Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 14-56-2032 is a board connector with 0.1" pitch, TIN over nickel finish, and 15u plating thickness. Ideal for commercial applications, it features a polarized housing, female contact gender, and IDC termination type for reliable connections in electronics.
Median Price
$0.730
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Newark
1+ parts
$0.113
100+ parts
1k+ parts
10k+ parts
-
Chip1Stop
$0.682
$0.505
$0.484
$0.469
Arrow
$0.715
$0.640
$0.584
Mouser Electronics
$0.940
$0.711
$0.636
DigiKey
$1.500
Master Electronics
$0.734
$0.714
Verical
$0.760
$0.720
TTI
$0.654
$0.641
$0.616
Powell Electronics
Heilind Electronics
$0.772
$0.629
Interstate Connecting
$0.718
Digiode
$0.107
DF Sales Co.
$0.490
Nova Conductors
$0.675
TME
$0.480
$0.456
Vyrian
IBS Electronics
$0.813
$0.799
VNN
R&J Components
Bristol Electronics
Atlantic Semiconductor
PC Components Company LLC
Sunrise Surplus Inc.
Standard Data Resources
Elcom Components
Corphita
$0.102
Continental Prestige Electronics
$0.661
Argo Parts USA
$0.655
Netroflash
$0.628
Andel Nordic
$7.813
$7.501
Authorized Procurement Solutions
Perfect Parts
Kepictronics
EMSNET (Excess)
0.1 - Close spacing between contacts allows for efficient connectivity on the board.
0.299 inch - Compact body size makes it suitable for tight spaces.
0.139 inch - Narrow width enhances accessibility and flexibility in installation.
TIN OVER NICKEL - Durable finish ensures long-lasting performance and reliable connections.
0.6 inch - Sufficient depth accommodates various wire sizes for versatility.
GLASS FILLED POLYESTER - Strong and resilient material for enhanced durability and insulation.
PREASSEM CONN - Preassembled design simplifies installation and reduces assembly time.
15u - Thick plating ensures excellent conductivity and corrosion resistance.
BOARD CONNECTOR - Specific design for reliable connection to a circuit board.
PHOSPHOR BRONZE - High-quality material for optimal electrical conductivity and strength.
94V-0 - Meets stringent safety standards for fire resistance.
POLARIZED HOUSING - Ensures proper orientation and prevents incorrect connections.
BLACK - Neutral color for universal compatibility and easy identification.
UL - Complies with industry standards for quality and safety.
3 - Ideal number of contacts for many common applications.
24 AWG - Accommodates a wide range of wire sizes for flexibility in connectivity.
CABLE - Suitable for cable connections for ease of installation.
24 AWG - Handles larger wire sizes for versatility and compatibility.
IDC - Insulation Displacement Connection for efficient and secure wire termination.
FEMALE - Ensures compatibility with male connectors for seamless connections.
PLUG - Easy-to-use design for quick and secure connections.
SQ PIN-SKT - Square pin socket design for reliable and stable connections.
2.224 - Low insertion force for easy and gentle connection.
LOCKING - Secure locking mechanism for added stability and reliability.
LATCH - Convenient latch design for quick and easy installation.
RECTANGULAR - Rectangular contact pattern for efficient signal transmission.
COMMERCIAL - Suitable for commercial applications requiring consistent performance and durability.
Headers & Edge Type Connectors 14-56-2032 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Rows Loaded:
Option:
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
14-56-2032 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Continental Device India
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Multicomp Pro
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Weitron Technology
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B3B-PH-K-S(LF)(SN)
J S T Mfg
B3B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator, operates b/w -25 to 85 °C, and features TIN contact finish. Ideal for applications requiring reliable board-to-board connections in electronic devices.
307-074-422-208
Edac
Edac 307-074-422-208 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. With UL94V-0 flammability rating, it's ideal for applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
MM60-52B1-E1-R650
Japan Aviation Electronics Industry
MM60-52B1-E1-R650 by Japan Aviation Electronics is a 52-contact card edge connector with gold over nickel finish. It has a mating contact pitch of 0.031", operates b/w -40 to 80°C, and offers a dielectric voltage of 424VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
70553-0004
Molex
Molex 70553-0004 is a board connector with 0.1" pitch, ideal for commercial applications. Features TIN over nickel finish, UL94V-0 rated black polycarbonate insulator, and 15u plating thickness. Suitable for right-angle mounting on PCBs with rectangular contact pattern.
DF11-14DS-2C
Hirose Electric
DF11-14DS-2C by Hirose Electric is a 2-row, 14-contact board connector with a mating contact pitch of 0.079". Featuring TIN termination finish and polyamide insulator, it operates b/w -30°C to 85°C. Ideal for cable mounting applications, it offers a durability of 30 cycles and rated current of 2A for signal transmission.
66506-354
Amphenol Communications Solutions
Amphenol's 66506-354 is a 40-contact, 2-row board connector with a terminal pitch of 2.54mm. Featuring UL94V-0 flammability rating, it is ideal for applications requiring male solder contacts in straight mounting style.
76384-302LF
76384-302LF by Amphenol is a board connector with 0.1" contact pitch, suitable for commercial applications. It features matte tin over nickel termination finish, gold mating contacts, and glass-filled polyethylene insulator material. With a rated current of 3A and operating temperature range from -40 to 125°C, it offers reliable connectivity in various electronic devices.
S3B-XH-A-1
S3B-XH-A-1 by J S T Mfg is a 3-contact board connector with tin finish, brass contacts, and UL 94V-0 flammability rating. It is ideal for right-angle mounting on boards, featuring a terminal pitch of 2.5mm and solder termination. Perfect for applications requiring reliable male connectors in compact spaces.
BM03B-SRSS-TB(LF)(SN)
BM03B-SRSS-TB(LF)(SN) by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.039" pitch, suitable for -25 to 85°C temp range. Featuring POLYAMIDE insulator, COPPER ALLOY contacts, and 100000000 ohm insulation resistance, it's ideal for PCB applications requiring 1A signal current.
54104-4031
Molex 54104-4031 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and gold termination finish. Ideal for board mounting applications with a temperature range of -20 to 85°C. Features include polyamide insulator, 250VAC voltage rating, and UL94V-0 flammability code.
3606
Aw Industries
CARD EDGE CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Mounting Type: BOARD; Manufacturer Series: 3606;
HLW12S-2C7LF
HLW12S-2C7LF by Amphenol is a 12-contact FFC/FPC connector with 0.039" mating pitch and tin finish. It is UL 94V-0 rated, suitable for board mounting with solder termination. Ideal for applications requiring straight female connectors in headers & edge type setups.
66506-313LF
AMPHENOL ICC
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
GHR-06V-S
GHR-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting with CRIMP termination. Ideal for applications requiring reliable and secure connections in electronic devices.
DF40C-60DP-0.4V(51)
DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.
51103-0400
The Molex 51103-0400 is a board connector with 4 contacts, 0.098" pitch, and POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 105 °C, has a dielectric voltage of 1400VAC, and is UL94V-0 rated. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
22-28-4033
Molex 22-28-4033 is a board connector with 0.1" pitch, suitable for commercial applications. It features 3 male contacts with matte tin finish, rated at 4A signal current. With a durability of 25 cycles and UL94V-0 flammability rating, it offers reliable performance in temperatures ranging from 0 to 75°C.
912283001
Molex 912283001 is a PCB connector with 0.1" pitch, 0.984" body length, and bright tin finish. It has 2 rows, operates b/w -40 to 85°C, and offers durability of 5000 cycles. Ideal for board mounting applications in commercial settings due to its male contact gender and right-angle mounting style.
22-29-2051
The Molex 22-29-2051 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.5 inch. It has an insulation resistance of 1000000000 ohm and is commonly used in commercial applications due to its durability and reliability.
DF19G-20S-1C(06)
DF19G-20S-1C(06) by Hirose Electric is a FFC/FPC connector with 0.039" pitch, 500M ohm insulation resistance, and 300VAC dielectric voltage. Ideal for applications requiring a durable, female socket connector with 20 contacts, UL-rated at 94V-0 flammability for temperatures ranging from -35 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
14-56-4045
The Molex 14-56-4045 is a board connector with 0.1" mating contact pitch, gold termination finish, and 600VAC dielectric voltage. Ideal for commercial applications, it has a black insulator color, UL flammability rating of 94V-0, and operates b/w -40 to 120°C.
145638009211859+
Kyocera
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED;
KYOCERA AVX
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
14-56-2042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .139 inch; Body or Shell Style: PLUG;
145638009511859+
PCB CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: 5638; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO;
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Connectors: ONE; No. of PCB Rows: 1;
Kyocera Connector Products
PCMCIA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Terminal Pitch (mm): 2.4892;
14-56-4040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; JESD-609 Code: e4;
14-56-4041
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Plating Thickness (inch): 30u; Maximum Insertion Force (N): 2.224;
14-56-4046
The Molex 14-56-4046 is a 2-row loaded board connector with 4 contacts. It is designed for cable mounting and uses IDC termination. This female contact connector is commonly used in various applications requiring reliable connections.
14-56-4048
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: IDC; Filter Feature: NO; No. of Rows Loaded: 2;
14-56-4043
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; Mating Contact Finish: NOT SPECIFIED;
14-56-2022
The Molex 14-56-2022 is a board connector with a mating contact pitch of 0.1". It features TIN over nickel termination, phosphor bronze contacts, and glass-filled polyester insulator material. This female connector has a total of 2 contacts, suitable for commercial applications requiring a reliable rectangular contact pattern.
14-56-2062
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mounting Option-1: LATCH;
14-56-2041
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; DIN Conformance: NO; Minimum Withdrawal Force (N): 1.668;
14-56-2082
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Contact Design: PREASSEM CONN;
14-56-4042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; Contact Style: SQ PIN-SKT;
145604140014829+
145604140014829+ by KYOCERA AVX is a BOARD STACKING CONNECTOR with a Mating Contact Pitch of 0.02 inch and a Dielectric Withstanding Voltage of 350VAC. It is suitable for applications requiring a compact and reliable connection in electronic devices.
145689040000858+
BOARD STACKING CONNECTOR;
14-56-2045
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: STACKED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved