Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Power Connectors; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT APPLICABLE; Termination Contact Finish: MATTE TIN OVER NICKEL;
Median Price
$4.831
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
VNN
Vyrian
Continental Prestige Electronics
$4.735
Netroflash
Andel Nordic
$7.574
$7.271
Aztec Data Supply Inc.
$8.189
AZTECH Wire
$8.193
Semicontronic
$13.500
$13.162
$13.095
Argo Parts USA
Corphita
Power Connectors 78235-1101 attributes and parameters. Explore more Power Connectors devices from Molex
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
78235-1101 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
1552200168
Molex
WIRE AND CABLE;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transistor & Electronic
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
43160-3104
Molex 43160-3104 is a rectangular power connector with 4 contacts, featuring tin over copper finish. It has a mating contact pitch of 0.295", insulation resistance of 1G ohm, and operates b/w -40°C to 75°C. Ideal for board mounting applications in commercial settings due to its reliability and UL94V-0 flammability rating.
2-917807-3
TE Connectivity
TE Connectivity 2-917807-3 is a RECTANGULAR POWER CONNECTOR with 6 contacts, GLASS FILLED POLYESTER insulator, and CRIMP termination. Operating from -55 to 105 °C, it has an Insulation Resistance of 1 Gohm. Used in commercial applications for power connections with UL94V-0 flammability rating.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
1-770174-0
TE Connectivity's 1-770174-0 is a rectangular power connector with 4 contacts, rated at 600V and 9.5A. Featuring polyamide insulation, it operates b/w -55 to 105°C, ideal for board mounting applications requiring durability and reliability in commercial settings.
691701530002B
Wuerth Elektronik & Kg
691701530002B by Wurth Elektronik is a Power Connector with 0.2" Mating Contact Pitch, 4000VAC Dielectric Withstanding Voltage, and TIN Termination Contact Finish. It features LIQUID CRYSTAL POLYMER Insulator Material and BRASS Contact Material. Ideal for commercial applications requiring a polarized housing with right angle mounting and locking option.
105405-1312
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1376385-1
TE Connectivity 1376385-1 is a RECTANGULAR POWER CONNECTOR with 4 contacts, rated at 10A. Featuring GLASS FILLED POLYAMIDE66 insulator material, it offers high insulation resistance of 500MΩ. Ideal for board mounting with SOLDERABLE RETENTION CLIPS, this connector operates b/w -30 to 105°C and has a durability of 25 cycles.
151034-0013
The Molex 151034-0013 is a rectangular power connector with polybutylene terephthalate insulator. It has 3 mixed contacts, operates b/w -40 to 105°C, and features crimp termination for commercial applications in cable mounting.
39-01-4043
The Molex 39-01-4043 is a rectangular power connector with 4 contacts, made of POLYAMIDE66 material. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for commercial applications, it offers crimp termination and durability up to 30 cycles.
43020-1200
Molex 43020-1200 is a rectangular power connector with 12 contacts, PBT-POLYESTER insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, suitable for commercial applications requiring male crimp connectors in cable and panel mounting setups.
428193222
Molex 428193222 Power Connector features 0.394" mating contact pitch, 1.33" body length, and 1000000000 ohm insulation resistance. Ideal for applications requiring a durable connector with 2200VAC dielectric voltage withstand and -40 to 105°C operating temperature range.
39-29-1107
Molex 39-29-1107 is a rectangular power connector with 10 contacts, made of brass and polyamide66. It has a body length of 1.268", width of 0.393", and depth of 0.764". Suitable for board mounting, it operates b/w -40°C to 105°C, with matte tin over nickel termination finish.
87427-0402
The Molex 87427-0402 is a rectangular power connector with 4 contacts, TIN over nickel finish, and polyamide insulator. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable male connectors with right-angle mounting style.
2092080004
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
7461147
The Wurth Elektronik & Kg 7461147 is a rectangular power connector with a body length and width of 0.35 inch, and a body depth of 0.27 inch. It has 16 contacts and is designed for board mounting. With a max operating temperature of 155°C and min operating temperature of -55°C, it is suitable for commercial applications requiring reliable power connections.
770017-1
TE Connectivity's 770017-1 is a Power Connector with Mating Contact Pitch of 0.25", Insulation Resistance of 100M ohm, and Operating Temperature range from -55 to 120°C. Ideal for cable mounting applications, it features a durable glass-filled nylon shell and crimp termination for reliable performance in commercial settings.
PCIH47M400A1/AA
Positronic Industries
PCIH47M400A1/AA by Positronic: Rectangular power connector with 47 contacts, gold over nickel termination finish. Ideal for board and panel mounting in applications requiring mixed contacts and male gender connectors.
10-18-1041
Molex 10-18-1041 is a rectangular power connector with 4 contacts, suitable for board mounting. It features polyester insulator material, tin termination contact finish, and a max operating temperature of 105°C. Ideal for commercial applications requiring durable male connectors with solder termination and straight mounting style.
UMPS-10-03.5-L-V-S-W-TR
Samtec
UMPS-10-03.5-L-V-S-W-TR by Samtec is a power connector with dimensions of 0.986" x 0.244" x 0.163". It features Liquid Crystal Polymer insulator, operating temp range of -55 to 125°C, and 10 contacts. Ideal for board mounting applications requiring female socket connectors with blade pin contact style.
2002411125
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
78235-1102
Power Connectors; Contact Material: COPPER ALLOY; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Contact Finish: NOT APPLICABLE;
78230-2101
78230-1101
Power Connectors; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Contact Finish: NOT APPLICABLE; Contact Material: COPPER ALLOY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved