Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 70543-0114 is a board connector with 10 contacts, 0.1" pitch, and 3A signal current rating. It features TIN over nickel finish, glass-filled polycarbonate insulator, and operates b/w -40 to 125°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL94V-0 flammability rating.
Median Price
$1.596
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$1.388
100+ parts
-
1k+ parts
$1.168
10k+ parts
Interstate Connecting
$1.591
$1.395
Arrow
$1.327
$1.152
Chip1Stop
$1.900
Mouser Electronics
$2.590
$1.990
$1.820
$1.720
Master Electronics
$1.710
$1.690
Verical
$1.780
$1.680
$1.660
Avnet
$1.683
$1.382
DigiKey
$1.330
Powell Electronics
$1.240
TTI
$1.360
$1.090
$1.020
Nova Conductors
$1.266
Digiode
$1.319
TME
$1.810
$1.630
VNN
Vyrian
IBS Electronics
$1.992
$1.964
Sensible Micro Corp
NAC Semi
Vicor Industries, Inc.
Semi Source
Semicontronic
$0.940
$0.916
$0.912
Aranea Global
$1.241
$1.191
Corphita
$1.249
Continental Prestige Electronics
Argo Parts USA
Aztec Data Supply Inc.
$8.063
Andel Nordic
$10.846
$10.413
Perfect Parts
Assy Fe
The close proximity of the mating contact pitch ensures a secure and reliable connection between the header and edge connectors.
The longer body length provides ample space for the connectors to be securely mounted on the board.
High insulation resistance ensures minimal signal loss and interference, making this product suitable for high-performance applications.
The high dielectric voltage rating makes this product suitable for applications that require high voltage capability.
Tin over nickel termination contact finish provides excellent durability and corrosion resistance for long-lasting performance.
With a high maximum operating temperature, this product can withstand elevated temperatures without compromising its performance.
The thick plating thickness ensures robust and reliable connectivity for the connectors.
Phosphor bronze contact material offers excellent conductivity and durability for reliable signal transmission.
The use of glass-filled polycarbonate insulator material provides high strength and durability, making this product suitable for harsh environments.
With a total of 10 contacts, this product allows for multiple connections to be made, increasing versatility and functionality.
Headers & Edge Type Connectors 70543-0114 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
70543-0114 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Additional Resin Source 18/May/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Frontier Electronics
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
MMBF170LT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SHR-14V-S-B
J S T Mfg
SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
HTSW-102-07-L-S
Samtec
Samtec's HTSW-102-07-L-S is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and termination finish of TIN over NICKEL. Ideal for commercial applications, it has a temperature range from -55 to 125°C and UL flammability rating of 94V-0.
1-640250-5
TE Connectivity
TE Connectivity 1-640250-5 is a board connector with 15 contacts, 0.156" pitch, and 6.5A signal current rating. It features glass-filled polyamide insulation, operates b/w -55 to 105°C, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable female connectors with crimp termination in a polarized housing design.
114-00841-68
Amphenol Communications Solutions
Amphenol's 114-00841-68 PCB connector features a mating contact pitch of 0.043", liquid crystal polymer insulator, and right angle mounting style. With 8 contacts, it is ideal for board mounting applications in commercial settings.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
NSHR-03V-S
NSHR-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with TIN finish, ideal for CABLE mounting. Made of COPPER ALLOY, it has UL 94V-0 flammability rating and features FEMALE contacts suitable for CRIMP termination.
B6B-PH-K-S(LF)(SN)
B6B-PH-K-S(LF)(SN) by J S T Mfg is a 6-pin board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in applications requiring a straight mounting style and press fit termination type.
801-43-025-10-004000
Mill-max Mfg
801-43-025-10-004000 by Mill-max Mfg is a 25-contact board connector with matte tin finish. It has 2.54mm pitch, solder termination, and female contacts. Ideal for applications requiring straight mounting of socket-style connectors on boards.
54132-3062
Molex
Molex 54132-3062 FFC/FPC connector with 30 contacts, 0.020" pitch, and GOLD finish. Ideal for board mounting with POLYAMIDE insulator material. Operating temp -20 to 85 °C, UL94V-0 rated for commercial reliability.
90814-0904
The Molex 90814-0904 header connector features a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". Ideal for board mounting with a max operating temperature of 105°C, it is commonly used in commercial applications requiring a rated current of 1.2A.
351-80-139-00-004101
Preci-dip Sa
351-80-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with 39 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.54mm and UL Flammability Code of 94V-0. Ideal for applications requiring reliable male connectors on circuit boards with solder termination.
51103-0400
The Molex 51103-0400 is a board connector with 4 contacts, 0.098" pitch, and POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 105 °C, has a dielectric voltage of 1400VAC, and is UL94V-0 rated. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
VHR-2N-BK
BOARD CONNECTOR;
1712961105
Molex 1712961105 header connector features 0.075" mating contact pitch, matte tin over nickel termination finish, and polyethylene insulator. With 15 loaded rows and 150 contacts, it is ideal for board connections in commercial applications with a rated signal current of 0.75A.
22-05-2051
Molex 22-05-2051 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring matte tin over nickel termination finish, it offers high durability with 25 cycles and reliable performance in commercial applications. The connector has a total of 5 contacts, solder termination type, and white polyamide insulator material.
78171-0003
Molex 78171-0003 is a board connector with 0.047" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications requiring a durable male plug with surface mount termination and black insulator color.
53398-0271
53398-0271 by Molex is a board connector with 0.049" mating contact pitch, 100M ohm insulation resistance, and 39u plating thickness. Ideal for applications requiring a male blade pin-skt contact style, it offers a durability of 30 cycles and operates b/w -40 to 85°C temperature range.
BM05B-SRSS-TB(LF)(SN)
BM05B-SRSS-TB(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features POLYAMIDE insulator, COPPER ALLOY contacts, and operates b/w -25 to 85 °C.
104031-0811
104031-0811 by Molex is a PCB connector with 8 contacts, gold finish, and 0.043" pitch. It has a glass-filled liquid crystal polymer insulator, operates b/w -25°C to 85°C, and offers durability of 10k cycles. Ideal for commercial applications requiring male compression contacts in right-angle mounting on boards.
S2B-XH-A-1(LF)(SN)
S2B-XH-A-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with BRASS contacts and TIN finish. Featuring 2 contacts with 2.5mm pitch, it is ideal for RIGHT ANGLE mounting applications in electronics requiring UL 94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
70543-0003
Molex 70543-0003 header connector features 0.1" pitch, 850VAC dielectric voltage, and -40 to 105°C operating range. Ideal for board connections in commercial applications requiring a durable, polarized housing with matte tin finish and phosphor bronze contacts.
70543-0002
Molex 70543-0002 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin finish, it offers high durability with 50 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, this connector has a polarization key and UL94V-0 flammability rating.
70543-0007
Molex 70543-0007 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin over nickel finish, it offers high durability with 50 cycles and operates b/w -40°C to 105°C. Ideal for commercial use, this connector has UL94V-0 flammability rating and glass-filled polyester insulation material.
70543-0005
Molex 70543-0005 is a board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 600VAC voltage rating, and 3A signal current capacity. Ideal for use in electronics requiring durable male connectors with solder termination.
70543-0004
Molex 70543-0004 is a board connector with 0.1" pitch, 5 contacts, and 3A signal rating. It features TIN over nickel finish, glass-filled polyester insulator, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable male connectors with solder termination on rectangular PCB patterns.
70543-0108
Molex 70543-0108 is a board connector with 0.1" pitch, suitable for applications requiring a durable male receptacle with 4 contacts. It features tin contact finish, phosphor bronze material, and glass-filled polycarbonate insulation for reliability in commercial settings. Operating temperature ranges from -40 to 125°C, meeting UL and CSA standards.
70543-0107
Molex 70543-0107 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it offers 3A signal current and withstands temperatures from -40 to 125°C. With UL certification and black insulator color, this male connector has a durability of 50 cycles.
70543-0009
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 850VAC; No. of Connectors: ONE;
70543-0038
The Molex 70543-0038 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.5 inch. It has an insulation resistance of 1000000000 ohm and is commonly used in commercial applications requiring a durable and reliable connection.
70543-0036
Molex 70543-0036 header connector features 0.1" pitch, 600VAC voltage withstand, and 3A signal current rating. Ideal for board connections in commercial applications with UL and CSA standards compliance.
70543-0006
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
70543-0015
Molex 70543-0015 is a board connector with 16 contacts, 0.1" pitch, and 3A signal rating. It features glass-filled polyester insulation, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL94V-0 flammability rating.
70543-0008
70543-0037
70543-0039
70545-0038
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
70545-0036
Molex 70545-0036 header connector has a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and dielectric voltage rating of 850VAC. Ideal for board mounting applications in electronics, this male connector features a black insulator with UL94V-0 flammability rating and operates b/w -40 to +105°C temperature range.
70545-0011
Molex 70545-0011 is a board connector with 0.1" pitch, 840VAC dielectric voltage, and 3A signal current rating. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C. Features black insulator color, solder termination, and UL94V-0 flammability rating.
70543-0126
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved