Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 70543-0007 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin over nickel finish, it offers high durability with 50 cycles and operates b/w -40°C to 105°C. Ideal for commercial use, this connector has UL94V-0 flammability rating and glass-filled polyester insulation material.
Median Price
$0.895
Lifecycle Status
Suppliers In-Stock
56
In-Stock Inventory
1k+
Sager
1+ parts
$0.773
100+ parts
$0.607
1k+ parts
-
10k+ parts
Arrow
$0.819
$0.747
$0.692
$0.652
Chip1Stop
Avnet
$0.866
$0.743
Electroshield
$0.880
Verical
$0.910
$0.890
$0.850
Misumi USA
$0.960
Farnell
$0.983
$0.700
$0.674
RS Americas
$1.420
$1.130
$1.000
RS (Exports)
$1.480
Element14
$1.504
$0.946
$0.916
Mouser Electronics
$1.670
$1.340
$1.100
$1.010
DigiKey
$1.900
Newark
$2.100
$1.510
$1.350
$1.270
Adafruit Industries
$5.590
$5.310
TTI
$0.760
$0.710
Heilind Electronics
$0.801
$0.653
$0.634
NEP Electronics
$0.735
$0.662
Master Electronics
$1.790
$1.360
$1.300
Powell Electronics
$0.790
PEI Genesis
Distrelec
TTI Europe
$0.762
$0.694
Interstate Connecting
$0.843
$0.707
$0.668
Freelance Electronics
$0.429
Digiode
$0.627
DF Sales Co.
$0.741
Nova Conductors
$0.920
Voyager Components
$1.079
TME
$1.500
$1.290
Component Electronics Inc.
$2.310
$1.730
Vyrian
Jameco Electronics
IBS Electronics
$1.029
$1.001
$0.959
NAC Semi
$1.720
$1.590
VNN
Prism Electronics
Semi Source
Semtec, LLC
Bisco
$0.889
Electronic Expediters
Powertech Controls
SPM Sales
Inventory MP
Mil-Aero Solutions, Inc.
A2Z Electronics, Inc.
Bristol Electronics
Resion
EPE Components Inc.
PC Components Company LLC
Connector Distribution Corp
Right Parts Inc.
EMSNET
Sogenti Electronics
Sensible Micro Corp
Semicontronic
$0.560
$0.546
$0.543
Corphita
$0.594
Argo Parts USA
$0.799
Netroflash
Continental Prestige Electronics
$1.680
$1.040
$0.818
Aztec Data Supply Inc.
$1.896
Andel Nordic
$2.233
$2.144
Modulus Dynamics
$4.111
Advanced Electronics
EMSNET (Excess)
Kepictronics
Cyclops Electronics Ltd (Excess)
Assy Fe
GreenTree Electronics
Eastek
Authorized Procurement Solutions
Abacus Technologies
Perfect Parts
Closer contact pitch allows for higher density of connections on the board, making this product suitable for compact designs.
High insulation resistance ensures reliable and safe operation, making it an ideal choice for critical applications.
The high dielectric voltage withstand capability makes this product suitable for use in high voltage applications, ensuring safety and reliability.
Phosphor bronze contact material provides good conductivity and durability, ensuring long-term performance and reliability of the connection.
Board mounting type allows for easy integration into circuit boards, providing a secure and stable connection.
Supports a high current rating, making it suitable for use in applications where higher power transmission is required.
Headers & Edge Type Connectors 70543-0007 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
70543-0007 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Multiple Devices Raw Material Manufacturing 11/Nov/2014
PCN Assembly/Origin - Mult Devs Additional Resin Source 18/May/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LL4148
Rfe International
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Taitron Components
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
XHP-11
J S T Mfg
XHP-11 by J S T Mfg is a BOARD CONNECTOR with 11 contacts, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting with CRIMP termination. Ideal for applications requiring reliable edge type connectors in electronic assemblies.
5-146281-2
TE Connectivity
TE Connectivity 5-146281-2 is a board connector with mating contact pitch of 0.1". Featuring matte tin finish, it has insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this male connector has a rated current of 3A and UL flammability rating of 94V-0.
1565917-4
TE Connectivity 1565917-4 is a Card Edge Connector with 200 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", suitable for board mounting with right-angle style. Operating temperature ranges from -55 to 85°C, making it ideal for various electronic applications.
BM03B-SRSS-TB(LF)(SN)(P)
BM03B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.039" pitch, 0.197" body length, and 100000000 ohm insulation resistance. It operates b/w -25 to 85 °C, has a dielectric voltage of 500VAC, and features POLARIZED HOUSING for applications requiring high signal current in PCB mounting setups.
FTSH-110-01-L-DV-K
Samtec
The Samtec FTSH-110-01-L-DV-K is a 2-row board connector with a mating contact pitch of 0.05 inches. It has a body length of 0.5 inches and can operate at temperatures ranging from -55 to 125°C. This connector is commonly used in commercial applications requiring reliable surface mount connections.
22-01-2047
The Molex 22-01-2047 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 4A rated current, it has a durable design with removable contact blocks and white insulator color. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
FTSH-107-01-L-DV-K-P-TR
Samtec FTSH-107-01-L-DV-K-P-TR is a 14-contact board connector with 0.05" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, phosphor bronze contact material, and gold mating finish over nickel. With a temperature range of -55 to 125°C, it offers reliable signal current up to 3.3A.
5103309-1
TE Connectivity's 5103309-1 header connector features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operating temperatures from -65 to 105°C. Ideal for board connections in commercial applications requiring a male plug with solder termination and UL flammability rating of 94V-0.
DF11-10DS-2C
Hirose Electric
The Hirose Electric DF11-10DS-2C is a 10-contact, 2-row board connector with a mating contact pitch of 0.079". Featuring a dielectric voltage of 650VAC and insulation resistance of 1Gohm, it's ideal for commercial applications requiring a durable, female socket-style connector with crimp termination and black insulator color.
1-2103124-1
TE Connectivity 1-2103124-1 is a BOARD CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 2 contacts, S0P2 arrangement, and operates b/w -40 to 140°C. Ideal for commercial applications requiring a MALE connector with BLADE PIN-SKT style in a RECEPTACLE shell.
SHR-09V-S-B
SHR-09V-S-B by J S T Mfg is a 9-contact BOARD CONNECTOR with 0.039" pitch, 1A signal current rating, and 500VAC dielectric voltage. Ideal for CABLE mounting in applications requiring FEMALE contacts with POLYBUTYLENE TEREPHTHALATE insulation and UL94V-0 flammability rating.
B2B-PH-SM4-TB(LF)(SN)
B2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, POLYAMIDE6T insulator, and -25 to 85°C operating range. It has 2 contacts for surface mount applications on PCBs.
1-1658621-1
TE Connectivity 1-1658621-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it has a durable design for up to 75 cycles. Ideal for cable mounting applications, this connector operates b/w -65°C to 105°C temperature range.
DF40HC(3.0)-100DS-0.4V(51)
DF40HC(3.0)-100DS-0.4V(51) by Hirose Electric is a 2-row stacking connector with 100 contacts, gold-plated for durability and signal current up to 0.3A. Featuring liquid crystal polymer insulation, it offers high dielectric voltage of 100VAC and operates b/w -35°C to 85°C. Ideal for board mounting applications requiring reliable female connectors with bellowed contact style and locking option.
NSHR-03V-S
NSHR-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with TIN finish, ideal for CABLE mounting. Made of COPPER ALLOY, it has UL 94V-0 flammability rating and features FEMALE contacts suitable for CRIMP termination.
DF1E-6S-2.5C
The Hirose Electric DF1E-6S-2.5C is a 6-contact board connector with a mating contact pitch of 0.098". Featuring a dielectric voltage of 650VAC, it has an insulation resistance of 1Gohm and operates b/w -35°C to 85°C. Ideal for commercial applications, this socket-style connector offers crimp termination and is rated for signal currents up to 3A.
801-43-025-10-012000
Mill-max Mfg
Mill-max Mfg 801-43-025-10-012000 is a 25-contact board connector with matte tin over nickel finish. It has a terminal pitch of 2.54mm and UL flammability rating of 94V-0. Ideal for applications requiring female socket connectors on PCBs.
746-066-520-601
Edac
Edac 746-066-520-601 is a 2-row card edge connector with 66 contacts. It features a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
473882001
Molex 473882001 is a PCB connector with 0.1" pitch, GOLD NICKEL finish, and GLASS FILLED LCP insulator. It has 6 contacts, rated for 0.5A signal current, and operates b/w -40 to 85°C. Ideal for commercial applications requiring durable surface mount connectors on boards with 16.764mm row spacing.
FTSH-107-01-L-DV-K-A-P-FR
FTSH-107-01-L-DV-K-A-P-FR by Samtec is a 2-row, 14-contact board connector with a terminal pitch of 1.27mm. It features surface mount termination and a tin finish with nickel barrier. This connector is commonly used in applications requiring male contact gender and straight mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
70543-0003
Molex 70543-0003 header connector features 0.1" pitch, 850VAC dielectric voltage, and -40 to 105°C operating range. Ideal for board connections in commercial applications requiring a durable, polarized housing with matte tin finish and phosphor bronze contacts.
70543-0002
Molex 70543-0002 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin finish, it offers high durability with 50 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, this connector has a polarization key and UL94V-0 flammability rating.
70543-0005
Molex 70543-0005 is a board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 600VAC voltage rating, and 3A signal current capacity. Ideal for use in electronics requiring durable male connectors with solder termination.
70543-0004
Molex 70543-0004 is a board connector with 0.1" pitch, 5 contacts, and 3A signal rating. It features TIN over nickel finish, glass-filled polyester insulator, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable male connectors with solder termination on rectangular PCB patterns.
70543-0108
Molex 70543-0108 is a board connector with 0.1" pitch, suitable for applications requiring a durable male receptacle with 4 contacts. It features tin contact finish, phosphor bronze material, and glass-filled polycarbonate insulation for reliability in commercial settings. Operating temperature ranges from -40 to 125°C, meeting UL and CSA standards.
70543-0107
Molex 70543-0107 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it offers 3A signal current and withstands temperatures from -40 to 125°C. With UL certification and black insulator color, this male connector has a durability of 50 cycles.
70543-0009
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 850VAC; No. of Connectors: ONE;
70543-0038
The Molex 70543-0038 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.5 inch. It has an insulation resistance of 1000000000 ohm and is commonly used in commercial applications requiring a durable and reliable connection.
70543-0036
Molex 70543-0036 header connector features 0.1" pitch, 600VAC voltage withstand, and 3A signal current rating. Ideal for board connections in commercial applications with UL and CSA standards compliance.
70543-0114
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
70543-0006
70543-0015
Molex 70543-0015 is a board connector with 16 contacts, 0.1" pitch, and 3A signal rating. It features glass-filled polyester insulation, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL94V-0 flammability rating.
70543-0008
70543-0037
70543-0039
70545-0038
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
70545-0036
Molex 70545-0036 header connector has a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and dielectric voltage rating of 850VAC. Ideal for board mounting applications in electronics, this male connector features a black insulator with UL94V-0 flammability rating and operates b/w -40 to +105°C temperature range.
70545-0011
Molex 70545-0011 is a board connector with 0.1" pitch, 840VAC dielectric voltage, and 3A signal current rating. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C. Features black insulator color, solder termination, and UL94V-0 flammability rating.
70543-0045
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved