Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 5055680671 Combination Line Connector has a body size of 0.423" x 0.152" x 0.165", rated for 1.5A signal current, with POLYAMIDE insulator material. It operates b/w -40°C to 105°C, UL certified, featuring 6 contacts for surface mount board applications.
Median Price
$0.474
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.283
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.799
$0.605
$0.534
$0.524
Mouser Electronics
$0.870
$0.644
$0.568
$0.467
DigiKey
$0.890
$0.643
$0.574
RS (Exports)
Newark
$0.935
$0.762
$0.662
Chip1Stop
$0.495
Master Electronics
$0.453
Verical
$0.450
Powell Electronics
Element14
$0.540
TTI
$0.429
Farnell
$0.411
Interstate Connecting
$0.405
Digiode
$0.269
Nova Conductors
$0.535
Maritex
$1.084
$0.203
IBS Electronics
$0.505
TME
$0.591
Vyrian
VNN
Bristol Electronics
NAC Semi
ComSIT Distribution GmbH
Prism Electronics
Corphita
$0.255
Continental Prestige Electronics
Argo Parts USA
$0.518
Bastille Electronics
$0.508
$0.483
$0.476
Allen Electronics Distributors
$0.680
$0.530
Andel Nordic
$7.470
$7.171
Assy Fe
Perfect Parts
Infinite Electronics LLP (Excess)
Robosynatics
Compact size allows for space-saving installation, making this connector ideal for applications where space is limited.
Slim design enables close placement of multiple connectors on a board, maximizing connectivity options in a confined space.
Shallow depth facilitates easy integration into electronic devices with limited internal clearance, ensuring a seamless fit.
Polyamide provides excellent insulation properties, enhancing the overall safety and reliability of the connector.
High temperature rating allows for reliable performance in demanding environments, ensuring consistent connectivity under varying operating conditions.
Wide temperature range ensures versatility and durability, making the connector suitable for use in both extreme cold and hot climates.
Versatile connector type that can accommodate multiple functions, providing flexibility in designing complex electronic systems.
High current rating allows for reliable transmission of signals, making this connector suitable for applications requiring stable signal integrity.
Compliance with UL standards ensures quality and safety, giving customers confidence in the reliability of the product.
Multiple contact points increase connectivity options, enabling the transfer of data or power between multiple components within a device.
Board mounting simplifies installation and maintenance, providing a secure connection between the connector and the circuit board.
Surface mount termination facilitates quick and easy assembly, reducing production time and costs associated with soldering.
Male contacts are typically more durable and reliable, ensuring a stable connection over extended periods of use.
Combination Line Connectors 5055680671 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Termination Type:
Total No. of Contacts:
5055680671 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
4554
Jw Miller Magnetics
Other Semiconductors;
Central Semiconductor
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
Sensitron Semiconductor
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
First Components International
1554216004
Molex
WIRE AND CABLE;
DTP06-4S
Amphenol
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: POALRIZED; Total No. of Contacts: 4; Body Width: .866 inch;
1-770166-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; MIL Conformity: NO; Empty Shell: NO;
DT04-12PA-BE03
TE Connectivity
TE Connectivity's DT04-12PA-BE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped male connector with 12 contacts and UL94V-0 flammability rating.
DTM06-12SA
TE Connectivity's DTM06-12SA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with crimp termination.
1-480700-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
DT06-12SB-CE05
TE Connectivity's DT06-12SB-CE05 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and can handle up to 13A current. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
DTM04-08PA
TE Connectivity's DTM04-08PA is a 2-row, 8-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, male receptacle with strain relief.
1-776087-1
TE Connectivity 1-776087-1 is a Combination Line Connector with dimensions 2.394" x 1.498" x 1.492". It has 23 contacts, rated at 17A, suitable for board mounting applications at temperatures ranging from -40°C to 125°C. The connector features POLYBUTYLENE TEREPHTHALATE insulator material and UL94V-0 flammability code, making it ideal for various electronic systems requiring a polarized, right-angle male terminal connection.
1473244-1
TE Connectivity's 1473244-1 is a Combination Line Connector with dimensions of 3.008" x 1.472" x 1.22". Rated for 12V, it has POLYAMIDE66 insulator material and operates b/w -40°C to 120°C. With a total of 81 contacts, it is used in cable mounting applications for female connectors with SQ PIN-SKT style pins.
770680-1
TE Connectivity's 770680-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 23 contacts, rated at 17A for signal current, and operates b/w -40 to 125°C. Ideal for cable mounting applications with solder termination and polarized key design.
DTP04-4P-C015
TE Connectivity's DTP04-4P-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL certification.
DTP04-2P
TE Connectivity's DTP04-2P is a combination line connector with dimensions of 1.861" x 0.872" x 0.848". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is suitable for cable mounting applications and has a max current rating of 25A.
D369-R33-NS1
TE Connectivity's D369-R33-NS1 is a Combination Line Connector with 3 contacts, rated at 500V and 5A. With a body size of 0.421" x 0.187" x 0.845", it is designed for applications requiring a polarized, preassembled female connector with crimp termination.
TE Connectivity's DTP06-4S is a 1.364" x 0.868" x 0.96" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A signal current. It has a UL flammability rating of 94V-0, operates b/w -55°C to 125°C, and features a polarized design suitable for cable mounting applications.
2-1971775-3
TE Connectivity 2-1971775-3 is a Combination Line Connector with dimensions of 1.083" x 0.907" x 0.907". Rated for 600V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -55 to 105 °C. Ideal for applications requiring a male SQ PIN-SKT contact style, such as panel mounting in UL-standardized systems.
68503-1602
68503-1602 by Molex is a Combination Line Connector with 16 contacts, 2 rows loaded. It has dimensions of 1.589" x 0.855" x 1.303" and uses polyester insulator material for commercial applications in cable mounting with crimp termination.
54200206
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; No. of Rows Loaded: 1; Filter Feature: NO;
AT04-2P-GRN
The Amphenol AT04-2P-GRN is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S-GRN connectors, using crimp termination method.
DTM04-08PA-EE04
TE Connectivity's DTM04-08PA-EE04 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
DT04-3P-P007
TE Connectivity's DT04-3P-P007 is a 1.89"x1.732"x.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 13A signal current. Operating from -55 to 125°C, it has a UL94V-0 flammability rating and features a polarized design for secure connections in cable mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5055650301
Molex 5055650301 is a 0.226" x 0.148" x 0.122" combination line connector with polyester insulator. It operates b/w -40°C to 105°C, UL certified, and has 3 female contacts for cable mounting via crimp termination. Ideal for various electronic applications requiring reliable connectivity.
5055650201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Material: POLYESTER;
5055650401
Molex 5055650401 is a Combination Line Connector with 0.276"x.148"x.122" dimensions, made of POLYESTER for -40 to 105°C temp range. It has 4 contacts, UL standard, FEMALE gender, RECEPTACLE style for CABLE mounting and CRIMP termination. Ideal for various electronic applications.
5055650601
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Filter Feature: NO; Body Width: .148 inch;
5055650701
The Molex 5055650701 is a combination line connector with dimensions of 0.423" x 0.148" x 0.122". It has a polyester insulator and can operate in temperatures ranging from -40°C to 105°C. This female receptacle connector has 7 contacts and is commonly used for cable mounting applications.
5055680271
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Additional Features: POLARIZED; Termination Type: SURFACE MOUNT;
5055671071
Molex 5055671071 is a Combination Line Connector with dimensions 0.62" x 0.154" x 0.165". It has 10 contacts, rated at 1.5A for signal current. Ideal for board mounting applications, it uses surface mount termination and operates b/w -40°C to 105°C.
5055670681
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -40 Cel; Body Length: .423 inch;
5055671681
The Molex 5055671681 is a combination line connector with dimensions of 0.915" x 0.154" x 0.165". It has 16 contacts and is made of glass-filled polyamide. This surface mount plug connector is UL certified and commonly used in board mounting applications.
5055680471
Molex 5055680471 is a Combination Line Connector with 0.324" x 0.151" x 0.165" dimensions. Made of GLASS FILLED POLYAMIDE, it has 4 contacts and UL 94V-0 flammability rating. Ideal for board mounting, surface mount termination, and male contact gender in plug style applications.
5055681071
The Molex 5055681071 is a combination line connector with dimensions of 0.62" x 0.152" x 0.165". It has a max operating temperature of 105°C and can handle a rated current of 1.5A. This surface mount connector is commonly used in board mounting applications.
5055670281
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Maximum Operating Temperature (Cel): 105; Body Length: .226 inch;
5055681081
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Empty Shell: NO; Body Length: .62 inch;
5055651401
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: NOT APPLICABLE;
5055680571
Molex 5055680571 is a male plug combination line connector with 5 contacts. It features TIN BISMUTH contact finish, GLASS FILLED POLYAMIDE insulator material, and UL 94V-0 flammability code. Ideal for surface mount board applications requiring compact 0.374" x 0.151" x 0.165" dimensions.
5055681471
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Reference Standard: UL;
5055650901
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5055651101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mixed Contacts: NO; Body Length: .62 inch;
5055651201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 105; Termination Contact Finish: NOT APPLICABLE; Termination Type: CRIMP;
5055680771
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .472 inch; Body Depth: .165 inch; No. of Rows Loaded: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved