Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 22-05-2041 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator material, BRASS contact material, and Tin (Sn) - Nickel (Ni) termination finish, it offers high durability with 25 cycles. Ideal for commercial applications requiring a reliable connection in a compact form factor.
Median Price
$0.176
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Newark
1+ parts
$0.106
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.144
$0.117
Heilind Electronics
$0.157
$0.126
Mouser Electronics
$0.300
$0.201
$0.167
$0.156
DigiKey
$0.410
$0.247
$0.196
Element14
$0.586
$0.253
$0.231
Adafruit Industries
$1.602
$1.522
Chip1Stop
$0.180
$0.159
NEP Electronics
PEI Genesis
Verical
$0.145
$0.133
Master Electronics
$0.173
$0.153
Powell Electronics
$0.188
$0.155
TTI Europe
Avnet
RS Americas
TTI
RS (Exports)
$0.229
$0.194
Farnell
$0.160
Digiode
$0.154
Nova Conductors
$0.169
TestEquity
Component Electronics Inc.
$0.380
$0.290
$0.250
Vyrian
IBS Electronics
$0.165
TME
$0.191
ACDS - Activité Composants Distribution Service
Classic Components Corporation
Atlantic Semiconductor
Bristol Electronics
Elcom Components
Component Sense
VNN
Electronic Expediters
Prism Electronics
Florida Circuit
Semicontronic
$0.082
$0.080
Corphita
$0.146
Continental Prestige Electronics
$0.162
$0.158
Argo Parts USA
Netroflash
Advanced Electronics
Aztec Data Supply Inc.
$4.141
Andel Nordic
$43.740
$30.618
Assy Fe
Perfect Parts
Authorized Procurement Solutions
XScomponents
Cyclops Electronics Ltd (Excess)
Kepictronics
Glotronic Ltd.
Eastek
Allen Electronics Distributors
$0.226
$0.181
Robosynatics
$0.413
Lucentia Tech
EMSNET (Excess)
The close contact pitch allows for efficient and reliable connections.
A compact body length saves space and allows for versatile installation options.
High insulation resistance ensures minimal signal interference.
The slim body width is suitable for tight spaces and compact designs.
The Tin finish with Nickel barrier provides excellent conductivity and durability.
Polyamide insulator offers good mechanical and electrical properties for reliable performance.
A thick plating ensures long-term durability and corrosion resistance.
Designed for easy and secure connections to a PCB board.
Brass contacts offer excellent conductivity and reliability.
Meets stringent safety standards for fire resistance.
White color for easy identification and aesthetic appeal.
Complies with industry standards for quality and safety.
Suitable for applications requiring multiple connections.
Designed for easy installation and secure mounting on a PCB.
Standard terminal pitch for compatibility with various devices and boards.
Solder termination ensures a strong and reliable connection.
Right angle mounting allows for flexible PCB layout and space-saving.
Headers & Edge Type Connectors 22-05-2041 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
22-05-2041 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Mini-FIt,KK Plating 01/Nov/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - Multiple Devices Align Packaging 07/Jun/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
Alpha & Omega Semiconductor
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MTCB1X-105-XXXCS025
TE Connectivity
BOARD CONNECTOR;
VHR-2N-BK
J S T Mfg
70553-0001
Molex
Molex 70553-0001 is a board connector with 0.1" pitch, matte tin finish, and glass-filled polycarbonate insulator. Ideal for commercial applications, it features right-angle mounting and solder termination for reliable connections in electronic devices.
TSW-106-07-G-S
Samtec
Samtec TSW-106-07-G-S is a 6-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body size of 0.6" x 0.098" x 0.1". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C and meets UL standards.
DF40C-100DS-0.4V(57)
Hirose Electric
DF40C-100DS-0.4V(57) by Hirose Electric is a 2-row, 100-contact board stacking connector with liquid crystal polymer insulator. Featuring 0.016" mating contact pitch and 100VAC dielectric voltage, it operates b/w -35°C to 85°C. Ideal for applications requiring high durability and signal current of 0.3A, such as PCB connections in electronics industry.
2-640456-2
The TE Connectivity 2-640456-2 is a board connector with a mating contact pitch of 0.1", suitable for commercial applications. Featuring a max operating temperature of 105°C, it has 22 contacts and a rated current of 5A. With solder termination and UL94V-0 flammability rating, it offers reliable performance in various electronic systems.
B4B-EH-A(LF)(SN)
B4B-EH-A(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.098" pitch, 0.492" body length, and 0.15" body width. It uses TIN COPPER termination for soldering applications in headers & edge type connectors. The connector features POLYAMIDE66 insulator material and BRASS contact material, suitable for various electronic devices requiring a male contact gender.
DF11-10DS-2C
The Hirose Electric DF11-10DS-2C is a 10-contact, 2-row board connector with a mating contact pitch of 0.079". Featuring a dielectric voltage of 650VAC and insulation resistance of 1Gohm, it's ideal for commercial applications requiring a durable, female socket-style connector with crimp termination and black insulator color.
SSW-110-01-G-D
SSW-110-01-G-D by Samtec is a 2-row, 20-contact board connector with a mating contact pitch of 0.1". It features gold over nickel termination finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable socket connections on PCBs with a rectangular contact pattern.
XHP-4
XHP-4 by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.098" pitch, 1000VAC voltage withstand, and 3A signal current rating. It features POLYAMIDE6 insulation, -25 to 85°C operating range, and UL94V-0 flammability. Ideal for CABLE mounting applications requiring FEMALE SQ PIN-SKT contacts with CRIMP termination.
B2PS-VH-GU
B2PS-VH-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This connector is suitable for applications requiring male contact gender and UL 94V-0 flammability rating.
22-01-3087
The Molex 22-01-3087 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a dielectric voltage of 700VAC and insulation resistance of 1Gohm, it operates b/w -40 to 105°C. With a removable contact block design, it has 8 contacts and is UL94V-0 rated for applications requiring durability and reliability in commercial settings.
SSW-106-01-T-D
Samtec SSW-106-01-T-D is a 2-row, 12-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and matte tin finish over nickel. Ideal for PCB applications requiring reliable female socket connectors with solder termination in commercial settings.
1410187-3
TE Connectivity's 1410187-3 header connector features a mating contact pitch of 0.07", insulation resistance of 1Gohm, and operates b/w -55 to 105°C. With a total of 112 contacts in a polarized design, it is ideal for board-to-board connections in commercial applications requiring durability and reliability.
DTM04-3P-E003
TE Connectivity's DTM04-3P-E003 is a 1.68"x.816"x.638" board connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 rated for 250V/7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring polarized male contacts and strain relief option.
ADM6-60-01.5-L-4-2-A
BOARD STACKING CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
B6B-PH-SM4-TB(LF)(SN)
B6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for PCB applications requiring POLYAMIDE66 insulator, COPPER ALLOY contacts, and TIN COPPER finish in a compact 0.628"x.197"x.26" body.
S4B-XH-A-1(LF)(SN)
S4B-XH-A-1(LF)(SN) by J S T Mfg is a 4-contact board connector with brass contacts, tin finish, and 2.5mm pitch. It is used for right-angle mounting in headers & edge type connectors applications.
ZHR-3
ZHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.059" pitch, POLYAMIDE66 insulator, and 500VAC dielectric voltage. Ideal for CABLE mounting applications, it has a rated current of 1A and operates b/w -25 to 85°C.
22-01-2047
The Molex 22-01-2047 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 4A rated current, it has a durable design with removable contact blocks and white insulator color. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-05-3041
The Molex 22-05-3041 is a board connector with mating contact pitch of 0.1", body length of 0.4", and body width of 0.25". It features matte tin over nickel termination, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right angle mounting solution with rectangular contact pattern on PCBs.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
22-05-7048
Molex 22-05-7048 is a board connector with 4 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
22-05-7025
The Molex 22-05-7025 is a board connector with 0.098" mating contact pitch, suitable for headers & edge type connectors. Featuring a 1400VAC dielectric voltage, it has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for commercial applications requiring reliable signal transmission at 3A current rating.
22-05-2081
Molex 22-05-2081 is a board connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this connector has a durable design with UL flammability rating of 94V-0.
22-05-2051
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
22-05-7028
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: MATTE TIN OVER NICKEL;
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
22-05-3031
The Molex 22-05-3031 is a board connector with 3 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.3" x 0.25" x 0.442". It uses matte tin over nickel finish for termination and polyamide insulator material. Ideal for commercial applications requiring a right-angle mounting style on PCBs.
22-05-3051
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Insertion Force (N): 1.946;
22-05-7058
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-05-2031
Molex 22-05-2031 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring matte tin over nickel termination finish, it offers high durability with 25 cycles and reliable performance in commercial applications. The connector has a total of 3 contacts, solder termination type, and white polyamide insulator material.
22-05-2061
Molex 22-05-2061 is a board connector with 6 contacts, featuring matte tin over nickel finish. With a mating contact pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this right-angle receptacle has a durability of 25 cycles and termination via solder.
22-05-7038
Molex 22-05-7038 is a board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 1500VAC voltage withstand, and 105°C max operating temp. Ideal for PCB mounting with 3 contacts in a white insulator body.
22-05-3061
Molex 22-05-3061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.6" x 0.25" x 0.442". It uses matte tin over nickel termination for soldering applications in commercial reliability scenarios.
22-05-2121
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Length: .124 inch;
22-05-7035
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Connectors: ONE;
22-05-1022
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
22-05-7045
Molex 22-05-7045 is a board connector with 0.098" mating contact pitch, 1400VAC dielectric voltage, and -40 to 105°C operating range. Ideal for commercial applications requiring a durable, polarized housing with 4 contacts in a right-angle mounting style.
22-05-2221
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved