Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-30-0200 is a rectangular power connector with 20 contacts, made of brass and polyamide66. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
Median Price
$3.094
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Newark
1+ parts
$0.608
100+ parts
1k+ parts
10k+ parts
-
Heilind Electronics
$3.069
$2.582
$2.427
Interstate Connecting
$3.144
$2.757
$2.489
Master Electronics
$3.366
$3.060
$2.840
$2.410
Arrow
$3.395
Mouser Electronics
$4.270
$3.840
$3.400
DigiKey
$5.130
$3.588
$2.973
Chip1Stop
$2.680
$2.300
$1.840
Verical
$2.925
$2.531
$2.067
Powell Electronics
$3.120
$2.890
TTI Europe
$2.472
$2.286
TTI
$2.580
$2.350
NEP Electronics
DF Sales Co.
$0.400
Digiode
$0.578
Bristol Electronics
$2.850
$1.767
$0.941
Nova Conductors
$2.910
Component Electronics Inc.
$3.850
$2.880
$2.500
TME
$4.160
$3.150
VNN
ACDS - Activité Composants Distribution Service
Dan-Mar Components
NAC Semi
$2.750
$2.550
IBS Electronics
$3.107
Vyrian
Rutronik
$1.600
$1.410
Prism Electronics
Electronic Expediters
Corel Iberica Componentes, S.L.
Jameco Electronics
Semi Source
Resion
J & M Industries LLC
Connector Distribution Corp
Right Parts Inc.
Semicontronic
$0.520
$0.507
$0.504
Corphita
$0.547
Andel Nordic
$1.455
$1.397
Bastille Electronics
$2.764
$2.626
$2.590
Argo Parts USA
Aztec Data Supply Inc.
$2.933
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Assy Fe
Abacus Technologies
Continental Prestige Electronics
Eastek
Cyclops Electronics Ltd (Excess)
The compact size of the body allows for efficient use of space in any application.
High insulation resistance ensures reliable and safe operation of the power connector.
The high dielectric voltage rating provides effective insulation and prevents electrical breakdown.
The tin over nickel finish on the termination contacts ensures good conductivity and corrosion resistance.
Polyamide66 insulator material offers excellent mechanical strength and thermal resistance.
With a high maximum operating temperature, the connector can withstand elevated temperatures without degradation.
The thick plating thickness provides durability and long-lasting performance.
Brass contacts offer good conductivity and corrosion resistance for reliable connections.
The UL 94V-0 flammability rating ensures that the connector is flame retardant for added safety.
With a high number of contacts, this connector can handle multiple power connections efficiently.
Power Connectors 39-30-0200 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
39-30-0200 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Copper/Nickel Plating 01/Aug/2011 Reflow Matte Tin Plating 27/Jul/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - 00390 Series 13/Oct/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sensitron Semiconductor
Littelfuse
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Protek Devices
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
39-29-1107
Molex
Molex 39-29-1107 is a rectangular power connector with 10 contacts, made of brass and polyamide66. It has a body length of 1.268", width of 0.393", and depth of 0.764". Suitable for board mounting, it operates b/w -40°C to 105°C, with matte tin over nickel termination finish.
1053101108
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
10-84-4020
The Molex 10-84-4020 is a RECTANGULAR POWER CONNECTOR with 2 contacts, made of PHOSPHOR BRONZE. It has an Insulation Resistance of 1Gohm and Dielectric Withstanding Voltage of 500VAC. Ideal for BOARD mounting applications with SOLDER termination, it operates b/w -55 to 105°C.
39-30-0040
Molex 39-30-0040 is a rectangular power connector with 4 contacts, featuring brass contact material and polyamide66 insulator. Withstanding voltage of 1500VAC, it has a durability of 30 cycles and operates b/w -40 to 105°C. Ideal for board mounting applications requiring reliable power connections in commercial settings.
43650-0415
The Molex 43650-0415 Power Connector features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage of 1500VAC. Ideal for board mounting applications with a temperature range from -40 to +105°C, this connector offers durability with 30 cycles and reliability for commercial use.
1651203-1
TE Connectivity
TE Connectivity's 1651203-1 is a RECTANGULAR POWER CONNECTOR with 24 contacts, rated at 35A and 250V. Featuring POLYBUTYLENE TEREPHTHALATE insulation material, it offers high durability with a temperature range of -40 to 105 °C. Ideal for commercial applications requiring reliable power connections.
39-29-6028
The Molex 39-29-6028 is a rectangular power connector with 2 contacts, TIN over nickel finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high durability and reliability under commercial standards.
DF22-2S-7.92C(28)
Hirose Electric
DF22-2S-7.92C(28) by Hirose Electric is a Power Connector with 0.61"x.455"x.787" dimensions, POLYAMIDE insulator, and 85°C max operating temp. It has 2 contacts for FEMALE crimp termination and is suitable for commercial applications requiring a UL94V-0 flammability rating.
39-30-0060
Molex 39-30-0060 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications, it has a durable design with male contact gender and solder termination type.
43045-1000
The Molex 43045-1000 is a rectangular power connector with 10 contacts, featuring bright tin termination finish and LCP insulator material. It has a mating contact pitch of 0.118", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
10-08-1101
Molex 10-08-1101 is a rectangular power connector with 0.2" mating contact pitch, suitable for board mounting. It features 1000000000 ohm insulation resistance, operates b/w -40 to 80 °C, and has a tin termination finish. Ideal for commercial applications requiring reliable power connections.
1-350944-0
TE Connectivity 1-350944-0 is a Power Connector with dimensions 1.05" x 0.36" x 0.36". It offers high insulation resistance of 100M ohm, matte tin termination finish, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings with a rated current of 19A.
39-01-2086
The Molex 39-01-2086 is a rectangular power connector with a body length of 0.789 inch, body width of 0.46 inch, and body depth of 0.94 inch. It has an insulation resistance of 1000000000 ohm and a dielectric withstand voltage of 2200VAC. This connector is commonly used in panel mounting applications and has a durability of 30 cycles.
43650-0301
Molex 43650-0301 is a rectangular power connector with 3 contacts, 0.118" pitch, and 0.172" body width. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring reliable commercial-grade power connections.
75757-1261
Molex 75757-1261 is a RECTANGULAR POWER CONNECTOR with Matte Tin (Sn) finish. It has 12 contacts made of COPPER ALLOY, UL94V-0 rated. Ideal for BOARD mounting, SOLDER termination, and male contact gender in power applications.
34576-0703
Molex 34576-0703 is a RECTANGULAR POWER CONNECTOR with 56 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in applications requiring high-power connections.
39-01-4043
The Molex 39-01-4043 is a rectangular power connector with 4 contacts, made of POLYAMIDE66 material. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for commercial applications, it offers crimp termination and durability up to 30 cycles.
1-1954289-1
TE Connectivity's 1-1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
1-640445-0
TE Connectivity 1-640445-0 is a rectangular power connector with 10 contacts, rated at 7A. Featuring a mating contact pitch of 0.156", it has an insulation resistance of 5Gohm and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and polarization key feature.
2070170014
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-30-1020
The Molex 39-30-1020 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. The connector has a durable design with brass contacts and polyamide66 insulator material.
39-30-1040
Molex 39-30-1040 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability standards from CSA, TUV, and UL.
39-30-1060
The Molex 39-30-1060 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It has a temperature range from -40 to 105°C, suitable for board mounting applications requiring durability and reliability.
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-30-3036
Molex 39-30-3036 is a rectangular power connector with matte tin finish. It features 3 contacts, brass contact material, and nylon66 insulator. Ideal for board mounting applications requiring press fit termination with right angle mounting style.
39-30-0020
39-30-1039
39-30-0080
39-30-3045
The Molex 39-30-3045 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings, it offers durability up to 30 cycles with operating temperatures ranging from -40 to 105°C.
39-30-1122
39-30-1049
Molex 39-30-1049 is a rectangular power connector with 4 contacts made of brass and tin/copper finish. It uses POLYAMIDE66 insulator material, suitable for board mounting via solder termination. This male connector has UL94V-2 flammability rating, ideal for power applications requiring reliable connections.
39-30-0100
39-30-1080
The Molex 39-30-1080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. Ideal for commercial reliability requirements.
39-30-3035
The Molex 39-30-3035 is a rectangular power connector with 3 contacts, made of brass with matte tin finish. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting in commercial applications. Operating temperature range from -40°C to 105°C makes it versatile for various electronic devices.
39-30-1100
39-30-2030
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-30-3038
Molex 39-30-3038 is a rectangular power connector with 3 contacts, made of brass and tin with nickel barrier. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting applications. UL certified with 94V-0 flammability code, it offers reliable commercial use in various electronic devices.
39-30-1022
Molex 39-30-1022 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring matte tin finish and polyamide66 insulator material, it offers high insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range of -40 to +105 °C.
39-30-1042
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved