Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 5055680271 is a POLYAMIDE COMBINATION LINE CONNECTOR with 2 contacts for BOARD mounting. It features SURFACE MOUNT termination and MALE contact gender. Ideal for applications requiring compact, reliable connections in electronic devices.
Median Price
$0.366
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.660
100+ parts
$0.502
1k+ parts
$0.448
10k+ parts
$0.336
Arrow
$0.685
$0.440
$0.435
$0.344
RS (Exports)
$0.700
-
Chip1Stop
$0.727
$0.593
$0.540
$0.505
RS Americas
$0.790
$0.630
$0.550
Element14
$0.854
$0.610
$0.531
Farnell
$0.355
Powell Electronics
$0.320
Verical
Master Electronics
$0.325
Newark
$0.479
DigiKey
$0.356
TTI
$0.365
Heilind Electronics
$0.348
NEP Electronics
Interstate Connecting
$0.342
Avnet
TestEquity
$0.380
Digiode
$0.490
Nova Conductors
$0.495
IBS Electronics
TME
$0.445
Vyrian
NAC Semi
$0.583
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
VNN
PC Components Company LLC
Bristol Electronics
Prism Electronics
Semicontronic
$0.263
$0.256
$0.255
Corphita
$0.464
Continental Prestige Electronics
$0.486
Argo Parts USA
$0.481
Netroflash
Allen Electronics Distributors
$0.570
Andel Nordic
$5.633
$5.408
Aztec Data Supply Inc.
$8.136
Perfect Parts
Authorized Procurement Solutions
Eastek
EMSNET (Excess)
Component Connect
Polyamide is known for its high strength, heat resistance, and electrical insulation properties, making it a reliable and durable choice for the insulator material in the combination line connector.
The combination line connector type allows for multiple functions and connections in one compact unit, making it versatile and efficient for various applications.
Having 2 contacts provides the flexibility to connect multiple components or circuits, allowing for more complex setups or configurations.
Board mounting ensures secure attachment to the circuit board, providing stability and reliability in the connection.
Surface mount termination offers easy installation on the circuit board surface, saving space and simplifying the assembly process.
Male contacts are typically used for plug connections, offering a reliable and secure fit with female connectors for consistent performance.
Combination Line Connectors 5055680271 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
5055680271 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
DT06-2S-P012
TE Connectivity
TE Connectivity's DT06-2S-P012 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C operating temperatures. It features a polarized design, UL certification, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a female plug contact style with strain relief option.
33482-6201
Molex
Molex 33482-6201 is a Combination Line Connector with dimensions 1.163" x 0.875" x 2.144". It has 12 contacts, male gender, and blade pin-skt style. Ideal for cable mounting applications requiring crimp termination in industries like automotive and electronics.
DTM04-12PA-L012
TE Connectivity's DTM04-12PA-L012, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 12 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a male contact gender and panel mounting with strain relief option.
282191-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
12162144
Aptiv
The Aptiv 12162144 is a Combination Line Connector with Mating Contact Pitch of 0.236", Body Width of 0.453", and Body Depth of 1.024". It operates b/w -40 to 125°C, has a Plating Thickness of 197u, and supports up to 14A signal current. Ideal for cable mounting applications requiring polarized housing with female blade pin-skt contacts.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
DT04-4P-CE02
TE Connectivity's DT04-4P-CE02 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125 °C and handles up to 13A signal current. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT04-12PC
TE Connectivity's DT04-12PC is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized, UL-rated connector with male contact gender and strain relief mounting option.
2-1445022-2
COMBINATION LINE CONNECTOR;
AT04-12PA
Amphenol
The Amphenol AT04-12PA is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It features polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-12SA connectors using crimp termination.
DT06-3S-CE04
TE Connectivity's DT06-3S-CE04 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 3 contacts, UL94V-0 flammability code, and a polarization key. Ideal for applications requiring a polarized, crimped female connector with strain relief on cable mounting.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
282089-1
TE Connectivity's 282089-1 is a Combination Line Connector with 0.236" pitch, rated for 24V and 14A signal current. Featuring glass-filled polyamide construction, it offers high durability with 10 cycles and operates b/w -40 to 125°C. Ideal for cable mounting applications, this connector has a total of 5 contacts and female contact gender.
DTM06-2S-P006
DTM06-2S-P006 by TE Connectivity is a combination line connector with dimensions of 1.145" x 0.569" x 0.508". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a crimp termination type and a max current rating of 7.5A.
AT06-3S-SR02BLK
The Amphenol AT06-3S-SR02BLK is a combination line connector with 3 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. With a plug body style and round pin socket contact, it is ideal for cable mounting applications.
AT04-6P
The Amphenol AT04-6P is a male combination line connector with 6 contacts, rated for 13A signal current. With a body size of 0.961" x 0.827" x 1.827", it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a receptacle contact style made of polyethylene insulator material.
4-1564526-1
TE Connectivity's 4-1564526-1 is a Combination Line Connector with dimensions of 2.461" x 1.567" x 1.854". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140 °C. Ideal for applications requiring a polarized, UL-rated connector with 18 contacts and a current rating of 20A.
5055650601
Molex 5055650601 is a 0.374" x 0.148" x 0.122" Combination Line Connector with 6 contacts, polyester insulator, and UL standard. It operates b/w -40°C to 105°C, ideal for cable mounting applications requiring female crimp termination.
1-480318-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Total No. of Contacts: 2;
DT06-12SA-CE13
TE Connectivity's DT06-12SA-CE13 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-certified connector with strain relief mounting on cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5055650301
Molex 5055650301 is a 0.226" x 0.148" x 0.122" combination line connector with polyester insulator. It operates b/w -40°C to 105°C, UL certified, and has 3 female contacts for cable mounting via crimp termination. Ideal for various electronic applications requiring reliable connectivity.
5055650201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Material: POLYESTER;
5055650401
Molex 5055650401 is a Combination Line Connector with 0.276"x.148"x.122" dimensions, made of POLYESTER for -40 to 105°C temp range. It has 4 contacts, UL standard, FEMALE gender, RECEPTACLE style for CABLE mounting and CRIMP termination. Ideal for various electronic applications.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Filter Feature: NO; Body Width: .148 inch;
5055650701
The Molex 5055650701 is a combination line connector with dimensions of 0.423" x 0.148" x 0.122". It has a polyester insulator and can operate in temperatures ranging from -40°C to 105°C. This female receptacle connector has 7 contacts and is commonly used for cable mounting applications.
5055671071
Molex 5055671071 is a Combination Line Connector with dimensions 0.62" x 0.154" x 0.165". It has 10 contacts, rated at 1.5A for signal current. Ideal for board mounting applications, it uses surface mount termination and operates b/w -40°C to 105°C.
5055670681
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -40 Cel; Body Length: .423 inch;
5055680671
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Length: .423 inch; Mating Contact Finish: NOT SPECIFIED;
5055671681
The Molex 5055671681 is a combination line connector with dimensions of 0.915" x 0.154" x 0.165". It has 16 contacts and is made of glass-filled polyamide. This surface mount plug connector is UL certified and commonly used in board mounting applications.
5055680471
Molex 5055680471 is a Combination Line Connector with 0.324" x 0.151" x 0.165" dimensions. Made of GLASS FILLED POLYAMIDE, it has 4 contacts and UL 94V-0 flammability rating. Ideal for board mounting, surface mount termination, and male contact gender in plug style applications.
5055681071
The Molex 5055681071 is a combination line connector with dimensions of 0.62" x 0.152" x 0.165". It has a max operating temperature of 105°C and can handle a rated current of 1.5A. This surface mount connector is commonly used in board mounting applications.
5055670281
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Maximum Operating Temperature (Cel): 105; Body Length: .226 inch;
5055681081
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Empty Shell: NO; Body Length: .62 inch;
5055651401
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: NOT APPLICABLE;
5055680571
Molex 5055680571 is a male plug combination line connector with 5 contacts. It features TIN BISMUTH contact finish, GLASS FILLED POLYAMIDE insulator material, and UL 94V-0 flammability code. Ideal for surface mount board applications requiring compact 0.374" x 0.151" x 0.165" dimensions.
5055681471
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Reference Standard: UL;
5055650901
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5055651101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mixed Contacts: NO; Body Length: .62 inch;
5055651201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 105; Termination Contact Finish: NOT APPLICABLE; Termination Type: CRIMP;
5055680871
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Body Width: .152 inch; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved