Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43045-0820 is a rectangular power connector with 8 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 1000VAC. Ideal for board mounting applications, it has a temperature range from -40 to +105°C and durable for 30 cycles.
Median Price
$2.642
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Newark
1+ parts
$0.608
100+ parts
1k+ parts
10k+ parts
-
Mouser Electronics
$4.290
$2.510
$2.450
DigiKey
$4.700
$3.288
Master Electronics
$2.720
$2.140
Verical
$2.920
$2.320
TTI
$1.940
$1.820
NEP Electronics
Avnet
$2.684
Farnell
$1.980
TTI Europe
$2.206
$2.033
Chip1Stop
$2.600
Digiode
$0.578
Nova Conductors
$2.640
TestEquity
$2.930
Vyrian
NAC Semi
$3.620
$3.340
EMSNET
IBS Electronics
$3.618
$2.875
Rutronik
$1.480
PC Components Company LLC
Q Components
VNN
Bristol Electronics
$1.875
Pegasus Components GmbH
J2 Sourcing AB
ComSIT Distribution GmbH
Resion
Semicontronic
$0.520
$0.507
$0.504
Corphita
$0.547
Argo Parts USA
Continental Prestige Electronics
$2.587
Netroflash
Aztec Data Supply Inc.
$4.472
Andel Nordic
$7.692
$7.385
Perfect Parts
Assy Fe
GreenTree Electronics
Eastek
Kepictronics
Abacus Technologies
High insulation resistance ensures excellent electrical isolation, making this connector suitable for reliable power connections.
With a compact body width, this connector is ideal for applications with limited space constraints.
The high dielectric voltage rating makes this connector suitable for high voltage applications, ensuring safe and reliable operation.
The durable finish on the termination contacts provides excellent conductivity and corrosion resistance, ensuring long-lasting performance.
The shallow body depth of this connector allows for easy installation in tight spaces.
The high-quality insulator material offers excellent mechanical strength and thermal stability, ensuring reliable performance in demanding environments.
With a high maximum operating temperature, this connector is suitable for use in a wide range of temperature conditions.
The low minimum operating temperature ensures that this connector can be used in cold environments without sacrificing performance.
The connector type is designed specifically for power applications, providing a secure and reliable connection.
The brass contact material offers excellent conductivity and durability, ensuring reliable power transmission.
The UL 94V-0 flammability rating indicates that this connector meets stringent safety standards, making it a reliable choice for power applications.
The black insulator color provides a sleek and professional appearance, perfect for a wide range of applications.
Meeting UL standards ensures that this connector is manufactured to high quality and safety standards.
With a large number of contacts, this connector can handle multiple power connections, making it versatile and efficient.
Having only one connector simplifies installation and reduces the risk of connection errors.
The specific contact arrangement ensures proper alignment and connectivity, making this connector easy to install and use.
With a durability rating of 30 cycles, this connector is built to withstand repeated use without compromising performance.
The board mounting type allows for easy and secure installation on PCBs, ensuring stable connections.
The surface mount termination type simplifies installation and provides a reliable connection in various applications.
The male contact gender is compatible with various female connectors, offering flexibility in design and connectivity.
Low contact resistance ensures efficient power transmission and minimal energy loss, making this connector energy-efficient.
The plug-style body or shell design offers a secure and convenient connection for power applications.
The straight mounting style simplifies installation and alignment, ensuring a reliable connection.
The square pin socket contact style ensures a secure and stable connection, reducing the risk of disconnection.
The locking mounting option provides added security and stability, preventing accidental disconnections.
The commercial reliability rating indicates that this connector is suitable for a wide range of commercial applications, ensuring consistent performance.
Power Connectors 43045-0820 attributes and parameters. Explore more Power Connectors devices from Molex
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43045-0820 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Production Transfer 12/Jul/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Harris Semiconductor
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
39-01-2065
Molex
Molex 39-01-2065 is a rectangular power connector with 6 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a 0.543" body length, 0.46" width, and 0.77" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
43640-0800
The Molex 43640-0800 is a rectangular power connector with 8 contacts, rated for 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications, it offers durability up to 30 cycles with UL flammability rating of 94V-0.
39-01-2021
The Molex 39-01-2021 is a rectangular power connector with 0.425" body length, 0.46" width, and 0.94" depth. It has an insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector features a POLYAMIDE insulator and operates b/w -40 to 105°C temperatures.
UMPS-10-03.5-L-V-S-W-TR
Samtec
UMPS-10-03.5-L-V-S-W-TR by Samtec is a power connector with dimensions of 0.986" x 0.244" x 0.163". It features Liquid Crystal Polymer insulator, operating temp range of -55 to 125°C, and 10 contacts. Ideal for board mounting applications requiring female socket connectors with blade pin contact style.
1-316132-2
TE Connectivity
TE Connectivity 1-316132-2 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYESTER insulator. It has SOLDERABLE RETENTION CLIPS for BOARD mounting, rated at 15A mains connector rating. Ideal for applications requiring polarized connectors with 5 contacts and UL94V-0 flammability code.
15-24-7100
15-24-7100 by Molex is a rectangular power connector with 10 contacts, featuring a body length of 0.87", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting applications, it has a contact material of brass and insulator material of Polyamide66.
31068-1011
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
2008750005
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1648168-1
The TE Connectivity 1648168-1 is a RECTANGULAR POWER CONNECTOR with 40 contacts, rated for 750V and 75A. It has a temperature range of -40 to 105 °C and UL94V-0 flammability rating. Ideal for power applications requiring high voltage and current capabilities in industrial settings.
428193213
Molex 428193213 power connector features 1.33" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage withstand. Ideal for commercial applications with -40 to 105°C operating range, UL-rated with matte tin finish and brass contacts for reliable signal current up to 50A on a single male connector.
43020-0600
The Molex 43020-0600 is a rectangular power connector with a body depth of 0.665 inch. It has an insulator material made of PBT-POLYESTER and can operate in temperatures ranging from -40 to 105 °C. This connector is commonly used for power connections in commercial applications.
DF22L-2P-7.92DSA(05)
Hirose Electric
DF22L-2P-7.92DSA(05) by Hirose Electric is a power connector with 2 contacts, Tin/Copper finish, and GLASS FILLED POLYAMIDE insulator. It has a temperature range of -35 to 85°C and UL94V-0 flammability rating. Ideal for board mounting applications requiring male blade pin-skt connectors.
0430450818
Molex 0430450818 is a rectangular power connector with 8 contacts made of brass. It features surface mount termination and polyethylene insulator material. Ideal for board mounting applications requiring male contact gender with TIN over nickel finish.
105309-1103
350209-1
TE Connectivity's 350209-1 is a rectangular power connector with 0.2" mating contact pitch, suitable for board mounting. It features a 12A signal current rating, POLYAMIDE insulator material, and operates b/w -55 to 105°C. Ideal for commercial applications requiring durable power connections.
1-480698-0
TE Connectivity 1-480698-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 0.58" x 0.55" x 1.08" dimensions, operates b/w -55 to 105 °C, and offers 1000000000 ohm insulation resistance. Ideal for commercial applications requiring durable, crimped cable termination at 115/230VAC mains connector rating.
6326G1
Anderson Power Products
6326G1 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 2 contacts, UL 94V-0 rated. It features HERMAPHRODITIC contact gender and supports CRIMP AND SOLDER termination. Ideal for cable mounting applications in power systems requiring reliable connectivity.
43045-0602
The Molex 43045-0602 is a rectangular power connector with a body length of 0.518", body width of 0.29", and body depth of 0.482". It is commonly used in board mounting applications, has an insulation resistance of 1GΩ, and can operate at temperatures ranging from -40°C to 105°C.
794184-1
TE Connectivity 794184-1 is a Power Connector with 600V rated voltage, POLYAMIDE insulator, and -55 to 105°C operating temperature range. Ideal for applications requiring a female connector with crimp termination, UL flammability rating of 94V-0, and natural insulator color.
43045-0424
The Molex 43045-0424 is a rectangular power connector with 4 contacts, featuring insulation resistance of 1 Gohm and operating temperatures from -40 to 105°C. It has a body width of 0.29" and depth of 0.39", suitable for board mounting applications with solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43045-0612
The Molex 43045-0612 is a rectangular power connector with 6 contacts, rated for 5A signal current. Featuring bright tin over nickel termination finish, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications, this durable connector with LCP insulator is UL94V-0 compliant.
43045-0400
The Molex 43045-0400 is a rectangular power connector with 4 contacts, featuring bright tin termination finish and glass-filled liquid crystal polymer insulator. It has a temperature range of -40 to 105°C, UL94V-0 flammability rating, and male contact gender. Ideal for board mounting applications requiring durability and reliability in commercial settings.
43045-0600
The Molex 43045-0600 is a rectangular power connector with 6 contacts, featuring bright tin over nickel termination finish. It has a body length of 0.518", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
43045-0412
The Molex 43045-0412 is a rectangular power connector with 4 contacts, featuring tin termination finish and brass contact material. With insulation resistance of 1G ohm, it operates b/w -40 to 105°C. Ideal for board mounting applications, this connector has a durability of 30 cycles and meets CSA, TUV, UL standards.
43045-0800
Molex 43045-0800 is a rectangular power connector with 8 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with bright tin finish and LCP insulator material.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
43045-1012
The Molex 43045-1012 is a rectangular power connector with 10 contacts, rated for 5A signal current. It features LCP insulator material, brass contact material, and tin finish. Ideal for board mounting applications in commercial settings with operating temperatures from -40 to 105°C.
43045-0418
Molex 43045-0418 is a rectangular power connector with 4 contacts, LCP insulator, and brass contact material. It has a dielectric voltage of 1000VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability up to 30 cycles.
43045-0212
The Molex 43045-0212 is a rectangular power connector with 2 rows, rated at 5A signal current. Featuring liquid crystal polymer insulator and bright tin over nickel finish, it offers high durability with 30 cycles. Ideal for board mounting applications in commercial settings, this connector has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C.
43045-0200
Molex 43045-0200 is a rectangular power connector with LCP insulator, brass contacts, and bright tin finish. It has 2 rows, rated for 5A signal current, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
43045-1000
The Molex 43045-1000 is a rectangular power connector with 10 contacts, featuring bright tin termination finish and LCP insulator material. It has a mating contact pitch of 0.118", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-0414
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43045-1018
Molex 43045-1018 is a rectangular power connector with 10 contacts, made of brass and LCP insulator. It has an insulation resistance of 1Gohm, withstands up to 1000VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-1212
Molex 43045-1212 is a rectangular power connector with 12 contacts, rated at 5A signal current. It features liquid crystal polymer insulation, bright tin over nickel finish, and brass contact material. Suitable for board mounting with a mating contact pitch of 0.118", it has an operating temperature range from -40 to 105°C.
43045-0818
The Molex 43045-0818 is a rectangular power connector with 8 contacts, made of LCP material. It has an insulation resistance of 1Gohm and can withstand up to 1000VAC. Ideal for board mounting applications in commercial settings, it features male contact gender with tin finish and nickel barrier.
43045-0401
43045-1200
The Molex 43045-1200 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and bright tin finish contacts.
43045-0618
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
43045-2412
The Molex 43045-2412 is a rectangular power connector with 24 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. It has a body length of 1.561", suitable for board mounting applications with a dielectric voltage rating of 1500VAC. This durable connector, made from LCP material, operates b/w -40°C to +105°C and is ideal for commercial use cases requiring reliable power connections.
43045-0619
The Molex 43045-0619 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used in board mounting applications for commercial reliability, featuring male contact gender and surface mount termination.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved