Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 39-28-9048 is a rectangular power connector with 4 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. It has a temperature range from -40 to 105°C, suitable for board mounting applications requiring durability and reliability. The connector uses tin with nickel barrier finish on brass contacts, meeting UL flammability code standards.
Median Price
$2.130
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Arrow
1+ parts
$1.521
100+ parts
-
1k+ parts
10k+ parts
Sager
$1.550
$1.220
Heilind Electronics
$1.587
$1.274
$1.255
Interstate Connecting
$1.786
$1.566
$1.414
Avnet
$1.833
Farnell
$2.610
$1.850
$1.360
Mouser Electronics
$2.950
$2.010
$1.760
$1.660
RS Americas
$3.000
$2.250
$1.800
DigiKey
$3.030
Chip1Stop
$3.660
$1.530
$1.340
Element14
$4.120
$4.030
$3.340
TTI
$1.390
$1.310
$1.270
Verical
$1.681
Powell Electronics
$1.910
$1.810
$1.640
Master Electronics
$1.730
$1.650
Newark
$2.380
$1.740
PEI Genesis
Distrelec
RS (Exports)
$2.164
$2.077
$1.719
NEP Electronics
Digiode
$1.155
DF Sales Co.
$1.200
Nova Conductors
$1.590
TestEquity
TME
$2.790
$2.080
Semtec, LLC
IBS Electronics
$2.328
$2.216
$2.020
Vyrian
ComSIT Distribution GmbH
NAC Semi
$1.450
VNN
Bristol Electronics
Electronic Expediters
Semi Source
Rebound Electronics
Prism Electronics
J & M Industries LLC
Carlin Systems, Inc.
Inventory MP
R&J Components
Corphita
$1.094
Argo Parts USA
$1.380
Netroflash
$1.511
$1.479
Semicontronic
$2.460
$2.398
$2.386
Continental Prestige Electronics
$2.730
$1.460
$1.350
Aztec Data Supply Inc.
$4.414
Andel Nordic
$10.464
$10.046
Perfect Parts
Eastek
GreenTree Electronics
Assy Fe
Glotronic Ltd.
Abacus Technologies
RTC Component Inc.
Compact size allows for easy installation in tight spaces.
High insulation resistance ensures reliable and safe operation.
High dielectric strength ensures reliable performance in high voltage applications.
Tin finish with nickel barrier provides excellent conductivity and corrosion resistance.
Can operate at high temperatures without compromising performance.
Can operate in extreme low temperature environments.
Provides multiple connection points for increased functionality.
Neutral color blends well with various equipment and installations.
Specific arrangement for efficient and effective power transfer.
Power Connectors 39-28-9048 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-28-9048 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Cancel Product Improvement 09/Feb/2022 Mult Devs Product Improvement 17/Feb/2022
PCN Assembly/Origin - Multiple Supplier Adding Supplier 18/Aug/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Cheng-yi Electronic
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
IPT1-105-01-S-D
Samtec
Samtec's IPT1-105-01-S-D is a rectangular power connector with 10 contacts, gold mating finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and UL flammability rating. Ideal for board mounting in commercial applications.
1501772100
Molex
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
0-0350782-1
TE Connectivity's 0-0350782-1 is a panel mount rectangular power connector with insulation resistance of 1000000000 ohm. With UL Flammability Code 94V-0, it has a rated current of 19 A and operates b/w -55 to 105 °C. Ideal for commercial applications requiring durable male connectors with crimp termination.
2-282191-1
TE Connectivity's 2-282191-1 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYAMIDE66 insulator. Featuring 3 FEMALE contacts, it is designed for CABLE mounting with WIRE termination. Ideal for power applications requiring reliable and secure connections.
IPS1-125-01-S-D-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: IPS1; DIN Conformance: NO; Contact Material: PHOSPHOR BRONZE; Body or Shell Style: SOCKET;
39-01-3025
Molex 39-01-3025 is a rectangular power connector with POLYAMIDE insulator, suitable for commercial applications. Features include 2 contacts, 1000000000 ohm insulation resistance, and -40 to 105 °C operating temperature range. Ideal for cable mounting with crimp termination and locking mounting option.
2002411122
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
43650-0218
The Molex 43650-0218 is a rectangular power connector with a mating contact pitch of 0.118". It features an insulation resistance of 1G ohm and dielectric voltage of 1500VAC, suitable for board mounting applications. With a rated current of 8.5A, this connector offers durability through 30 cycles and operates in temperatures ranging from -40 to 105°C.
43650-0316
The Molex 43650-0316 power connector features a body length of 0.498", insulation resistance of 1G ohm, and matte tin termination finish. Ideal for board mounting with a temperature range from -40 to 105 °C, it has a contact arrangement of S0P3 and durability of 30 cycles.
43045-1218
The Molex 43045-1218 is a rectangular power connector with 12 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 1000VAC. With a body width of 0.345" and termination in tin finish, it's ideal for board mounting applications requiring durability over 30 cycles.
39-29-9025
The Molex 39-29-9025 is a rectangular power connector with 2 rows, rated at 9A signal current. It features a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range from -40 to +105°C.
1-178316-3
TE Connectivity 1-178316-3 is a rectangular power connector with 6 contacts, rated at 9.5A signal current. It features glass-filled polyester insulation, solderable retention clips for board mounting, and a temperature range of -55 to 105°C. Ideal for commercial applications requiring durable connectors with UL certification.
43045-1202
The Molex 43045-1202 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and UL flammability rating of 94V-0.
3-794630-8
TE Connectivity 3-794630-8 is a power connector with 0.118" contact pitch, rated for 250V and 5A signal current. It features POLYAMIDE insulation, UL94V-0 flammability rating, and solder termination. Ideal for commercial applications requiring reliable board-mounted connectors with locking options.
2-1410271-0
TE Connectivity 2-1410271-0 is a rectangular power connector with liquid crystal polymer insulator. It has a rated voltage of 250V and insulation resistance of 10^10 ohm. Ideal for power applications, it features matte tin over nickel termination contact finish and complies with UL standards.
1723104106
Molex 1723104106 Power Connector features Liquid Crystal Polymer insulator, UL 94V-0 flammability code, and male SQ pin-skt contact style. With dimensions of 0.956" x 0.352" x 0.614", it operates b/w -40°C to 105°C. Ideal for board mounting applications with 6 contacts and solder termination.
770020-1
TE Connectivity's 770020-1 is a POWER CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 6 contacts, operates b/w -55 to 120 °C, and meets CSA, UL, V standards. Ideal for CABLE mounting applications at 115/230VAC mains connector rating.
1053071202
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1720650008
Molex 1720650008 is a rectangular power connector with liquid crystal polymer insulator, 8 contacts, and 2200VAC dielectric voltage. It is used in commercial applications for board mounting with split board lock option and solder termination. Operating temperature ranges from -40 to 105°C.
1611990000
Weidmueller & Kg
The Weidmueller & Kg 1611990000 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator and Silver (Ag) termination. Featuring 3 contacts, it is designed for CABLE mounting with SCREW termination. Ideal for applications requiring FEMALE contact gender and SOCKET body style, with UL Flammability Code of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-28-1043
Molex 39-28-1043 is a rectangular power connector with 4 contacts, TIN over copper finish. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability, it meets CSA, TUV, and UL standards.
39-28-1023
Molex 39-28-1023 is a rectangular power connector with 0.25"x.38"x.5" dimensions, suitable for board mounting. It features 1000000000 ohm insulation resistance, 2200VAC dielectric voltage, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring durable male contacts with solder termination and natural insulator color.
39-28-1083
Molex 39-28-1083 is a rectangular power connector with 8 contacts, TIN over copper finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability meeting CSA, TUV, UL standards.
39-28-1063
Molex 39-28-1063 is a rectangular power connector with 6 contacts, TIN COPPER finish, and POLYAMIDE66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C, and durability of 30 cycles. Ideal for board mounting applications in commercial settings due to its reliability and UL94V-2 flammability rating.
39-28-1103
The Molex 39-28-1103 is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and locking options.
39-28-8040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-28-1123
The Molex 39-28-1123 is a rectangular power connector with 12 contacts, made of brass and tin copper finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability meeting CSA and UL standards.
39-28-8020
Molex 39-28-8020 is a rectangular power connector with 2 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications due to its durability and reliability meeting CSA, TUV, UL standards.
39-28-1203
Molex 39-28-1203 is a rectangular power connector with 20 contacts, rated at 13A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and UL94V-2 flammability rating.
39-28-8060
Molex 39-28-8060 is a rectangular power connector with 6 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
39-28-1143
Molex 39-28-1143 is a rectangular power connector with 14 contacts, made of brass and tin/copper finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications due to its durability, reliability, and UL flammability rating.
39-28-8080
39-28-8100
39-28-1243
The Molex 39-28-1243 is a rectangular power connector with a body length of 2.07", body width of 0.38", and body depth of 0.5". It is commonly used in board mounting applications, has a max operating temperature of 105°C, and offers excellent insulation resistance of 1GΩ.
39-28-8140
The Molex 39-28-8140 is a rectangular power connector with a body length of 1.2", body width of 0.38", and body depth of 0.5". It has an insulation resistance of 1,000,000,000 ohm and can withstand a dielectric voltage of 2200VAC. This connector is commonly used in board mounting applications for power connections.
39-28-9108
39-28-8240
39-28-1163
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-28-8160
39-28-9028
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved