Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 5055671681 is a combination line connector with dimensions of 0.915" x 0.154" x 0.165". It has 16 contacts and is made of glass-filled polyamide. This surface mount plug connector is UL certified and commonly used in board mounting applications.
Median Price
$1.750
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$2.440
$1.900
$1.380
$1.110
TTI
$1.000
Nova Conductors
$1.011
Digiode
$1.510
VNN
Vyrian
Continental Prestige Electronics
$0.991
Argo Parts USA
Netroflash
Corphita
$1.431
Andel Nordic
$2.361
$2.267
Aztec Data Supply Inc.
$3.095
This product's compact body size of 0.915 inch allows for easy installation and integration in tight spaces, making it a versatile and convenient choice.
With a slim body width of 0.154 inch, this combination line connector offers a space-saving solution without sacrificing functionality, making it ideal for densely packed electronic devices.
The shallow body depth of 0.165 inch ensures that this connector does not protrude excessively, reducing the risk of accidental damage and enabling a sleek and streamlined design for your electronic application.
Constructed with durable and reliable glass-filled polyamide, this connector offers excellent electrical insulation pro/ties. It provides high resistance to heat, chemicals, and potential damage, making it a reliable choice for a wide range of applications.
The combination line connector design allows for the transmission of both power and signal connections in a single connector. This versatility simplifies the overall system design, reduces the number of components required, and enhances overall efficiency.
With a UL flammability code rating of 94V-0, this connector offers su/ior fire resistance pro/ties. It provides an extra layer of safety and reliability, making it suitable for use in critical applications that demand high levels of safety.
This connector complies with the reference standard established by UL. Meeting this standard ensures that the product has been rigorously tested for quality, safety, and /formance, making it a trustworthy choice for your electrical connections.
With a total of 16 contacts, this connector offers ample connectivity options for various electronic devices, enabling the transmission of multiple signals or power sources simultaneously for enhanced functionality.
The board mounting capability of this connector allows for easy and secure attachment to a circuit board. This simplifies the installation process and ensures a stable and reliable connection, making it an excellent choice for circuit board applications.
The surface mount termination design simplifies the assembly process by allowing the connector to be directly mounted onto the surface of a printed circuit board. This eliminates the need for through-hole soldering, reducing production time and enabling high-density configurations.
The male contact gender of this connector makes it compatible with a wide range of mating socket connectors. This ensures ease of connection and inter-o/ability, further enhancing the versatility and flexibility of this product.
This combination line connector features a plug body or shell style, which is designed to be easily inserted into a corresponding socket or receptacle. This user-friendly design allows for quick and secure connections, making it an ideal choice for applications requiring repeated plug and unplug cycles.
Combination Line Connectors 5055671681 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Reference Standard:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5055671681 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Nte Electronics
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Digitron Semiconductors
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
DTF13-6P
TE Connectivity
DTF13-6P by TE Connectivity is a combination line connector with 6 contacts, rated for 13A signal current at 250V. Featuring a right-angle mounting style and solder termination, it is ideal for board mounting applications in temperatures ranging from -55°C to 125°C. The connector's UL-certified design ensures safety and reliability in various electronic systems.
1473244-1
TE Connectivity's 1473244-1 is a Combination Line Connector with dimensions of 3.008" x 1.472" x 1.22". Rated for 12V, it has POLYAMIDE66 insulator material and operates b/w -40°C to 120°C. With a total of 81 contacts, it is used in cable mounting applications for female connectors with SQ PIN-SKT style pins.
34691-0200
Molex
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: COPPER ALLOY;
DRC13-40PA-G002
TE Connectivity's DRC13-40PA-G002 is a 40-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has dimensions of 2.908" x 1.699" x 1.202" and operates b/w -55°C to 125°C. Ideal for board mounting, this male connector with receptacle body style suits various applications requiring reliable connections in demanding environments.
AT06-12SA
Amphenol
The Amphenol AT06-12SA is a 12-contact combination line connector with polyethylene insulator. It has a rated current of 13A, operates b/w -55°C to 125°C, and features female contact gender. Ideal for cable mounting applications requiring a plug body style with round pin sockets.
DT04-4P-CE09
TE Connectivity's DT04-4P-CE09 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
ATM04-4P
Amphenol's ATM04-4P is a combination line connector with a body size of 0.772" x 0.756" x 1.72". It has 2 rows and can handle temperatures from -55°C to 125°C. With a rated current of 7.5A, it is commonly used in cable applications as a male receptacle connector with square pin sockets.
DT04-12PA-CE07
TE Connectivity's DT04-12PA-CE07 is a Combination Line Connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL certification and strain relief mounting option.
DT06-12SB-E003
TE Connectivity's DT06-12SB-E003 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DTM04-4P-E005
TE Connectivity's DTM04-4P-E005 is a 1.77" x 0.756" x 0.772" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. It operates b/w -55°C to 125°C, UL certified with polarized design for one connector application in cable mounting setups.
15317832
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Body Width: .909 inch; No. of Rows Loaded: 1;
ATM04-08PA
The Amphenol ATM04-08PA is a male combination line connector with 8 contacts, rated for 7.5A signal current. It has a body size of 1.252" x 0.795" x 1.72", made of polyethylene, suitable for cable mounting applications in temperatures ranging from -55°C to 125°C.
DT06-08SA-EP07
TE Connectivity's DT06-08SA-EP07 is a 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125 °C and handles up to 13A signal current. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief option.
DT06-3S
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: DT; Body or Shell Style: PLUG; MIL Conformity: NO;
19432-0013
Molex 19432-0013 is a COMBINATION LINE CONNECTOR with 2 contacts, FEMALE gender, and RECEPTACLE body. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity.
AT04-12PA-PM11
AT04-12PA-PM11 by Amphenol is a 2-row combination line connector with 12 contacts, rated for 13A signal current. With a body size of 2.98" x 1.339" x 1.803", it uses polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications requiring male contact gender and crimp termination.
AT4PS-CKIT
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
DTP04-4P-C015
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: 1.051 inch; Minimum Operating Temperature: -55 Cel; No. of Rows Loaded: 2;
1-480700-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
DT06-4S-C015
TE Connectivity's DT06-4S-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5055650301
Molex 5055650301 is a 0.226" x 0.148" x 0.122" combination line connector with polyester insulator. It operates b/w -40°C to 105°C, UL certified, and has 3 female contacts for cable mounting via crimp termination. Ideal for various electronic applications requiring reliable connectivity.
5055650201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Material: POLYESTER;
5055650401
Molex 5055650401 is a Combination Line Connector with 0.276"x.148"x.122" dimensions, made of POLYESTER for -40 to 105°C temp range. It has 4 contacts, UL standard, FEMALE gender, RECEPTACLE style for CABLE mounting and CRIMP termination. Ideal for various electronic applications.
5055650601
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Filter Feature: NO; Body Width: .148 inch;
5055650701
The Molex 5055650701 is a combination line connector with dimensions of 0.423" x 0.148" x 0.122". It has a polyester insulator and can operate in temperatures ranging from -40°C to 105°C. This female receptacle connector has 7 contacts and is commonly used for cable mounting applications.
5055680271
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Additional Features: POLARIZED; Termination Type: SURFACE MOUNT;
5055671071
Molex 5055671071 is a Combination Line Connector with dimensions 0.62" x 0.154" x 0.165". It has 10 contacts, rated at 1.5A for signal current. Ideal for board mounting applications, it uses surface mount termination and operates b/w -40°C to 105°C.
5055670681
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -40 Cel; Body Length: .423 inch;
5055680671
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Length: .423 inch; Mating Contact Finish: NOT SPECIFIED;
5055680471
Molex 5055680471 is a Combination Line Connector with 0.324" x 0.151" x 0.165" dimensions. Made of GLASS FILLED POLYAMIDE, it has 4 contacts and UL 94V-0 flammability rating. Ideal for board mounting, surface mount termination, and male contact gender in plug style applications.
5055681071
The Molex 5055681071 is a combination line connector with dimensions of 0.62" x 0.152" x 0.165". It has a max operating temperature of 105°C and can handle a rated current of 1.5A. This surface mount connector is commonly used in board mounting applications.
5055670281
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Maximum Operating Temperature (Cel): 105; Body Length: .226 inch;
5055681081
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Empty Shell: NO; Body Length: .62 inch;
5055651401
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: NOT APPLICABLE;
5055680571
Molex 5055680571 is a male plug combination line connector with 5 contacts. It features TIN BISMUTH contact finish, GLASS FILLED POLYAMIDE insulator material, and UL 94V-0 flammability code. Ideal for surface mount board applications requiring compact 0.374" x 0.151" x 0.165" dimensions.
5055681471
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Reference Standard: UL;
5055650901
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5055651101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mixed Contacts: NO; Body Length: .62 inch;
5055651201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 105; Termination Contact Finish: NOT APPLICABLE; Termination Type: CRIMP;
5055671271
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Minimum Operating Temperature: -40 Cel; Reference Standard: UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved