Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 70545-0036 header connector has a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and dielectric voltage rating of 850VAC. Ideal for board mounting applications in electronics, this male connector features a black insulator with UL94V-0 flammability rating and operates b/w -40 to +105°C temperature range.
Median Price
$0.459
Lifecycle Status
Suppliers In-Stock
46
In-Stock Inventory
1k+
Avnet
1+ parts
$0.403
100+ parts
-
1k+ parts
10k+ parts
Sager
$0.447
$0.339
Master Electronics
$0.448
$0.395
$0.370
Arrow
$0.629
$0.502
$0.431
$0.373
Mouser Electronics
$0.650
$0.494
$0.466
$0.402
RS (Exports)
$0.700
$0.560
RS Americas
$0.930
$0.620
$0.510
DigiKey
$0.950
TTI Europe
$0.354
Powell Electronics
$0.400
$0.393
Chip1Stop
$0.343
$0.330
$0.302
Verical
$0.444
Heilind Electronics
$0.386
$0.363
TTI
$0.419
$0.387
$0.357
Farnell
Interstate Connecting
$0.518
$0.434
$0.410
Newark
$0.754
$0.708
Freelance Electronics
$0.271
$0.285
$0.269
Digiode
$0.293
DF Sales Co.
$0.300
TestEquity
$0.390
Nova Conductors
$0.438
IBS Electronics
$0.477
$0.449
TME
$0.595
$0.565
Vyrian
Sensible Micro Corp
VNN
Conversion2
Prism Electronics
Mil-Aero Solutions, Inc.
Jameco Electronics
Lantek
Classic Components Corporation
SPM Sales
Resion
PC Components Company LLC
Bristol Electronics
Electro Sonic
$0.457
Elcom Components
Semtec, LLC
A2Z Electronics, Inc.
Speed Components Ltd
Century Electronics Ltd.
ZD Integrated Circuits Inc.
J & M Industries LLC
Semicontronic
$0.262
$0.255
$0.254
Corphita
$0.277
Continental Prestige Electronics
$0.429
Argo Parts USA
$0.425
Allen Electronics Distributors
$0.680
Andel Nordic
$1.134
$1.089
Perfect Parts
Authorized Procurement Solutions
Futuretech Components
Assy Fe
Netroflash
$0.416
$0.407
GreenTree Electronics
Eastek
The close contact pitch allows for efficient signal transmission in a compact space, making it ideal for densely populated circuits.
The compact body length makes this connector suitable for applications where space is limited.
High insulation resistance ensures reliable performance and minimizes signal interference.
The narrow body width saves valuable space on the PCB while still providing a strong connection.
Withstands high voltages, ensuring safety and reliability in various applications.
The durable finish provides excellent conductivity and corrosion resistance for long-term use.
The insulator material offers high mechanical strength and temperature resistance for improved durability.
The mounting option allows for secure attachment to the PCB, ensuring stability during operation.
The high operating temperature range makes this connector suitable for a wide range of environments and applications.
The low minimum operating temperature ensures reliable performance even in extreme cold conditions.
The thick plating provides enhanced durability and conductivity for long-lasting performance.
This type of connector is specifically designed for PCB applications, ensuring a secure and reliable connection.
The use of phosphor bronze ensures excellent electrical conductivity and durability for long-term use.
Headers & Edge Type Connectors 70545-0036 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
70545-0036 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Multiple Devices Raw Material Manufacturing 11/Nov/2014
PCN Assembly/Origin - Mult Devs Additional Resin Source 18/May/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Nte Electronics
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
1N4148WT
Sangdest Microelectronics (Nanjing)
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Semtech
Philips Components
43645-0400
Molex
Molex 43645-0400 is a board connector with 4 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring durable female connectors with crimp termination in black polyester insulator material.
B6B-EH-A(LF)(SN)
J S T Mfg
B6B-EH-A(LF)(SN) by J S T Mfg is a 6-contact male board connector with 0.098" mating contact pitch, 0.689" body length, and 0.15" body width. It features gold mating contact finish, solder termination type, and polyamide66 insulator material. Ideal for applications requiring a straight mounting style and rectangular contact pattern.
51021-0600
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
5040500491
Molex 5040500491 is a BOARD CONNECTOR with 4 contacts, 0.059" pitch, and 1000000000 ohm insulation resistance. Ideal for surface mount applications in electronics with operating temperatures from -25 to 85 °C.
VHR-3N-BL
VHR-3N-BL by J S T Mfg is a 3-contact BOARD CONNECTOR with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation material, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector offers reliable performance with a polarization key and blue insulator color.
8-5353189-0
TE Connectivity
TE Connectivity 8-5353189-0 is a board stacking connector with 140 contacts, 2 rows, and 0.024" mating pitch. Ideal for commercial applications, it features a 200VAC dielectric voltage rating and polyethylene insulation material. Operating b/w -40°C to 85°C, this female connector offers durability with a 50-cycle lifespan.
SIM8066-6-1-14-01-A
Global Connector Technology
SIM8066-6-1-14-01-A by Global Connector Technology is a PCB connector with 2 rows, 6 contacts, and insulation resistance of 1000000000 ohm. It has a dielectric voltage of 500VAC, operates b/w -40 to 85 °C, and is ideal for applications requiring a durable female connector with right-angle mounting.
PAP-06V-S
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
B4B-PH-SM4-TBT(LF)(SN)
B4B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with Tin (Sn) finish. It has a terminal pitch of 2mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
801-43-020-10-012000
Mill-max Mfg
Mill-max Mfg's 801-43-020-10-012000 is a 20-contact board connector with matte tin over nickel finish. Featuring a terminal pitch of 2.54mm, it is ideal for applications requiring a female socket connector with UL94V-0 flammability rating. Suitable for straight mounting on boards, this connector offers reliable solder termination.
B03B-PASK-1(LF)(SN)
B03B-PASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3A signal current rating, 0.079" contact pitch, and 800VAC dielectric voltage. Ideal for board mounting applications, it features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and tin over copper mating finish. Operating b/w -25 to 85 °C, this UL-rated connector offers high insulation resistance of 1000000000 ohm.
51110-0450
Molex 51110-0450 is a 2-row board connector with 0.079" contact pitch, suitable for commercial applications. Featuring polyester insulation, it has 4 contacts with 40mohm resistance and operates b/w -40 to 105°C. Ideal for cable mounting, it offers a polarization key and UL94V-0 flammability rating.
504077-1891
Molex 504077-1891 is a PCB connector with 0.043" contact pitch, 8u plating thickness, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features liquid crystal polymer insulator material and operates b/w -40 to 85 °C.
746-064-520-601
Edac
Edac 746-064-520-601 is a 64-contact card edge connector with 0.125" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 1500VAC and insulation resistance of 5Gohm, making it ideal for applications requiring high reliability in temperatures ranging from -40 to 105°C.
66506-354
Amphenol Communications Solutions
Amphenol's 66506-354 is a 40-contact, 2-row board connector with a terminal pitch of 2.54mm. Featuring UL94V-0 flammability rating, it is ideal for applications requiring male solder contacts in straight mounting style.
35362-0250
Molex 35362-0250 is a board connector with 2 contacts, featuring TIN COPPER finish. It has a mating contact pitch of 0.079" and body dimensions of 0.303" x 0.217" x 0.335". Ideal for commercial applications requiring reliable rectangular PCB contact patterns and solder termination.
TSW-103-07-G-S
Samtec
Samtec's TSW-103-07-G-S is a 3-contact board connector with gold over nickel termination, ideal for commercial applications. Featuring a mating contact pitch of 0.1", body dimensions of 0.3" x 0.098" x 0.1", and operating temperatures from -55°C to 125°C, it offers reliable connectivity in various electronic devices. The connector's UL-certified insulator material and rectangular PCB contact pattern make it suitable for use in black-colored assemblies requiring high flammability resistance.
DF19-20S-1C
Hirose Electric
DF19-20S-1C by Hirose Electric is a 20-contact FFC/FPC connector with 0.039" pitch, 300VAC dielectric voltage, and -35 to 85°C operating range. Ideal for commercial applications, it features a polarized housing, bellowed contact design, and crimp termination for reliable signal transmission in cable assemblies.
53261-0671
The Molex 53261-0671 is a board connector with 6 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.049", it has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for applications requiring a durable, right-angle mounting style with surface mount termination.
70553-0005
Molex 70553-0005 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", matte tin finish, and glass-filled polyester insulator. It is used in applications requiring right-angle mounting on PCBs for reliable commercial connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
70543-0003
Molex 70543-0003 header connector features 0.1" pitch, 850VAC dielectric voltage, and -40 to 105°C operating range. Ideal for board connections in commercial applications requiring a durable, polarized housing with matte tin finish and phosphor bronze contacts.
70543-0002
Molex 70543-0002 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin finish, it offers high durability with 50 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, this connector has a polarization key and UL94V-0 flammability rating.
70543-0007
Molex 70543-0007 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin over nickel finish, it offers high durability with 50 cycles and operates b/w -40°C to 105°C. Ideal for commercial use, this connector has UL94V-0 flammability rating and glass-filled polyester insulation material.
70543-0005
Molex 70543-0005 is a board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 600VAC voltage rating, and 3A signal current capacity. Ideal for use in electronics requiring durable male connectors with solder termination.
70543-0004
Molex 70543-0004 is a board connector with 0.1" pitch, 5 contacts, and 3A signal rating. It features TIN over nickel finish, glass-filled polyester insulator, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable male connectors with solder termination on rectangular PCB patterns.
70543-0108
Molex 70543-0108 is a board connector with 0.1" pitch, suitable for applications requiring a durable male receptacle with 4 contacts. It features tin contact finish, phosphor bronze material, and glass-filled polycarbonate insulation for reliability in commercial settings. Operating temperature ranges from -40 to 125°C, meeting UL and CSA standards.
70543-0107
Molex 70543-0107 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it offers 3A signal current and withstands temperatures from -40 to 125°C. With UL certification and black insulator color, this male connector has a durability of 50 cycles.
70543-0009
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 850VAC; No. of Connectors: ONE;
70543-0038
The Molex 70543-0038 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.5 inch. It has an insulation resistance of 1000000000 ohm and is commonly used in commercial applications requiring a durable and reliable connection.
70543-0036
Molex 70543-0036 header connector features 0.1" pitch, 600VAC voltage withstand, and 3A signal current rating. Ideal for board connections in commercial applications with UL and CSA standards compliance.
70543-0114
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
70543-0006
70543-0015
Molex 70543-0015 is a board connector with 16 contacts, 0.1" pitch, and 3A signal rating. It features glass-filled polyester insulation, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL94V-0 flammability rating.
70543-0008
70543-0037
70543-0039
70545-0038
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
70545-0011
Molex 70545-0011 is a board connector with 0.1" pitch, 840VAC dielectric voltage, and 3A signal current rating. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C. Features black insulator color, solder termination, and UL94V-0 flammability rating.
70545-0049
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved