Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 5055680471 is a Combination Line Connector with 0.324" x 0.151" x 0.165" dimensions. Made of GLASS FILLED POLYAMIDE, it has 4 contacts and UL 94V-0 flammability rating. Ideal for board mounting, surface mount termination, and male contact gender in plug style applications.
Median Price
$0.392
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.238
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$0.360
Farnell
$0.594
$0.409
$0.357
Arrow
$0.746
$0.482
$0.468
$0.399
DigiKey
$0.750
$0.539
$0.481
Mouser Electronics
$0.462
Newark
$0.890
$0.675
$0.659
Verical
$0.484
$0.469
$0.400
Master Electronics
$0.358
Heilind Electronics
Chip1Stop
$0.383
TTI
Interstate Connecting
$0.364
Digiode
$0.226
Nova Conductors
$0.554
Vyrian
Bristol Electronics
IBS Electronics
$0.407
VNN
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Prism Electronics
Corphita
$0.214
Continental Prestige Electronics
$0.543
Argo Parts USA
$0.537
Allen Electronics Distributors
$0.790
$0.730
Aztec Data Supply Inc.
$2.237
Andel Nordic
$8.904
$8.548
Eastek
Perfect Parts
EMSNET (Excess)
GreenTree Electronics
Infinite Electronics LLP (Excess)
Netroflash
$0.526
$0.515
The compact body length allows for efficient use of space when connecting multiple connectors within a limited area.
The narrow body width further enhances the space-saving design of the connector, making it ideal for tight configurations.
The moderate body depth provides a sturdy structure for the connector, ensuring reliable connections without taking up excess space.
The use of glass-filled polyamide as the insulator material offers high durability and resistance to heat, making the connector suitable for demanding applications.
The empty shell design allows for customization and versatility in connection configurations, catering to specific project requirements.
The combination line connector type enables the seamless integration of multiple connections in a single unit, simplifying wiring setups.
The UL 94V-0 flammability rating ensures the safety and reliability of the connector, giving peace of mind in terms of fire resistance.
Compliance with UL standards guarantees the quality and performance of the connector, meeting industry requirements for electrical safety.
With four contacts available, the connector can accommodate multiple connections, providing flexibility in wiring configurations.
The board mounting type facilitates easy installation on circuit boards, offering convenience in setting up connections for electronic devices.
The surface mount termination type simplifies the soldering process, making it suitable for automated assembly and improving overall efficiency.
The male contact gender allows for secure and stable connections with female connectors, ensuring reliable signal transmission.
The plug-style body or shell design offers easy insertion and removal of the connector, enhancing user-friendliness during maintenance or upgrades.
The bellowed contact style provides flexibility and durability in making electrical connections, reducing the risk of signal loss or disconnection.
Combination Line Connectors 5055680471 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Reference Standard:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5055680471 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Siemens
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Microsemi
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Continental Device India
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
33481-0401
Molex 33481-0401 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED NYLON Insulator, and -40 to 125 °C Operating Temperature. It has 4 contacts for 22A signal current, suitable for commercial applications in cable mounting setups.
12176836
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; No. of Rows Loaded: 1; IEC Conformity: NO;
0-0350777-1
TE Connectivity
TE Connectivity 0-0350777-1 is a Combination Line Connector with 0.55"x.58"x1.08" dimensions, NYLON insulator, and -55 to 105°C operating range. It has 2 contacts, S0P2 arrangement, and male gender for cable mounting applications in commercial settings.
DT06-4S-C015
TE Connectivity's DT06-4S-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DTP06-2S-EE01
TE Connectivity's DTP06-2S-EE01 is a 1.867" x 0.883" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A signal current. It features polarized housing, UL flammability code 94V-0, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with strain relief.
194330013
Molex 194330013 is a 0.935" long Combination Line Connector with 2 contacts, male gender, and crimp termination. It offers high insulation resistance of 20MOhm and low contact resistance of 30mOhm. Ideal for commercial applications with operating temperatures from -40 to 120°C.
DT04-4P-CE03
TE Connectivity's DT04-4P-CE03 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and min of -55°C. Ideal for applications requiring a polarized, crimped male connector with strain relief mounting on cables.
12010975
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: CRIMP; Contact Style: RND PIN-SKT;
934453102
TE Connectivity 934453102 is a Combination Line Connector with 2 loaded rows. It operates b/w -55°C to 125°C, suitable for 115/230VAC mains connectors. Featuring a polarized design, it has a terminal pitch of 4.5mm and plug body style, ideal for cable mounting applications.
106462-1
TE Connectivity's 106462-1 is a Combination Line Connector with dimensions of 0.748" x 1.43" x 0.677". Made of POLYBUTYLENE TEREPHTHALATE, it operates b/w -30°C to 125°C. With a rated current of 20A, it has 2 contacts and is used for cable mounting applications.
10763414
COMBINATION LINE CONNECTOR;
12162280
Aptiv's 12162280 is a Combination Line Connector with dimensions of 0.838" x 0.767" x 1.066". Featuring 3 male contacts in RND PIN-SKT style, it is ideal for automotive applications.
DT04-12PA
TE Connectivity's DT04-12PA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
12047663
The Aptiv 12047663 is a combination line connector with a body length of 0.469", width of 0.404", and depth of 1.299". It is made of nylon and can operate in temperatures ranging from -40°C to 125°C. This connector has a total of 2 contacts, is mounted on a cable, and has a male contact gender.
AT04-4P-PM11
Amphenol
The Amphenol AT04-4P-PM11 is a 2-row combination line connector with 4 contacts, rated for 13A signal current. With dimensions of 2.19" x 1.46" x 0.69", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications requiring a male receptacle with round pin contact style.
1379658-1
TE Connectivity's 1379658-1 is a Combination Line Connector with dimensions of 0.465" x 0.748" x 0.396". Rated for 14V, it operates b/w -40 to 100°C. With UL certification, it has 4 female contacts and is ideal for cable mounting applications.
DT06-4S-CE02
TE Connectivity's DT06-4S-CE02 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
7282-1081-40
Yazaki
Yazaki's 7282-1081-40 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It has 8 contacts, male gender, and mates with 7283-1081-40. Designed for cable mounting, it is ideal for automotive wiring applications.
AT06-12SC-SS01
The Amphenol AT06-12SC-SS01 is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It has a compact body measuring 1.598" x 0.815" x 1.354", suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, making it ideal for various industrial and automotive uses.
5055650601
Molex 5055650601 is a 0.374" x 0.148" x 0.122" Combination Line Connector with 6 contacts, polyester insulator, and UL standard. It operates b/w -40°C to 105°C, ideal for cable mounting applications requiring female crimp termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5055650301
Molex 5055650301 is a 0.226" x 0.148" x 0.122" combination line connector with polyester insulator. It operates b/w -40°C to 105°C, UL certified, and has 3 female contacts for cable mounting via crimp termination. Ideal for various electronic applications requiring reliable connectivity.
5055650201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Material: POLYESTER;
5055650401
Molex 5055650401 is a Combination Line Connector with 0.276"x.148"x.122" dimensions, made of POLYESTER for -40 to 105°C temp range. It has 4 contacts, UL standard, FEMALE gender, RECEPTACLE style for CABLE mounting and CRIMP termination. Ideal for various electronic applications.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Filter Feature: NO; Body Width: .148 inch;
5055650701
The Molex 5055650701 is a combination line connector with dimensions of 0.423" x 0.148" x 0.122". It has a polyester insulator and can operate in temperatures ranging from -40°C to 105°C. This female receptacle connector has 7 contacts and is commonly used for cable mounting applications.
5055680271
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Additional Features: POLARIZED; Termination Type: SURFACE MOUNT;
5055671071
Molex 5055671071 is a Combination Line Connector with dimensions 0.62" x 0.154" x 0.165". It has 10 contacts, rated at 1.5A for signal current. Ideal for board mounting applications, it uses surface mount termination and operates b/w -40°C to 105°C.
5055670681
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -40 Cel; Body Length: .423 inch;
5055680671
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Length: .423 inch; Mating Contact Finish: NOT SPECIFIED;
5055671681
The Molex 5055671681 is a combination line connector with dimensions of 0.915" x 0.154" x 0.165". It has 16 contacts and is made of glass-filled polyamide. This surface mount plug connector is UL certified and commonly used in board mounting applications.
5055681071
The Molex 5055681071 is a combination line connector with dimensions of 0.62" x 0.152" x 0.165". It has a max operating temperature of 105°C and can handle a rated current of 1.5A. This surface mount connector is commonly used in board mounting applications.
5055670281
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Maximum Operating Temperature (Cel): 105; Body Length: .226 inch;
5055681081
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Empty Shell: NO; Body Length: .62 inch;
5055651401
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: NOT APPLICABLE;
5055680571
Molex 5055680571 is a male plug combination line connector with 5 contacts. It features TIN BISMUTH contact finish, GLASS FILLED POLYAMIDE insulator material, and UL 94V-0 flammability code. Ideal for surface mount board applications requiring compact 0.374" x 0.151" x 0.165" dimensions.
5055681471
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Reference Standard: UL;
5055650901
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5055651101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mixed Contacts: NO; Body Length: .62 inch;
5055651201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 105; Termination Contact Finish: NOT APPLICABLE; Termination Type: CRIMP;
5055680771
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .472 inch; Body Depth: .165 inch; No. of Rows Loaded: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved