 SSMA Connector features 0.25 dB insertion loss, gold termination contact finish, and threaded coupling type. Ideal for RF applications up to 12.4 GHz with a 50 ohm characteristic impedance, this male plug connector is suitable for cable mounting in right-angle configurations.
132280RP
The Amphenol 132280RP is an RF SMA connector with a threaded coupling type, gold shell finish, and PTFE insulator material. It is used in commercial applications with RG-58C/U cable types for reliable signal transmission. The connector features a male contact gender, crimp termination type, and straight mounting style for secure connections.
R125154002
Radiall S A R125154002 SSMA Connector features 0.09 dB Insertion Loss, 1.1 VSWR, and 18 GHz Max Operating Frequency. Ideal for RF applications requiring 50 ohm impedance, with GOLD/NICKEL termination for low signal loss in high-frequency environments. Suitable for cable mounting with RIGHT ANGLE plug style.
1045630-1
TE Connectivity's 1045630-1 is an RF SSMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for commercial applications up to 38 GHz, it features a stainless steel shell, solder termination, and operates b/w -65°C to 125°C.
PSF-S01-007
Gigalane
PSF-S01-007 by Gigalane is an RF SMA Connector with 50 ohm impedance, suitable for applications up to 26.5 GHz. Featuring gold over nickel termination finish, it offers high durability with 500 cycles and insulation resistance of 5000000000 ohm. This panel mount connector has a threaded coupling type and can operate in temperatures ranging from -40 to 125 °C.
901-9602-1SF
Amphenol 901-9602-1SF is an RF SMA connector with 0.11 dB insertion loss, 1.29 VSWR, and 12.4 GHz max operating frequency. It features threaded coupling, gold termination finish, and PTFE insulator for high-frequency applications in cable connections.
HRM-200-088BPJBN(40)
Hirose Electric
RF SMA CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
73100-0115
The Molex 73100-0115 SSMA Connector features 0.156 dB insertion loss, 1.31 VSWR, and 27 GHz max operating frequency. Ideal for RF applications requiring a threaded coupling type, with gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use in board-mounted systems needing a 50 ohm characteristic impedance.
142-0701-841
Bel Fuse
The Bel Fuse 142-0701-841 SSMA Connector features a body length of 0.375", dielectric voltage of 1400VAC, and operating temperature range from -65 to 165°C. Ideal for RF applications, this female connector with 50 ohm impedance is designed for board mounting in commercial settings with durability up to 500 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved