Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Contact Gender: MALE; JESD-609 Code: e4; Manufacturer Series: SMA; Filter Feature: NO; Termination Contact Finish: GOLD (50);
Median Price
$8.965
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$7.930
1k+ parts
10k+ parts
Verical
$10.000
Rapid Electronics
$11.021
Nova Conductors
$42.990
VNN
ZD Integrated Circuits Inc.
Vyrian
IBS Electronics
$11.181
Electro Sonic
$8.170
AZTECH Wire
$8.933
Continental Prestige Electronics
$42.130
Netroflash
Argo Parts USA
SSMA Connectors 5205-2 attributes and parameters. Explore more SSMA Connectors devices from Connecting Devices
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Panel Mount:
5205-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Microsemi
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LL4148
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
11_SMA-50-2-29/119_NH
Huber+suhner Ag
11_SMA-50-2-29/119_NH by Huber+suhner Ag is a RF SMA connector with gold/nickel finish, suitable for commercial applications. Featuring threaded coupling, it has a durability of 500 cycles and operates at temperatures ranging from -65 to 165°C. With a max frequency of 18 GHz and impedance of 50 ohm, it is ideal for high-frequency cable connections.
63012242124506
Wuerth Elektronik & Kg
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1051855-1
TE Connectivity's 1051855-1 SSMA Connector features TFE insulator, 50 ohm impedance, and 12 GHz frequency. Ideal for RF applications, it has a threaded coupling type and operates b/w -65 to 125°C. Compatible with RG cables, this connector is known for its low VSWR of 1.16.
EZ-240-SM-X
L-com
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: BRASS; Panel Mount: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
M39012/80B3101
TE Connectivity's M39012/80B3101 is a threaded RF SMA connector with a body length of 0.68 inch and depth of 0.666 inch. It has an insulation resistance of 5G ohm, operates at temperatures ranging from -65 to 165 °C, and is commonly used in MIL-C-39012 applications.
23_SMA-50-0-13/111_NH
23_SMA-50-0-13/111_NH by Huber+suhner Ag is a SSMA Connector with threaded coupling, gold shell finish, and 50 ohm impedance. It has a max operating frequency of 18 GHz and is suitable for commercial applications requiring RF SMA connectors with durability up to 500 cycles.
142-0771-821
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; Mating Contact Finish: GOLD;
73251-2300
Molex
Molex 73251-2300 is a RF SMA CONNECTOR with 50 ohm impedance, ideal for BOARD mounting. Featuring JACK body style, it offers SOLDER termination and COAX contact style. Commonly used in commercial applications requiring reliable LOCKING mounting option.
132281
Amphenol
Amphenol 132281 is an RF SMA Connector with 50 ohm impedance, 0.14 dB insertion loss, and gold termination. Ideal for panel mounting, it operates at up to 12.4 GHz frequency and conforms to MIL standards. Suitable for threaded coupling in applications requiring reliable signal transmission.
142-0711-821
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mounting Style: STRAIGHT; Coupling Type: THREADED;
1051114-1
TE Connectivity's 1051114-1 is an RF SMA connector with a threaded coupling type, TFE insulator, and gold shell finish. With a 50 ohm impedance, it operates b/w -65 to 165 °C and supports RG 405 cable types. Ideal for commercial applications up to 18 GHz due to its low insertion loss of 0.21 dB.
M39012/79B3102
TE Connectivity's M39012/79B3102 is an SSMA connector with 50 ohm impedance, 0.03 dB insertion loss, and 1.05 VSWR. Ideal for RF applications up to 18 GHz, it features a threaded coupling type and PTFE insulator material. MIL-C-39012 compliant, it operates b/w -65°C to 165°C with gold finish on stainless steel shell for high reliability in solder termination setups.
142-1711-026
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
901-9511-3SFC
Amphenol 901-9511-3SFC is an RF SMA connector with 0.11 dB insertion loss, 1.51 VSWR, and 12.4 GHz max operating frequency. It features gold termination finish, threaded coupling, and PTFE insulator material. Ideal for applications requiring a 50 ohm impedance cable connection with male plug and crimp termination.
1051113-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD; MIL Conformity: NO;
5972-3CC
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5972-3CC is an RF SMA connector with a 0.31" body depth, gold shell finish, and PTFE insulator. It features a polarized housing, stainless steel shell material, and female contact gender for commercial reliability. Ideal for straight mounting applications requiring a coaxial connection with locking option.
2052-3123-00
TE Connectivity 2052-3123-00 is an RF SMA connector with gold finish, 50 ohm impedance, and 18 GHz operating frequency. It is used in commercial applications for high-frequency signal transmission due to its low insertion loss of 0.17 dB and high insulation resistance of 5 Gohm.
32K101-400L5
Rosenberger Hochfrequenztechnik & Kg
32K101-400L5 by Rosenberger is an RF SMA connector with 0.17 dB insertion loss, 5000000000 ohm insulation resistance, and 1.3 VSWR. It is used in applications requiring a durable, threaded coupling type connector for up to 18 GHz frequency operations.
1052963-1
TE Connectivity's 1052963-1 is an SSMA connector with a threaded coupling type and panel mount capability. It features a polytetrafluoroethylene insulator material, beryllium copper contact material, and a gold mating contact finish. This RF SMA connector is commonly used in applications with a max operating frequency of 12.4 GHz.
5691
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; Coupling Type: THREADED; Mounting Style: STRAIGHT; IEC Conformity: NO; MIL Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5205-2
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Shell Finish: GOLD; Total No. of Contacts: 1;
5205-1CCSF
RF SMA CONNECTOR; Contact Gender: MALE; Coupling Type: THREADED; Manufacturer Series: SMA; Mating Contact Finish: GOLD (50); MIL Conformity: NO;
5205-1CC
RF SMA CONNECTOR; Contact Gender: MALE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; JESD-609 Code: e4; Filter Feature: NO;
5205-1
RF SMA CONNECTOR; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: GOLD (50); IEC Conformity: NO; MIL Conformity: NO;
5205-2CCSF
RF SMA CONNECTOR; Contact Gender: MALE; Manufacturer Series: SMA; Filter Feature: NO; DIN Conformance: NO; Mounting Style: STRAIGHT;
5205-2CC
RF SMA CONNECTOR; Contact Gender: MALE; Additional Features: CAPTIVE CONTACT; IEC Conformity: NO; Coupling Type: THREADED; DIN Conformance: NO;
5205-3CCSF
RF SMA CONNECTOR; Contact Gender: MALE; MIL Conformity: NO; JESD-609 Code: e4; Mounting Style: STRAIGHT; Coupling Type: THREADED;
5205-3CC
RF SMA CONNECTOR; Contact Gender: MALE; Filter Feature: NO; Coupling Type: THREADED; MIL Conformity: NO; DIN Conformance: NO;
5205-3
RF SMA CONNECTOR; Contact Gender: MALE; MIL Conformity: NO; Termination Contact Finish: GOLD (50); Panel Mount: YES; Coupling Type: THREADED;
5205-4CCSF
RF SMA CONNECTOR; Contact Gender: MALE; Mating Contact Finish: GOLD (50); DIN Conformance: NO; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
5205-4CC
RF SMA CONNECTOR; Contact Gender: MALE; Manufacturer Series: SMA; Termination Contact Finish: GOLD (50); Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm;
5205-4
RF SMA CONNECTOR; Contact Gender: MALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Coupling Type: THREADED; Termination Contact Finish: GOLD (50);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved