Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-30-3056 is a rectangular power connector with 5 contacts, POLYAMIDE insulator, and tin finish. It has a dielectric voltage of 1500VAC, operates b/w -40 to 105°C, and offers high durability with 30 cycles. Ideal for board mounting applications requiring reliable male connectors with right-angle mounting style.
Median Price
$0.846
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.816
100+ parts
1k+ parts
10k+ parts
-
Interstate Connecting
$0.831
$0.696
$0.657
Heilind Electronics
$0.853
$0.695
$0.675
Verical
$0.970
$0.940
$0.730
Mouser Electronics
$1.400
$1.180
$0.989
$0.877
DigiKey
$1.610
$1.132
$0.894
$0.775
Chip1Stop
$0.962
$0.911
$0.660
Master Electronics
$1.060
$1.005
Powell Electronics
$0.810
$0.790
Farnell
TTI
$0.840
$0.710
Newark
$0.883
Avnet
$0.732
TTI Europe
$0.495
$0.436
Freelance Electronics
$0.448
$0.470
$0.443
Digiode
Nova Conductors
TME
$0.558
$0.459
Vyrian
NAC Semi
$0.523
IBS Electronics
$0.912
$0.771
PC Components Company LLC
ComSIT Distribution GmbH
VNN
LIBRA Elektronik GmbH
Bristol Electronics
Elcom Components
Atlantic Semiconductor
Prism Electronics
Sensible Micro Corp
EZ Electronic Parts
Corphita
$0.734
Advanced Electronics
Continental Prestige Electronics
$0.824
$0.808
Argo Parts USA
Semicontronic
$0.920
$0.897
$0.892
Aztec Data Supply Inc.
$3.259
Andel Nordic
$3.457
$3.318
Perfect Parts
GreenTree Electronics
$0.545
Eastek
Abacus Technologies
Assy Fe
Robosynatics
$8.855
$8.675
Lucentia Tech
EMSNET (Excess)
The compact body length makes this connector suitable for applications where space is limited.
High insulation resistance ensures reliable and safe operation in various electrical applications.
The high dielectric strength allows this connector to withstand high voltage levels, providing a secure electrical connection.
Tin finish on the termination contact ensures good conductivity and corrosion resistance.
Having 5 contacts allows for multiple connections to be made with this power connector.
Board mounting option provides a secure and stable connection to the circuit board.
Being designed for commercial use, this connector is built to withstand regular use and provide a reliable performance.
Power Connectors 39-30-3056 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
39-30-3056 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Copper/Nickel Plating 01/Aug/2011 Reflow Matte Tin Plating 27/Jul/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Other - Multiple Series Tooling 03/Jul/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Onsemi
03-09-2022
Molex
Molex 03-09-2022 is a rectangular power connector with 0.64" body length and 0.35" width. Made of POLYAMIDE, it has UL 94V-2 flammability rating. Ideal for commercial applications, this plug-style connector features male and female contacts, solder termination, and locking mounting option.
2-282191-1
TE Connectivity's 2-282191-1 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYAMIDE66 insulator. Featuring 3 FEMALE contacts, it is designed for CABLE mounting with WIRE termination. Ideal for power applications requiring reliable and secure connections.
43160-2103
Molex 43160-2103 is a rectangular power connector with 3 contacts, TIN over copper finish. It has a dielectric voltage of 5000VAC and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings with operating temperatures from -40 to 75°C.
PCIH47F300A1/AA
Positronic Industries
PCIH47F300A1/AA by Positronic: Rectangular power connector with 47 contacts, gold flash over nickel finish. Glass-filled polyester insulator, copper alloy contacts. Suitable for board and panel mounting in applications requiring mixed contact types.
78235-1101
Power Connectors; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT APPLICABLE; Termination Contact Finish: MATTE TIN OVER NICKEL;
39-01-2086
The Molex 39-01-2086 is a rectangular power connector with a body length of 0.789 inch, body width of 0.46 inch, and body depth of 0.94 inch. It has an insulation resistance of 1000000000 ohm and a dielectric withstand voltage of 2200VAC. This connector is commonly used in panel mounting applications and has a durability of 30 cycles.
43640-0800
The Molex 43640-0800 is a rectangular power connector with 8 contacts, rated for 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications, it offers durability up to 30 cycles with UL flammability rating of 94V-0.
03-09-1032
Molex 03-09-1032 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 1500VAC and can handle up to 12A signal current. With POLYAMIDE66 insulator material, it operates b/w -40°C to 105°C temperature range.
1-1123722-7
TE Connectivity 1-1123722-7 is a RECTANGULAR POWER CONNECTOR with 7 contacts, rated at 8A and 250V. Featuring POLYAMIDE66 insulation material, it has a dielectric voltage of 1500VAC and operates b/w -25 to 105°C. Ideal for board mounting applications requiring high durability and reliability in commercial settings.
10153466-06LF
Amphenol Communications Solutions
Amphenol's 10153466-06LF is a rectangular power connector with 6 contacts, made of POLYAMIDE66. It has a compact body size of 0.598" x 0.484" x 0.78", UL94V-0 rated for -40 to 105°C. Ideal for cable mounting, it features female crimp contacts and complies with UL standards.
15-06-0040
Molex 15-06-0040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40°C to 105°C, suitable for commercial applications requiring high insulation resistance of 1 Gohm. With solder termination and locking mounting option, it's ideal for panel installations needing reliable female connectors.
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
1723101103
Molex 1723101103 is a rectangular power connector with liquid crystal polymer insulator. It has a rated current of 14A and operates b/w -40 to 120°C. Ideal for board mounting, it features male SQ pin-skt contacts and is UL 94V-0 compliant.
39-30-3036
Molex 39-30-3036 is a rectangular power connector with matte tin finish. It features 3 contacts, brass contact material, and nylon66 insulator. Ideal for board mounting applications requiring press fit termination with right angle mounting style.
DF22-2S-7.92C(28)
Hirose Electric
DF22-2S-7.92C(28) by Hirose Electric is a Power Connector with 0.61"x.455"x.787" dimensions, POLYAMIDE insulator, and 85°C max operating temp. It has 2 contacts for FEMALE crimp termination and is suitable for commercial applications requiring a UL94V-0 flammability rating.
75757-5101
Molex 75757-5101 is a rectangular power connector with 20 contacts made of brass. It features matte tin finish with nickel barrier, UL 94V-0 flammability rating, and male contact gender. Ideal for board mounting applications requiring solder termination.
39-28-8160
The Molex 39-28-8160 is a rectangular power connector with 16 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability meeting CSA, TUV, UL standards.
2002411114
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
350429-1
TE Connectivity 350429-1 is a rectangular power connector with 3 contacts, rated at 12A. Insulation resistance of 100MΩ and operating temperature range from -40 to 105°C make it ideal for commercial applications. With solder termination and natural insulator color, it offers durability of 50 cycles.
691701530002B
Wuerth Elektronik & Kg
691701530002B by Wurth Elektronik is a Power Connector with 0.2" Mating Contact Pitch, 4000VAC Dielectric Withstanding Voltage, and TIN Termination Contact Finish. It features LIQUID CRYSTAL POLYMER Insulator Material and BRASS Contact Material. Ideal for commercial applications requiring a polarized housing with right angle mounting and locking option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-30-1020
The Molex 39-30-1020 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. The connector has a durable design with brass contacts and polyamide66 insulator material.
39-30-1040
Molex 39-30-1040 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability standards from CSA, TUV, and UL.
39-30-1060
The Molex 39-30-1060 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It has a temperature range from -40 to 105°C, suitable for board mounting applications requiring durability and reliability.
39-30-0040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-30-0060
Molex 39-30-0060 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications, it has a durable design with male contact gender and solder termination type.
39-30-0020
39-30-1039
39-30-0080
39-30-3045
The Molex 39-30-3045 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings, it offers durability up to 30 cycles with operating temperatures ranging from -40 to 105°C.
39-30-1122
39-30-1049
Molex 39-30-1049 is a rectangular power connector with 4 contacts made of brass and tin/copper finish. It uses POLYAMIDE66 insulator material, suitable for board mounting via solder termination. This male connector has UL94V-2 flammability rating, ideal for power applications requiring reliable connections.
39-30-0100
39-30-1080
The Molex 39-30-1080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. Ideal for commercial reliability requirements.
39-30-3035
The Molex 39-30-3035 is a rectangular power connector with 3 contacts, made of brass with matte tin finish. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting in commercial applications. Operating temperature range from -40°C to 105°C makes it versatile for various electronic devices.
39-30-1100
39-30-2030
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-30-3038
Molex 39-30-3038 is a rectangular power connector with 3 contacts, made of brass and tin with nickel barrier. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting applications. UL certified with 94V-0 flammability code, it offers reliable commercial use in various electronic devices.
39-30-1022
Molex 39-30-1022 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring matte tin finish and polyamide66 insulator material, it offers high insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range of -40 to +105 °C.
39-30-1042
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved