Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 14-56-2062 is a board connector with 6 contacts, gold over nickel termination finish, and glass-filled polyester insulator. It has a mating contact pitch of 0.1", body length of 0.599", and body width of 0.139". Ideal for commercial applications requiring a polarized housing, this connector features female contact gender, IDC termination type, and square pin/socket contact style.
Median Price
$1.500
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Verical
1+ parts
$1.550
100+ parts
-
1k+ parts
$1.470
10k+ parts
$1.330
Mouser Electronics
$2.250
$1.770
$1.450
$1.340
DigiKey
$2.560
$1.804
$1.424
Master Electronics
$1.290
$1.190
PEI Genesis
Powell Electronics
$1.370
$1.080
TTI
$1.070
Digiode
$0.288
Rapid Electronics
$1.162
Nova Conductors
$1.307
Vyrian
IBS Electronics
$2.298
$2.030
$1.748
VNN
Prism Electronics
A2Z Electronics, Inc.
Semicontronic
$0.258
$0.252
$0.250
Corphita
$0.273
Aztec Data Supply Inc.
$1.251
Continental Prestige Electronics
$1.260
$1.235
Argo Parts USA
Andel Nordic
$11.064
$10.621
Assy Fe
Authorized Procurement Solutions
Perfect Parts
Netroflash
$1.281
$1.242
$1.216
Futuretech Components
Closer contact pitch allows for more connections within a limited space, making this product ideal for compact electronic devices.
The compact body length helps in saving space on the circuit board, making it suitable for applications with size constraints.
The slim body width allows for higher density of connections on the board, making it efficient for use in complex electronic systems.
The gold over nickel finish ensures good conductivity and corrosion resistance, leading to reliable and long-lasting connections.
The use of glass filled polyester as insulator material ensures durability and high temperature resistance, making this product suitable for demanding environments.
Preassembled contacts simplify the assembly process, saving time and effort while ensuring consistent connection quality.
A plating thickness of 15u provides sufficient protection against wear and tear, ensuring the longevity of the connector.
Phosphor bronze contacts offer excellent conductivity and durability, enabling reliable electrical connections over time.
The UL 94V-0 flammability rating ensures that the connector meets strict fire safety standards, making it a reliable choice for sensitive applications.
The polarized housing design prevents incorrect connections, ensuring proper alignment and reliable performance of the connector.
The black insulator color provides a professional and discreet appearance, making the connector suitable for a wide range of applications.
With 6 contacts, this connector offers sufficient connectivity options for various electronic circuits, making it versatile and adaptable.
Support for 24 AWG wire sizes ensures compatibility with standard wire gauges, making this product widely applicable in different electronic setups.
The cable mounting type simplifies installation and maintenance processes, allowing for easy integration into existing systems.
The insulation displacement connection (IDC) termination type enables quick and reliable wire termination without the need for soldering, facilitating easy assembly.
The female contact gender allows for mateable connections with male connectors, enabling versatile usage in various electronic devices.
The plug body or shell style offers secure connections and easy disconnection, making this connector convenient for applications that require frequent changes or upgrades.
The square pin and socket contact style provides a stable and secure connection, minimizing signal loss and ensuring reliable data transmission.
The low maximum insertion force makes it easy to insert and remove the connector, reducing the risk of damage during installation or maintenance.
The locking and latch mounting options offer additional security and stability once the connector is in place, preventing accidental disconnection.
The rectangular contact pattern facilitates efficient and reliable connections, ensuring proper alignment and signal transmission in electronic circuits.
Designed for commercial applications, this connector offers reliable performance and durability under normal operating conditions.
Headers & Edge Type Connectors 14-56-2062 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Rows Loaded:
Option:
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
14-56-2062 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
Dc Components
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NE555D
STMicroelectronics
DF11-18DP-2DSA(01)
Hirose Electric
DF11-18DP-2DSA(01) by Hirose Electric is a 2-row, 18-contact board connector with gold termination finish. It offers a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring durability, reliability, and signal current rating up to 2A in commercial settings.
22-29-2051
Molex
The Molex 22-29-2051 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.5 inch. It has an insulation resistance of 1000000000 ohm and is commonly used in commercial applications due to its durability and reliability.
B6BZR(LF)(SN)
J S T Mfg
B6BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. It is used in commercial applications, featuring GLASS FILLED POLYAMIDE insulation material and BRASS contact material for reliability.
43025-0600
The Molex 43025-0600 is a board connector with 6 contacts, rated at 2.5A signal current. It features a 0.388" body length, 0.326" width, and 0.551" depth made of POLYAMIDE insulator material. With UL Flammability Code 94V-0, it operates b/w -40 to 105°C and is ideal for commercial applications requiring high insulation resistance up to 1Gohm.
BM08B-GHS-TBT(LF)(SN)(N)
BM08B-GHS-TBT(LF)(SN)(N) by J S T Mfg is an 8-contact board connector with TIN over copper finish. It features phosphor bronze contact material, UL 94V-0 flammability code, and 1.25mm terminal pitch for surface mount termination. Ideal for applications requiring male gender connectors in straight mounting style on circuit boards.
B5B-XH-A(LF)(SN)
B5B-XH-A(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.098" pitch, suitable for -25 to 85°C temp range. Features include 1000000000 ohm insulation resistance, tin over copper finish, and UL94V-0 flammability rating. Ideal for applications requiring reliable signal transmission in electronic devices.
5-534998-6
TE Connectivity's 5-534998-6 board connector features insulation resistance of 5000000000 ohm, dielectric voltage of 750VAC, and tin finish with nickel barrier. With UL flammability rating of 94V-0, it is ideal for applications requiring a rated current of 2A in temperatures ranging from -65 to 125 °C.
SFW4S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW4S-2STE1LF is a 4-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
EHR-2
EHR-2 by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 3A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulation, operates b/w -25 to 85 °C, and UL94V-0 flammability rating. Ideal for CABLE mounting applications requiring high contact resistance and locking feature.
09061486901
Harting Electronics & Kg
09061486901 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.2", Insulation Resistance of 1TΩ, and Dielectric Withstanding Voltage of 1550VAC. Ideal for board connections in applications requiring durability, reliability, and high current signal transmission at temperatures ranging from -65 to 125°C.
357-074-422-212
Edac
Edac 357-074-422-212 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40 to +105°C. Ideal for applications requiring high reliability and durability in electrical connections.
DT06-6S-EP06
TE Connectivity's DT06-6S-EP06 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized connector has a total of 6 contacts and UL certification.
1-640250-5
TE Connectivity 1-640250-5 is a board connector with 15 contacts, 0.156" pitch, and 6.5A signal current rating. It features glass-filled polyamide insulation, operates b/w -55 to 105°C, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable female connectors with crimp termination in a polarized housing design.
BM02B-GHS-TBT(LF)(SN)
BM02B-GHS-TBT(LF)(SN) by J S T Mfg is a 5.75" BOARD CONNECTOR with 0.049" pitch, suitable for PCBs with POLYAMIDE insulator and PHOSPHOR BRONZE contacts. It offers 500VAC dielectric voltage, -25 to 85°C operating range, and UL94V-0 flammability rating. Ideal for applications requiring high insulation resistance and 1A signal current capacity.
M80-5102042
Harwin Plc
The Harwin PLC M80-5102042 is a 20-contact board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring a glass-filled polyphenylene sulfide insulator, it operates b/w -55°C to 125°C, ideal for commercial applications requiring durability and reliability in PCB connections.
1-640456-5
TE Connectivity 1-640456-5 is a 15-contact board connector with 0.1" pitch, TIN finish, and UL94V-0 flammability rating. Ideal for commercial applications, it features a 5A signal current rating and operates b/w -55°C to 105°C temperature range.
DTM04-2P-E003
DTM04-2P-E003 by TE Connectivity is a 1.68" x 0.651" x 0.638" board connector with GLASS FILLED POLYAMIDE insulator material. It has a rated voltage of 250V and can operate in temperatures ranging from -55 to 125°C. This male connector with one port and two contacts is suitable for cable mounting applications.
B6B-PH-SM4-TB(LF)(SN)
B6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for PCB applications requiring POLYAMIDE66 insulator, COPPER ALLOY contacts, and TIN COPPER finish in a compact 0.628"x.197"x.26" body.
2-640456-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; UL Flammability Code: 94V-0; Terminal Pitch (mm): 2.54;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
14-56-4045
The Molex 14-56-4045 is a board connector with 0.1" mating contact pitch, gold termination finish, and 600VAC dielectric voltage. Ideal for commercial applications, it has a black insulator color, UL flammability rating of 94V-0, and operates b/w -40 to 120°C.
145638009211859+
Kyocera
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED;
KYOCERA AVX
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
14-56-2042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .139 inch; Body or Shell Style: PLUG;
145638009511859+
PCB CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: 5638; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO;
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Connectors: ONE; No. of PCB Rows: 1;
Kyocera Connector Products
PCMCIA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Terminal Pitch (mm): 2.4892;
14-56-4040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; JESD-609 Code: e4;
14-56-4041
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Plating Thickness (inch): 30u; Maximum Insertion Force (N): 2.224;
14-56-4046
The Molex 14-56-4046 is a 2-row loaded board connector with 4 contacts. It is designed for cable mounting and uses IDC termination. This female contact connector is commonly used in various applications requiring reliable connections.
14-56-4048
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: IDC; Filter Feature: NO; No. of Rows Loaded: 2;
14-56-4043
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; Mating Contact Finish: NOT SPECIFIED;
14-56-2022
The Molex 14-56-2022 is a board connector with a mating contact pitch of 0.1". It features TIN over nickel termination, phosphor bronze contacts, and glass-filled polyester insulator material. This female connector has a total of 2 contacts, suitable for commercial applications requiring a reliable rectangular contact pattern.
14-56-2032
Molex 14-56-2032 is a board connector with 0.1" pitch, TIN over nickel finish, and 15u plating thickness. Ideal for commercial applications, it features a polarized housing, female contact gender, and IDC termination type for reliable connections in electronics.
14-56-2041
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; DIN Conformance: NO; Minimum Withdrawal Force (N): 1.668;
14-56-2082
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Contact Design: PREASSEM CONN;
14-56-4042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; Contact Style: SQ PIN-SKT;
145604140014829+
145604140014829+ by KYOCERA AVX is a BOARD STACKING CONNECTOR with a Mating Contact Pitch of 0.02 inch and a Dielectric Withstanding Voltage of 350VAC. It is suitable for applications requiring a compact and reliable connection in electronic devices.
145689040000858+
BOARD STACKING CONNECTOR;
14-56-2085
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .6 inch; Maximum Wire Size: 28 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved