Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT06-3S-P032 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with crimp termination.
Median Price
$3.465
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$1.720
100+ parts
-
1k+ parts
10k+ parts
$1.590
Mouser Electronics
$3.250
$2.520
$2.450
$1.890
DigiKey
$3.330
$2.404
$2.044
$1.892
TE Connectivity
$3.450
$2.820
$1.800
RS Americas
$3.480
$2.680
$2.370
RS (Exports)
$3.510
Farnell
$4.414
$2.899
$2.356
Newark
$4.660
$4.100
$3.930
Element14
$4.910
TTI
$3.660
$3.520
$3.430
TTI Europe
$2.725
$2.361
Verical
$2.735
Digiode
$1.634
VNN
Nova Conductors
$2.495
Component Electronics Inc.
$3.080
$2.310
$2.000
CustomConnectorKits
$3.600
DF Sales Co.
$4.000
Maritex
$5.301
$2.719
$2.050
LJR Electronics
Vyrian
Electro Sonic
$2.430
$2.340
NAC Semi
$3.120
$2.880
Extreme Components
IBS Electronics
$2.923
$2.534
$2.239
Resion
Semicontronic
$1.460
$1.424
$1.416
Corphita
$1.548
Advanced Electronics
$2.104
$1.999
Aranea Global
$2.445
$2.347
Argo Parts USA
$2.470
Continental Prestige Electronics
$2.830
$1.960
Allen Electronics Distributors
$3.740
$3.560
$3.390
Aztec Data Supply Inc.
$5.050
Perfect Parts
Robosynatics
Lucentia Tech
$7.089
Assy Fe
Resion (Excess)
The compact body length makes this connector suitable for tight spaces and ensures a more streamlined connection setup.
The high rated voltage allows for reliable performance and compatibility with various electrical systems.
The use of glass-filled polyamide as the insulator material ensures durability and resistance to heat and wear, making it a reliable choice for long-term use.
The high maximum operating temperature ensures that the connector can withstand elevated temperatures during operation without compromising performance.
The cable mounting type offers flexibility in installation and allows for easy connection to cables, making it a versatile choice for various applications.
Combination Line Connectors DT06-3S-P032 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT06-3S-P032 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - DT - new tooling 28/DEC/2020
PCN Packaging - DT0y - packaging chg 28/JUN/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
SMBJ18CA
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Rectron
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358AN
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Intersil
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
HVSL800062A135
Amphenol
Amphenol's HVSL800062A135 is a 3.185" x 1.953" x 3.169" combination line connector with polyethylene insulator, rated for -40 to 125°C. It has UL94V-0 flammability code, supports 180A signal current, and features crimp termination for male contacts. Ideal for cable mounting applications per EN and UL standards.
AT06-6S-KIT01
The Amphenol AT06-6S-KIT01 is a 2-row combination line connector with 6 contacts, rated for 13A signal current. It has a compact body size of 0.98" x 0.717" x 1.28", made of polyethylene insulator material. Ideal for cable mounting applications, it operates b/w -55°C to 125°C temperature range.
AT04-6P-SR02BLK
AT04-6P-SR02BLK by Amphenol is a combination line connector with dimensions of 0.827" x 0.961" x 2.299". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This male receptacle connector is commonly used in cable applications, offering 6 contacts and a rated signal current of 13A.
DT04-08PA-E008
TE Connectivity's DT04-08PA-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
1473416-1
TE Connectivity's 1473416-1 is a Combination Line Connector with dimensions of 1.266" x 1.268" x 1.36". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40°C to 125°C. With a total of 26 contacts, it is used in cable mounting applications at mains connector ratings of 115/230VAC.
DT06-2S-EP11
TE Connectivity's DT06-2S-EP11 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, signal current of 13A, and female contact gender. Ideal for cable mounting applications requiring crimp termination with strain relief.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
12065686
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Total No. of Contacts: 4; Insulator Material: POLYBUTYLENE TEREPHTHALATE;
DRC22-50P01
TE Connectivity's DRC22-50P01 is a 2.25" x 3.293" x 1.187" combination line connector with 50 contacts, rated at 250V and 7.5A for signal current. It operates b/w -55°C to 125°C, UL certified with a flammability rating of 94V-0, ideal for board mounting applications requiring polarized male connectors with solder termination.
1-770968-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Manufacturer Series: 770968; UL Flammability Code: 94V-0;
ATM04-2P-P007
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
AT04-6P-RD01
The Amphenol AT04-6P-RD01 is a Combination Line Connector with 6 contacts, rated at 13A signal current. Featuring a body size of 0.961" x 0.827" x 1.886", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a receptacle shell style and male contact gender, suitable for various electronic systems.
DTP06-2S-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: RND PIN-SKT; No. of Rows Loaded: 1; Total No. of Contacts: 2;
AT06-6S-OMBLK
The Amphenol AT06-6S-OMBLK is a combination line connector with 6 contacts, rated for 13A signal current. It has a compact body size of 0.882" x 0.874" x 1.815", suitable for cable mounting applications. With an operating temperature range from -55°C to 125°C, it uses crimp termination and mates with AT06-6P-OMBLK connectors.
1-1718644-1
TE Connectivity 1-1718644-1 is a Combination Line Connector with dimensions of 0.748" x 1.043" x 0.583". Rated for 12V, it has GLASS FILLED POLYAMIDE insulator and operates b/w -40 to 130 °C. Ideal for applications requiring a polarized connector with 25A signal current rating.
12065287
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mixed Contacts: NO; DIN Conformance: NO;
DT04-2P-RT02
TE Connectivity's DT04-2P-RT02 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C. It has UL94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring crimp termination with strain relief.
194330013
Molex
Molex 194330013 is a 0.935" long Combination Line Connector with 2 contacts, male gender, and crimp termination. It offers high insulation resistance of 20MOhm and low contact resistance of 30mOhm. Ideal for commercial applications with operating temperatures from -40 to 120°C.
DT04-4P-CE01
TE Connectivity's DT04-4P-CE01 is a Combination Line Connector with 4 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL certification and strain relief mounting option.
AT04-2P
The Amphenol AT04-2P is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S connectors, using crimp termination for male contact pins.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT06-3S-C015
TE Connectivity's DT06-3S-C015 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL94V-0 flammability code and crimp termination.
DT06-6S
TE Connectivity's DT06-6S is a 6-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications in commercial settings due to its durability, polarization key feature, and UL reference standard compliance.
DT06-2S-CE06
TE Connectivity's DT06-2S-CE06 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, 13A signal current rating, and is ideal for cable mounting applications.
DT06-3S
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: DT; Body or Shell Style: PLUG; MIL Conformity: NO;
TE Connectivity's DT06-3S is a 3-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications, this female connector features nickel termination finish and glass-filled polyamide insulator material.
DT06-2S-E008
TE Connectivity's DT06-2S-E008 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
DT06-2S-C015
TE Connectivity's DT06-2S-C015 is a 1.118" x 0.591" x 0.621" combination line connector with 250V rated voltage and -55 to 125°C operating temperature range. Featuring glass-filled polyamide insulator, it has 13A signal current rating and UL flammability code of 94V-0. Ideal for cable mounting applications, this polarized connector offers crimp termination and female contact gender.
DT06-6S-CE06
TE Connectivity's DT06-6S-CE06 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-2S-CE05
TE Connectivity's DT06-2S-CE05 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 13A signal current capacity. Ideal for cable mounting applications requiring crimp termination.
DT06-2S
TE Connectivity's DT06-2S is a 1.118" combination line connector with insulation resistance of 1000000000 ohm, rated voltage of 250V, and operating temperature range from -55 to 125 °C. It features a glass-filled polyamide insulator and is ideal for commercial applications requiring a durable, polarized female connector with crimp termination.
DT06-12SA-CE06
TE Connectivity's DT06-12SA-CE06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
DT06-12SA-E008
TE Connectivity's DT06-12SA-E008 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-12SA-P012
TE Connectivity's DT06-12SA-P012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-4S-E008
TE Connectivity's DT06-4S-E008 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL flammability rating of 94V-0.
DT06-12SA-C015
TE Connectivity's DT06-12SA-C015 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
DT06-2S-P012
TE Connectivity's DT06-2S-P012 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C operating temperatures. It features a polarized design, UL certification, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a female plug contact style with strain relief option.
DT06-12SA
TE Connectivity's DT06-12SA is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL certification and polarization key for secure connections.
DT06-3S-E008
TE Connectivity's DT06-3S-E008 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features 3 contacts, UL94V-0 flammability rating, and supports up to 13A signal current. Ideal for cable mounting applications requiring crimp termination and polarization keying.
DT06-12SA-CE10
The TE Connectivity DT06-12SA-CE10 is a Combination Line Connector with dimensions of 1.218" x 0.716" x 1.597". It has a rated voltage of 250V, UL Flammability Code of 94V-0, and can handle up to 13A current. Ideal for applications requiring a polarized, female plug connector with strain relief mounting for cables.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved