Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 14-56-4045 is a board connector with 0.1" mating contact pitch, gold termination finish, and 600VAC dielectric voltage. Ideal for commercial applications, it has a black insulator color, UL flammability rating of 94V-0, and operates b/w -40 to 120°C.
Median Price
$188.571
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$5.583
100+ parts
$5.303
1k+ parts
10k+ parts
-
Verical
Powell Electronics
$203.080
Digiode
$5.304
Nova Conductors
$160.938
Vyrian
VNN
Semicontronic
$4.750
$4.631
$4.608
Corphita
$5.025
Modulus Dynamics
$5.338
Advanced Electronics
AZTECH Wire
$19.269
Bastille Electronics
$160.900
$152.855
$143.201
Netroflash
Continental Prestige Electronics
$188.000
Argo Parts USA
Lucentia Tech
$0.057
Robosynatics
Close contact pitch allows for efficient and compact arrangement of connectors on a board.
Optimal length for easy installation and compatibility with various devices.
High insulation resistance ensures reliable and safe connections.
Narrow body width saves space and allows for denser connector configurations.
High dielectric voltage withstand capacity ensures safety in high voltage environments.
Gold termination ensures low contact resistance and long-lasting performance.
Adequate body depth allows for secure wire connections and stability.
Durable material for insulator ensures longevity and resistance to wear and tear.
High operating temperature range makes it suitable for a wide range of applications.
Low minimum operating temperature ensures functionality in various environments.
Optimal plating thickness for durability and reliable performance.
Specifically designed for use on a board for secure and efficient connections.
UL-rated flammability ensures safety in case of fire hazards.
Polarized design ensures correct alignment during connection, preventing damage.
High current rating allows for reliable signal transmission.
Neutral color for versatility and aesthetic appeal.
Compliance with industry standards for quality and safety assurance.
Sufficient number of contacts for various connectivity needs.
Accommodates small wire sizes for versatile connectivity options.
Cable mounting allows for versatile installation options.
Compatible with small wire sizes for flexibility in wiring configurations.
IDC termination for quick and easy wire connections without soldering.
Low withdrawal force for easy disconnection and maintenance.
Female contacts for secure mating with male counterparts.
Low contact resistance ensures efficient signal transmission.
Plug-style connector for easy and secure connections.
Square pin socket contact style for reliable and stable connections.
Ideal insertion force for secure and stable connections.
Rectangular contact pattern for efficient and reliable connections.
Commercial grade reliability for consistent performance in various applications.
Headers & Edge Type Connectors 14-56-4045 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
14-56-4045 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
S2B-PH-SM4-TB
J S T Mfg
S2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2mm for SURFACE MOUNT applications in headers & edge type connectors. The connector is UL 94V-0 rated and suitable for RIGHT ANGLE mounting on boards.
B2B-PH-SM4-TBT(LF)(SN)
B2B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with TIN COPPER finish. Featuring 2 contacts, it has a 2mm terminal pitch and is ideal for surface mount applications. With UL 94V-0 flammability rating, this male connector is designed for straight mounting on boards.
640456-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: NO;
FTS-105-01-L-DV-P-TR
Samtec
Samtec FTS-105-01-L-DV-P-TR is a 10-contact board connector with 0.05" mating pitch, suitable for commercial applications. It features gold over nickel finish, liquid crystal polymer insulator, and matte tin termination. Ideal for PCBs with 1.27mm terminal pitch and operating temperatures from -55 to 125°C.
54132-3062
Molex
Molex 54132-3062 FFC/FPC connector with 30 contacts, 0.020" pitch, and GOLD finish. Ideal for board mounting with POLYAMIDE insulator material. Operating temp -20 to 85 °C, UL94V-0 rated for commercial reliability.
ADM6-60-01.5-L-4-2-A
BOARD STACKING CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
M20-9990446
Harwin Plc
The Harwin PLC M20-9990446 is a board connector with 0.1" mating contact pitch, 3A signal current rating, and -40 to 105°C operating temperature range. It is ideal for commercial applications requiring a durable male receptacle with solder termination and UL flammability rating of 94V-0.
1658621-1
TE Connectivity
TE Connectivity 1658621-1 is a dual-row board connector with 10 contacts, 0.1" pitch, and polyethylene insulation. It operates b/w -65 to 105°C, rated at 1A signal current, suitable for ribbon cable termination in commercial applications.
TSW-104-07-G-S
Samtec TSW-104-07-G-S is a 4-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and width of 0.098". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C, meeting UL standards.
150201
Weidmueller & Kg
Weidmueller & Kg's 150201 is a BOARD CONNECTOR with TIN finish, 4 contacts, and FEMALE gender. It is used for CABLE mounting with SCREW termination in PLUG body style.
SFW4S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW4S-2STE1LF is a 4-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
51281-0594
Molex 51281-0594 FFC/FPC connector with 0.020" pitch, 5 contacts, and glass-filled LCP insulator. Ideal for board mounting in commercial applications. Operating temp -20 to 85°C, UL94V-0 rated, female contact type with surface mount termination.
3220-10-0300-00-TR
Cnc Tech
3220-10-0300-00-TR by Cnc Tech is a BOARD CONNECTOR with 2 rows, 10 contacts, and BRASS material. It features Gold (Au) termination with Nickel (Ni) barrier for durability. Ideal for surface mount applications in electronics requiring high-quality male connectors.
801-43-025-10-001000
Mill-max Mfg
801-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, MATTE TIN finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors on PCBs.
BM04B-SRSS-G-TB(LF)(SN)
BM04B-SRSS-G-TB(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with Tin (Sn) finish. Made of copper alloy, it has UL 94V-0 flammability rating and surface mount termination. Ideal for straight board mounting applications in electronics.
B4B-PH-K-S(LF)(SN)
B4B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator material and BRASS contact material. Ideal for applications requiring a male SQ PIN-SKT contact style on a RECTANGULAR PCB pattern.
22-28-4020
Molex 22-28-4020 is a board connector with 0.1" pitch, ideal for commercial applications. Featuring bright tin finish, it offers 25 cycles durability and 10 mohm contact resistance. With a rectangular PCB contact pattern and solder termination, this male connector has a total of 2 contacts in a black insulator body.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
B3B-EH-A(LF)(SN)
B3B-EH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, 0.098" pitch, and 0.394" body length. It features Tin/Copper termination for soldering applications. Ideal for use in electronic devices requiring reliable male connectors on circuit boards.
851-47-053-10-002000
BOARD CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
145638009211859+
Kyocera
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED;
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
14-56-2042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .139 inch; Body or Shell Style: PLUG;
145638009511859+
PCB CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: 5638; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO;
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Connectors: ONE; No. of PCB Rows: 1;
Kyocera Connector Products
PCMCIA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Terminal Pitch (mm): 2.4892;
14-56-4040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; JESD-609 Code: e4;
14-56-4041
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Plating Thickness (inch): 30u; Maximum Insertion Force (N): 2.224;
14-56-4046
The Molex 14-56-4046 is a 2-row loaded board connector with 4 contacts. It is designed for cable mounting and uses IDC termination. This female contact connector is commonly used in various applications requiring reliable connections.
14-56-4048
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: IDC; Filter Feature: NO; No. of Rows Loaded: 2;
14-56-4043
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; Mating Contact Finish: NOT SPECIFIED;
14-56-2022
The Molex 14-56-2022 is a board connector with a mating contact pitch of 0.1". It features TIN over nickel termination, phosphor bronze contacts, and glass-filled polyester insulator material. This female connector has a total of 2 contacts, suitable for commercial applications requiring a reliable rectangular contact pattern.
14-56-2062
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mounting Option-1: LATCH;
14-56-2032
Molex 14-56-2032 is a board connector with 0.1" pitch, TIN over nickel finish, and 15u plating thickness. Ideal for commercial applications, it features a polarized housing, female contact gender, and IDC termination type for reliable connections in electronics.
14-56-2041
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; DIN Conformance: NO; Minimum Withdrawal Force (N): 1.668;
14-56-2082
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Contact Design: PREASSEM CONN;
14-56-4042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; Contact Style: SQ PIN-SKT;
145604140014829+
145604140014829+ by KYOCERA AVX is a BOARD STACKING CONNECTOR with a Mating Contact Pitch of 0.02 inch and a Dielectric Withstanding Voltage of 350VAC. It is suitable for applications requiring a compact and reliable connection in electronic devices.
145689040000858+
BOARD STACKING CONNECTOR;
14-56-4023
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; Mating Contact Pitch (inch): 0.1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved