Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 39-28-9088 is a rectangular power connector with 8 contacts, rated at 9A signal current. Featuring a mating contact pitch of 0.165", it has an insulation resistance of 1Gohm and can withstand up to 1500VAC. Ideal for commercial applications, this connector offers durability with a min withdrawal force of 3.1136N and operates b/w -40°C to +105°C temperatures.
Median Price
$2.524
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Sager
1+ parts
$1.500
100+ parts
-
1k+ parts
$1.450
10k+ parts
Adafruit Industries
$1.891
$1.872
Heilind Electronics
$2.115
$1.780
$1.673
Interstate Connecting
$2.498
$2.191
$1.978
Chip1Stop
$2.560
Avnet
$2.565
$2.201
Distrelec
$3.444
$2.158
$1.896
Mouser Electronics
$3.850
$2.770
$2.490
$2.330
Arrow
$3.914
Element14
$3.995
$3.772
$3.259
DigiKey
$4.000
Master Electronics
$2.850
$2.300
Powell Electronics
$2.550
$2.430
$2.200
TTI
$1.750
$1.630
$1.570
PEI Genesis
Future Electronics
$0.740
NEP Electronics
Farnell
$2.030
$1.960
Verical
$2.127
TTI Europe
$1.569
$1.515
Digiode
$1.425
Nova Conductors
$1.840
TestEquity
$2.110
TME
$4.140
$2.700
Sensible Micro Corp
Semtec, LLC
IBS Electronics
$1.975
$1.863
$1.488
Vyrian
VNN
Carlin Systems, Inc.
Global Solutions Electronics Company
Inventory MP
Prism Electronics
ACDS - Activité Composants Distribution Service
Bristol Electronics
Component Sense
ComSIT Distribution GmbH
Semicontronic
$1.270
$1.238
$1.232
Corphita
$1.350
Argo Parts USA
Netroflash
$1.803
Advanced Electronics
$1.796
Andel Nordic
$2.276
$2.185
Continental Prestige Electronics
$3.060
$1.810
$1.710
Aztec Data Supply Inc.
$8.517
Microchip USA
$15.340
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
The close proximity of mating contacts ensures a secure and reliable connection.
High insulation resistance helps prevent electrical leakage and ensures safety.
The high dielectric strength allows the connector to withstand high voltages without breakdown.
Brass contacts offer good conductivity and durability for long-term performance.
Board mounting option provides easy and secure installation on PCBs.
Solder termination ensures a strong and reliable connection between the connector and PCB.
Power Connectors 39-28-9088 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-28-9088 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Cancel Product Improvement 09/Feb/2022 Mult Devs Product Improvement 17/Feb/2022
PCN Assembly/Origin - Multiple Supplier Adding Supplier 18/Aug/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
NXP Semiconductors
Transys Electronics
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Micropac Industries
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Plessey Semiconductors Discrete Components Div
Other Transistors;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
2004561212
Molex
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
350789-1
TE Connectivity's 350789-1 is a RECTANGULAR POWER CONNECTOR with 0.25" Mating Contact Pitch, 100M ohm Insulation Resistance, and -40 to 105°C Operating Temperature range. Ideal for board mounting applications requiring a reliable power connection with 12A signal current rating.
43020-0601
Molex 43020-0601 is a rectangular power connector with 6 contacts, PBT-POLYESTER insulator, and UL 94V-0 flammability rating. It has a body depth of 0.665 inch and is suitable for commercial applications requiring a male crimp contact termination on cables.
1648117-1
TE Connectivity's 1648117-1 is a rectangular power connector with mixed contacts, rated for 250V and 35A signal current. Made of PBT, it operates b/w -40 to 105°C. Ideal for panel mounting applications requiring a UL-rated, flame-retardant female receptacle with 22 contacts in S16P6 arrangement.
2204581-1
TE Connectivity's 2204581-1 is a rectangular power connector with rated voltage of 400V and UL flammability code of 94V-0. It has insulator material made of glass filled liquid crystal polymer, operating temperature range from -40 to 105°C, and plating thickness of 118.11u. Ideal for board mounting applications, this male connector with press fit termination supports a signal current rating of 35A.
3-794618-8
TE Connectivity 3-794618-8 is a power connector with 0.118" contact pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, it features POLYAMIDE insulation, UL94V-0 flammability rating, and durable construction for commercial use.
2092080004
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
B08P-VL
J S T Mfg
B08P-VL by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 8 contacts, made of COPPER ALLOY and POLYAMIDE66 insulator. It features Tin (Sn) termination contact finish, ideal for board mounting applications requiring a male connector with UL Flammability Code 94V-0.
39-01-4046
Molex 39-01-4046 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is suitable for commercial applications requiring durable crimp termination connectors.
1053081206
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
43650-0201
The Molex 43650-0201 is a rectangular power connector with a mating contact pitch of 0.118". Featuring matte tin over nickel termination, it has a body width of 0.172" and insulator made of glass-filled liquid crystal polymer. Ideal for board mounting applications, this connector offers reliable performance in commercial settings.
39-30-2042
Molex 39-30-2042 is a RECTANGULAR POWER CONNECTOR with 4 contacts, Matte Tin finish. Made of POLYAMIDE66, it has UL94V-0 flammability rating. Ideal for board mounting, solder termination, and male contact gender applications.
39-01-2081
Molex 39-01-2081 is a rectangular power connector with 8 contacts, POLYAMIDE insulator, and UL94V-2 flammability rating. It has a mating contact pitch of 0.165", operates b/w -40 to 105°C, and uses crimp termination for wire sizes ranging from 28 to 16 AWG. Ideal for commercial applications requiring durable connectors with polarization key and center mating row spacing.
43045-0806
The Molex 43045-0806 is a rectangular power connector with 8 contacts, LCP insulator, and tin finish. It operates b/w -40 to 105°C, suitable for commercial applications. With a male contact gender and right-angle mounting style, it offers high insulation resistance of 1Gohm.
503148-0890
503148-0890 by Molex is a rectangular power connector with 8 contacts, 2 rows, and mating contact pitch of 0.059". It has a body length of 0.406", insulation resistance of 500M ohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring surface mount termination in commercial settings.
34576-1903
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Mounting Type: CABLE; Contact Material: NOT SPECIFIED;
43650-0316
The Molex 43650-0316 power connector features a body length of 0.498", insulation resistance of 1G ohm, and matte tin termination finish. Ideal for board mounting with a temperature range from -40 to 105 °C, it has a contact arrangement of S0P3 and durability of 30 cycles.
2008750006
1-1123309-2
TE Connectivity 1-1123309-2 is a rectangular power connector with 4 contacts, rated at 45A. Featuring a body length of 1.156", it has an insulation resistance of 1Gohm and operates b/w -55 to 105°C. Ideal for board mounting applications with solder termination, this connector offers durability of 25 cycles and UL certification.
39-29-0023
Molex 39-29-0023 is a rectangular power connector with 2 contacts, made of brass and polyamide66. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-28-1043
Molex 39-28-1043 is a rectangular power connector with 4 contacts, TIN over copper finish. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability, it meets CSA, TUV, and UL standards.
39-28-1023
Molex 39-28-1023 is a rectangular power connector with 0.25"x.38"x.5" dimensions, suitable for board mounting. It features 1000000000 ohm insulation resistance, 2200VAC dielectric voltage, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring durable male contacts with solder termination and natural insulator color.
39-28-1083
Molex 39-28-1083 is a rectangular power connector with 8 contacts, TIN over copper finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability meeting CSA, TUV, UL standards.
39-28-1063
Molex 39-28-1063 is a rectangular power connector with 6 contacts, TIN COPPER finish, and POLYAMIDE66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C, and durability of 30 cycles. Ideal for board mounting applications in commercial settings due to its reliability and UL94V-2 flammability rating.
39-28-1103
The Molex 39-28-1103 is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and locking options.
39-28-8040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-28-1123
The Molex 39-28-1123 is a rectangular power connector with 12 contacts, made of brass and tin copper finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability meeting CSA and UL standards.
39-28-8020
Molex 39-28-8020 is a rectangular power connector with 2 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications due to its durability and reliability meeting CSA, TUV, UL standards.
39-28-1203
Molex 39-28-1203 is a rectangular power connector with 20 contacts, rated at 13A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and UL94V-2 flammability rating.
39-28-8060
Molex 39-28-8060 is a rectangular power connector with 6 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
39-28-1143
Molex 39-28-1143 is a rectangular power connector with 14 contacts, made of brass and tin/copper finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications due to its durability, reliability, and UL flammability rating.
39-28-8080
39-28-8100
39-28-1243
The Molex 39-28-1243 is a rectangular power connector with a body length of 2.07", body width of 0.38", and body depth of 0.5". It is commonly used in board mounting applications, has a max operating temperature of 105°C, and offers excellent insulation resistance of 1GΩ.
39-28-8140
The Molex 39-28-8140 is a rectangular power connector with a body length of 1.2", body width of 0.38", and body depth of 0.5". It has an insulation resistance of 1,000,000,000 ohm and can withstand a dielectric voltage of 2200VAC. This connector is commonly used in board mounting applications for power connections.
39-28-9108
39-28-8240
39-28-1163
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-28-8160
39-28-9048
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved