Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 22-05-7038 is a board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 1500VAC voltage withstand, and 105°C max operating temp. Ideal for PCB mounting with 3 contacts in a white insulator body.
Median Price
$0.542
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.250
100+ parts
$0.182
1k+ parts
$0.154
10k+ parts
$0.132
Interstate Connecting
$0.311
-
$0.272
$0.253
Distrelec
$0.447
$0.163
$0.153
Heilind Electronics
$0.538
$0.439
$0.426
Adafruit Industries
$0.547
Farnell
$0.899
$0.434
Arrow
$0.954
$0.646
$0.512
$0.416
DigiKey
$1.110
$0.769
$0.615
$0.511
Element14
$1.168
$1.138
$1.116
$1.071
Powell Electronics
$0.112
TTI Europe
$0.241
$0.187
PEI Genesis
Verical
Master Electronics
$0.116
Chip1Stop
$0.597
$0.546
TTI
$0.580
$0.509
$0.490
RS (Exports)
$0.744
$0.716
$0.573
Sager
TME
$0.410
$0.239
$0.158
Digiode
$0.425
Nova Conductors
$0.569
TestEquity
$0.630
Component Electronics Inc.
$0.770
$0.500
IBS Electronics
$0.575
$0.563
Vyrian
NAC Semi
$0.194
Rutronik
$0.134
Martec Srl
LIBRA Elektronik GmbH
Rapid Electronics
$0.735
Pegasus Components GmbH
VNN
Atlantic Semiconductor
Sea View Technologies
Bristol Electronics
Halfin
Lantek
Holdelec - ElecDif-Pro
Extreme Components
ComSIT Distribution GmbH
MISTER SPROCKETS
Prism Electronics
Semicontronic
$0.145
$0.141
Corphita
$0.402
Argo Parts USA
$0.518
$0.502
Advanced Electronics
Modulus Dynamics
Bastille Electronics
$0.541
$0.514
$0.506
Continental Prestige Electronics
$0.967
$0.582
$0.466
Aztec Data Supply Inc.
$7.907
Assy Fe
Eastek
Robosynatics
$0.552
$0.540
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Perfect Parts
GreenTree Electronics
Montclair Electronics, Inc.
Close contact spacing allows for high density connections, making it suitable for compact designs and saving board space.
Compact body length makes it suitable for applications where space is limited.
High insulation resistance ensures reliable and safe operation, preventing electrical leakage.
High dielectric strength allows the connector to withstand high voltages, ensuring safety in operation.
Matte tin finish with nickel barrier provides good conductivity and corrosion resistance for reliable connections.
High maximum operating temperature allows for use in a wide range of operating conditions.
High rated current capacity makes it suitable for carrying signal currents without overheating or performance degradation.
Receptacle style allows for easy mating and unmating of connectors, promoting ease of use.
Headers & Edge Type Connectors 22-05-7038 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
22-05-7038 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Mini-FIt,KK Plating 01/Nov/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Changzhou Starsea Electronics
2-640456-6
TE Connectivity
TE Connectivity 2-640456-6 is a board connector with 26 contacts, 0.1" pitch, and TIN finish. It has a temperature range of -55 to 105°C and UL94V-0 flammability rating. Ideal for commercial applications requiring a reliable male plug with solder termination on a straight mounting style board connector.
DTM06-6S
DTM06-6S by TE Connectivity is a 2-row loaded board connector with a body length of 1.185", width of 0.6", and depth of 0.817". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used in applications requiring a polarized housing, such as cable mounting with strain relief.
2-1761603-5
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; UL Flammability Code: 94V-0; No. of Rows Loaded: 2;
640456-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Manufacturer Series: 640456; Mixed Contacts: NO;
2-1761603-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Type: BOARD; Termination Contact Finish: TIN;
S3B-PH-SM4-TB(LF)(SN)
J S T Mfg
S3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with surface mount termination and right angle mounting style.
47309-2651
Molex
Molex 47309-2651 is a PCB connector with 0.043" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a durability of 10000 cycles and operates b/w -40 to 85 °C.
356-022-520-102
Edac
Edac 356-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. Ideal for board mounting applications in electronics, offering high reliability with UL certification and operating temperatures from -40 to 105°C.
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
TSM-104-01-T-SH
Samtec
Samtec's TSM-104-01-T-SH header connector features a 0.1" contact pitch, matte tin finish, and liquid crystal polymer insulator. Ideal for board mounting with a temperature range of -55 to 105°C, it has a right-angle male contact style suitable for commercial applications.
DF3-4S-2C
Hirose Electric
DF3-4S-2C by Hirose Electric is a 4-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It is used in cable mounting applications for signal currents up to 3A, featuring UL94V-0 flammability rating and POLYAMIDE insulator material.
DF19G-20P-1H(54)
DF19G-20P-1H(54) by Hirose Electric is a 20-contact board connector with 0.039" mating pitch, 0.943" body length, and 500M ohm insulation resistance. Ideal for surface mount termination in applications requiring a durable, right-angle mounting style with male contact gender and phosphor bronze material.
SM04B-SRSS-TB(LF)(SN)(P)
SM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a 2-row BOARD CONNECTOR with 0.039" pitch, 1A signal current, and 100M ohm insulation resistance. Ideal for board mounting applications requiring a male contact gender, POLYAMIDE insulator material, and operating temperatures from -25 to 85°C.
22-27-2021
Molex 22-27-2021 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring brass contacts with matte tin finish, it offers high durability with 25 cycles and insulation resistance of 1000000000 ohm. With a temperature range of 0-75°C, this white connector has a total of 2 contacts and is UL and CSA certified.
1-1761606-3
TE Connectivity 1-1761606-3 is a 2-row, 40-contact board connector with a mating contact pitch of 0.1". Featuring POLYBUTYLENE TEREPHTHALATE insulator material and rated for up to 1A signal current, it is ideal for commercial applications requiring reliable connections in temperatures ranging from -65°C to 105°C.
B2B-PH-K-S(LF)(SN)
B2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring high insulation resistance, POLYAMIDE66 insulator material, and TIN COPPER termination finish in a compact 0.232" x 0.177" x 0.236" body size.
FTSH-107-01-L-DV-K-A
The Samtec FTSH-107-01-L-DV-K-A is a 2-row, 14-contact board connector with Tin-Nickel finish. Operating from -55°C to 125°C, it has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics requiring male connectors with straight mounting style.
FTSH-105-01-L-DV
The Samtec FTSH-105-01-L-DV is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, surface-mountable connector with a UL94V-0 flammability rating.
HTSW-102-07-L-S
Samtec's HTSW-102-07-L-S is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and termination finish of TIN over NICKEL. Ideal for commercial applications, it has a temperature range from -55 to 125°C and UL flammability rating of 94V-0.
7-215079-8
TE Connectivity 7-215079-8 is a board connector with 0.05" pitch, suitable for headers & edge type connectors. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material, it has 100 V rated voltage and -40 to 105 °C operating temperature range. Ideal for commercial applications requiring a durable, polarized housing design with solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-05-3041
The Molex 22-05-3041 is a board connector with mating contact pitch of 0.1", body length of 0.4", and body width of 0.25". It features matte tin over nickel termination, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right angle mounting solution with rectangular contact pattern on PCBs.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
22-05-7048
Molex 22-05-7048 is a board connector with 4 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
22-05-7025
The Molex 22-05-7025 is a board connector with 0.098" mating contact pitch, suitable for headers & edge type connectors. Featuring a 1400VAC dielectric voltage, it has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for commercial applications requiring reliable signal transmission at 3A current rating.
22-05-2041
Molex 22-05-2041 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator material, BRASS contact material, and Tin (Sn) - Nickel (Ni) termination finish, it offers high durability with 25 cycles. Ideal for commercial applications requiring a reliable connection in a compact form factor.
22-05-2081
Molex 22-05-2081 is a board connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this connector has a durable design with UL flammability rating of 94V-0.
22-05-2051
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
22-05-7028
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: MATTE TIN OVER NICKEL;
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
22-05-3031
The Molex 22-05-3031 is a board connector with 3 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.3" x 0.25" x 0.442". It uses matte tin over nickel finish for termination and polyamide insulator material. Ideal for commercial applications requiring a right-angle mounting style on PCBs.
22-05-3051
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Insertion Force (N): 1.946;
22-05-7058
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-05-2031
Molex 22-05-2031 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring matte tin over nickel termination finish, it offers high durability with 25 cycles and reliable performance in commercial applications. The connector has a total of 3 contacts, solder termination type, and white polyamide insulator material.
22-05-2061
Molex 22-05-2061 is a board connector with 6 contacts, featuring matte tin over nickel finish. With a mating contact pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this right-angle receptacle has a durability of 25 cycles and termination via solder.
22-05-3061
Molex 22-05-3061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.6" x 0.25" x 0.442". It uses matte tin over nickel termination for soldering applications in commercial reliability scenarios.
22-05-2121
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Length: .124 inch;
22-05-7035
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Connectors: ONE;
22-05-1022
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
22-05-7045
Molex 22-05-7045 is a board connector with 0.098" mating contact pitch, 1400VAC dielectric voltage, and -40 to 105°C operating range. Ideal for commercial applications requiring a durable, polarized housing with 4 contacts in a right-angle mounting style.
22-05-7075
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved