Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 70543-0006 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring 7 contacts, it has a durability of 50 cycles and operates b/w -40 to 125°C. With matte tin over nickel finish, this male connector offers high insulation resistance of 1Gohm and withstands up to 600VAC.
Median Price
$1.176
Lifecycle Status
Suppliers In-Stock
57
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.590
100+ parts
-
1k+ parts
10k+ parts
Sager
$0.771
$0.605
Avnet
$0.801
$0.675
Farnell
$1.340
$0.777
$0.722
Newark
$1.570
$1.050
$0.900
RS (Exports)
$1.580
Mouser Electronics
$1.590
$1.150
$0.931
$0.819
Arrow
$1.725
$1.206
$0.947
$0.806
DigiKey
$1.770
Element14
$2.100
$1.320
Heilind Electronics
NEP Electronics
Powell Electronics
$0.750
Chip1Stop
$0.872
$0.747
$0.706
TTI Europe
Interstate Connecting
$0.766
$0.642
$0.607
Verical
TTI
Master Electronics
$0.861
Distrelec
Digiode
$0.560
DF Sales Co.
$0.720
TestEquity
$0.730
Nova Conductors
$0.864
Rapid Electronics
$1.058
Component Electronics Inc.
$0.870
TME
$1.610
$1.260
$1.100
Component Sense
Vyrian
Jameco Electronics
Goldney Electronics S.L.
VNN
Prism Electronics
IBS Electronics
$0.916
EMSNET
ECAB
ACDS - Activité Composants Distribution Service
Sogenti Electronics
A&K Electronics
Rotakorn
MISTER SPROCKETS
NAC Semi
$1.360
Inventory MP
Elcom Components
Atlantic Semiconductor
Semtec, LLC
Resion
Bristol Electronics
Flex Direct, LLC
Mil-Aero Solutions, Inc.
Quantum Digital Technology
Sensible Micro Corp
Electronics Depot
Connector Distribution Corp
Right Parts Inc.
Electronic Expediters
Semicontronic
$0.500
$0.488
$0.485
Corphita
$0.531
Continental Prestige Electronics
$0.818
$0.802
Argo Parts USA
Aranea Global
$0.846
$0.813
Andel Nordic
$1.406
$1.350
Aztec Data Supply Inc.
$4.126
GreenTree Electronics
$0.909
Kepictronics
Futuretech Components
Abacus Technologies
Cyclops Electronics Ltd (Excess)
Eastek
ChipTracer
Having a small mating contact pitch allows for more contacts to be present in a smaller space, making this product suitable for applications where space is limited.
The compact body length of 0.8 inch makes this connector suitable for applications where space is a concern.
High insulation resistance ensures reliable and stable connections, making this product ideal for use in various electronic devices.
The high dielectric voltage rating of 600VAC ensures safety and reliability, making this connector suitable for applications requiring high voltage.
The matte tin over nickel finish provides good conductivity and corrosion resistance, ensuring long-term performance of the connector.
With a maximum operating temperature of 125°C, this connector can withstand higher temperatures, making it suitable for use in various environments.
Having a UL 94V-0 flammability rating indicates that the connector meets stringent safety standards, making it a reliable choice for electronic applications.
With a rated current of 3A, this connector can handle moderate electrical currents, making it suitable for signal transmission in electronic devices.
Having only one connector simplifies the installation process, making this product user-friendly and efficient for assembly.
The board mounting type allows for easy and secure attachment to PCBs, making this connector a convenient choice for board-level applications.
Headers & Edge Type Connectors 70543-0006 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
70543-0006 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Multiple Devices Raw Material Manufacturing 11/Nov/2014
PCN Assembly/Origin - Mult Devs Additional Resin Source 18/May/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Excel (Suzhou) Semiconductor
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Kingwell Technonlogy
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Frontier Electronics
S2B-ZR-SM4A-TF(LF)(SN)
J S T Mfg
S2B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC Dielectric Withstanding Voltage, and -25 to 85 °C operating range. Ideal for applications requiring POLARIZED HOUSING, RECTANGULAR PCB Contact Pattern, and SURFACE MOUNT Termination Type.
43025-1000
Molex
The Molex 43025-1000 is a board connector with 10 contacts arranged in S0P10 pattern. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it features a polyamide insulator, operates b/w -40 to 105°C, and has UL94V-0 flammability rating.
PHR-4-L
PHR-4-L by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, POLYAMIDE66 insulator, and 800VAC dielectric voltage. It has a 0.386" body length, -25 to 85 °C operating temp range, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable signal transmission with 2A current at up to 24 AWG wire size.
DTM06-3S-E007
TE Connectivity
TE Connectivity's DTM06-3S-E007 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized housing and UL flammability rating of 94V-0.
B10B-PHDSS(LF)(SN)
B10B-PHDSS(LF)(SN) by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 800VAC, it is ideal for applications requiring reliable board-to-board connections in electronics.
BM04B-SRSS-TB(LF)(SN)(P)
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
150201
Weidmueller & Kg
Weidmueller & Kg's 150201 is a BOARD CONNECTOR with TIN finish, 4 contacts, and FEMALE gender. It is used for CABLE mounting with SCREW termination in PLUG body style.
74441-0010
Molex 74441-0010 is a board connector with 20 contacts, 0.031" mating pitch, and 0.433" body length. Ideal for commercial applications, it has a matte tin finish, operates b/w -40 to 85°C, and features a glass-filled polyethylene insulator.
B4B-ZR-SM4-TF(LF)(SN)
B4B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
09185106324
Harting Electronics & Kg
09185106324 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000 ohm, and Body Length of 0.807". It is used in BOARD EURO CONNECTOR applications, featuring POLARIZED HOUSING for polarization key and SOLDER termination type for durability.
17211102101
17211102101 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts, GOLD OVER NICKEL finish, and GLASS FILLED POLYETHYLENE insulator. It has a Mating Contact Pitch of 0.079", operates b/w -55 to 125 °C, and offers durability up to 250 cycles. Ideal for applications requiring high insulation resistance and reliable signal current of 1A in commercial settings.
1-281742-0
TE Connectivity 1-281742-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and right angle mounting for various applications.
104257-1
TE Connectivity 104257-1 is a board connector with 0.1" pitch, suitable for commercial applications. It features a dielectric voltage of 600VAC, insulation resistance of 5G ohm, and operating temperature range from -65 to 105°C. Ideal for cable mounting with crimp/IDC termination, this female connector has a total of 2 contacts and UL94V-0 flammability rating.
VHR-6N-M
VHR-6N-M by J S T Mfg is a 6-contact board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector supports wire sizes from 22 to 18 AWG and offers high insulation resistance at 1000000000 ohm.
FTSH-105-01-L-DV-007-K
Samtec
Samtec's FTSH-105-01-L-DV-007-K is a 2-row, 9-contact board connector with a contact pitch of 0.05". It features liquid crystal polymer insulator material, tin termination finish, and operates b/w -55°C to 125°C. Ideal for applications requiring high signal current capacity and reliable surface mount connections.
QSH-030-01-L-D-A-TR
Samtec's QSH-030-01-L-D-A-TR is a 60-contact, 2-row stacking connector with 0.02" pitch. It features tin finish with nickel barrier, operates b/w -55°C to 125°C, and supports up to 1A signal current. Ideal for board-to-board applications requiring high reliability in commercial settings.
31249116
Ria Electronic
BOARD CONNECTOR; Option: GENERAL PURPOSE;
43645-0600
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
DF11-10DP-2DSA(01)
Hirose Electric
The Hirose Electric DF11-10DP-2DSA(01) is a 10-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring gold over nickel termination finish, it offers high durability with 50 cycles and insulation resistance of 1Gohm. With a dielectric voltage rating of 650VAC, this connector is ideal for PCB mounting in various electronic devices.
8-188275-0
TE Connectivity 8-188275-0 is a 2-row board connector with 10 contacts, rated for 1.5A signal current at 100V. Featuring a mating contact pitch of 0.05", it has a body length of 0.578" and insulation resistance of 1Gohm. Ideal for PCB applications requiring high reliability and operating temperatures from -40 to +105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
70543-0003
Molex 70543-0003 header connector features 0.1" pitch, 850VAC dielectric voltage, and -40 to 105°C operating range. Ideal for board connections in commercial applications requiring a durable, polarized housing with matte tin finish and phosphor bronze contacts.
70543-0002
Molex 70543-0002 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin finish, it offers high durability with 50 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, this connector has a polarization key and UL94V-0 flammability rating.
70543-0007
Molex 70543-0007 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin over nickel finish, it offers high durability with 50 cycles and operates b/w -40°C to 105°C. Ideal for commercial use, this connector has UL94V-0 flammability rating and glass-filled polyester insulation material.
70543-0005
Molex 70543-0005 is a board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 600VAC voltage rating, and 3A signal current capacity. Ideal for use in electronics requiring durable male connectors with solder termination.
70543-0004
Molex 70543-0004 is a board connector with 0.1" pitch, 5 contacts, and 3A signal rating. It features TIN over nickel finish, glass-filled polyester insulator, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable male connectors with solder termination on rectangular PCB patterns.
70543-0108
Molex 70543-0108 is a board connector with 0.1" pitch, suitable for applications requiring a durable male receptacle with 4 contacts. It features tin contact finish, phosphor bronze material, and glass-filled polycarbonate insulation for reliability in commercial settings. Operating temperature ranges from -40 to 125°C, meeting UL and CSA standards.
70543-0107
Molex 70543-0107 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it offers 3A signal current and withstands temperatures from -40 to 125°C. With UL certification and black insulator color, this male connector has a durability of 50 cycles.
70543-0009
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 850VAC; No. of Connectors: ONE;
70543-0038
The Molex 70543-0038 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.5 inch. It has an insulation resistance of 1000000000 ohm and is commonly used in commercial applications requiring a durable and reliable connection.
70543-0036
Molex 70543-0036 header connector features 0.1" pitch, 600VAC voltage withstand, and 3A signal current rating. Ideal for board connections in commercial applications with UL and CSA standards compliance.
70543-0114
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
70543-0015
Molex 70543-0015 is a board connector with 16 contacts, 0.1" pitch, and 3A signal rating. It features glass-filled polyester insulation, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL94V-0 flammability rating.
70543-0008
70543-0037
70543-0039
70545-0038
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
70545-0036
Molex 70545-0036 header connector has a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and dielectric voltage rating of 850VAC. Ideal for board mounting applications in electronics, this male connector features a black insulator with UL94V-0 flammability rating and operates b/w -40 to +105°C temperature range.
70545-0011
Molex 70545-0011 is a board connector with 0.1" pitch, 840VAC dielectric voltage, and 3A signal current rating. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C. Features black insulator color, solder termination, and UL94V-0 flammability rating.
70543-0019
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved