Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-05-7025 is a board connector with 0.098" mating contact pitch, suitable for headers & edge type connectors. Featuring a 1400VAC dielectric voltage, it has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for commercial applications requiring reliable signal transmission at 3A current rating.
Median Price
$0.119
Lifecycle Status
Suppliers In-Stock
60
In-Stock Inventory
1k+
Avnet
1+ parts
$0.085
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.090
$0.087
Arrow
$0.097
Interstate Connecting
$0.096
Adafruit Industries
$0.121
$0.114
Farnell
$0.208
$0.112
DigiKey
$0.270
$0.158
$0.124
$0.100
Mouser Electronics
$0.280
$0.105
$0.094
Newark
$0.328
$0.223
$0.173
Misumi USA
$0.770
Master Electronics
$0.099
Powell Electronics
$0.088
TTI Europe
$0.078
NEP Electronics
Chip1Stop
Element14
$0.199
$0.151
$0.144
TTI
RS (Exports)
$0.101
$0.093
Distrelec
Digiode
$0.061
IBS Electronics
$0.079
$0.023
$0.020
$0.016
TestEquity
Nova Conductors
$0.126
Maritex
$0.131
$0.033
DF Sales Co.
$0.160
TME
$0.200
$0.135
$0.091
Component Electronics Inc.
$0.580
$0.500
Jameco Electronics
NAC Semi
$0.136
Rutronik
$0.103
$0.098
Vyrian
Diverse Electronics
Dan-Mar Components
LIBRA Elektronik GmbH
Lantek
Classic Components Corporation
Corel Iberica Componentes, S.L.
Holdelec - ElecDif-Pro
VNN
Sensible Micro Corp
Semi Source
Goldney Electronics S.L.
Resion
Martec Srl
Component Sense
A&K Electronics
Rotakorn
PC Components Company LLC
Bristol Electronics
Atlantic Semiconductor
R&J Components
Prism Electronics
Elcom Components
ComSIT Distribution GmbH
Amalfi Trading
Vicor Industries, Inc.
Bisco
J2 Sourcing AB
A2Z Electronics, Inc.
Semicontronic
$0.052
$0.051
$0.050
Corphita
$0.058
Advanced Electronics
Argo Parts USA
$0.122
$0.118
Aztec Data Supply Inc.
$10.485
Andel Nordic
$18.940
$13.258
Infinite Electronics LLP (Excess)
EMSNET (Excess)
Abacus Technologies
Cyclops Electronics Ltd (Excess)
Kepictronics
Continental Prestige Electronics
$0.195
Perfect Parts
Eastek
GreenTree Electronics
Futuretech Components
Robosynatics
$0.115
Lucentia Tech
Assy Fe
RTC Component Inc.
The close spacing of contacts allows for high-density connections, making this product ideal for applications where space is limited.
High insulation resistance ensures reliable and stable signal transmission, reducing the risk of electrical interference or shorts.
The high voltage withstand capacity makes this product suitable for applications requiring a high level of electrical insulation and safety.
The high maximum operating temperature allows for reliable performance even in demanding environmental conditions.
The high current rating makes this product suitable for applications requiring the transmission of moderate to high electrical currents.
Low contact resistance ensures efficient power transmission and minimal signal loss, contributing to overall system performance.
Headers & Edge Type Connectors 22-05-7025 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-05-7025 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Supplier 07/Nov/2022
PCN Packaging - Multiple Devices Packaging Changes 30/Apr/2016
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
Transys Electronics
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
SFW8S-2STE1LF
Amphenol Communications Solutions
The Amphenol Communications Solutions SFW8S-2STE1LF is an FFC/FPC connector with 0.039" mating contact pitch and 8 contacts. It features tin termination finish, UL 94V-0 flammability code, and surface mount termination. Ideal for board mounting applications requiring a straight female contact gender configuration.
640456-4
TE Connectivity
TE Connectivity 640456-4 is a board connector with 0.1" pitch, suitable for commercial applications. It features TIN finish, 5A signal current rating, and GLASS FILLED POLYESTER insulator material. Ideal for use in electronics requiring a male contact gender and straight mounting style.
20021121-00006C4LF
Amphenol Communications Solutions' 20021121-00006C4LF is a board connector with 0.05" mating contact pitch, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for applications requiring a durable male connector with surface mount termination and black insulator color.
52271-0469
Molex
Molex 52271-0469 FFC/FPC connector with 0.039" pitch, 0.118" body width, and TIN finish is ideal for board mounting applications. Features include polyamide insulator, phosphor bronze contacts, and UL94V-0 flammability rating. Suitable for surface mount termination in commercial settings.
22-12-2061
The Molex 22-12-2061 is a board connector with mating contact pitch of 0.1", insulation resistance of 50G ohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable, right-angle mounting style for commercial reliability.
62684-401100ALF
62684-401100ALF by Amphenol: FFC/FPC connector with 40 contacts, 0.020" pitch, gold finish. Ideal for board mounting in applications requiring high reliability and signal integrity.
150201
Weidmueller & Kg
Weidmueller & Kg's 150201 is a BOARD CONNECTOR with TIN finish, 4 contacts, and FEMALE gender. It is used for CABLE mounting with SCREW termination in PLUG body style.
QSH-030-01-L-D-A
Samtec
Samtec's QSH-030-01-L-D-A is a 2-row board stacking connector with 60 contacts. It features a mating contact pitch of 0.02", insulation resistance of 5G ohm, and dielectric voltage rating of 375VAC. Ideal for applications requiring high durability and reliability in commercial settings, this connector has a temperature range from -55 to 125°C.
VHR-8N
J S T Mfg
VHR-8N by J S T Mfg is a 0.156" pitch BOARD CONNECTOR with 8 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. Ideal for cable mounting applications, it has a temperature range of -25 to 85°C and UL94V-0 flammability rating.
10152821-103Q000LF
Amphenol Communications Solutions' 10152821-103Q000LF is a card edge connector with 164 contacts, gold termination finish, and glass-filled polyamide insulator. It has a mating contact pitch of 0.039", operates b/w -55 to 105°C, and offers a rated current of 1.1A. Ideal for board mounting applications requiring durability and reliable signal transmission.
51110-1050
Molex 51110-1050 is a 2-row board connector with 0.079" contact pitch, suitable for cable mounting. Featuring glass-filled polyester insulation, it has 10 contacts with 40 mohm resistance. Operating b/w -40°C to 105°C, it is UL-certified and polarized for commercial applications.
15-31-1033
The Molex 15-31-1033 header connector features a body length of 0.661", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board connections in commercial applications, it has a female contact gender, polyamide insulator material, and operates b/w -40 to 105°C.
929665-04-31-EU
3m Electronic Products Division
929665-04-31-EU by 3M Electronic Products Division is a BOARD CONNECTOR with Gold (Au) - Nickel (Ni) finish, 62 contacts in 2 rows. It has a terminal pitch of 2.54mm and is ideal for applications requiring high-quality male connectors with solder termination on boards.
BM05B-SRSS-TBT(LF)(SN)
BM05B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 5 contacts, COPPER ALLOY material, and TIN finish. It is a STRAIGHT mounting style connector for surface mount applications in headers & edge type connectors category.
154763-E
TE Connectivity's 154763-E header connector features a mating contact pitch of 0.05", insulation resistance of 10^10 ohm, and dielectric voltage rating of 707VAC. Ideal for board mounting applications in electronics, this male connector with liquid crystal polymer insulator offers durability up to 500 cycles at temperatures ranging from -55°C to 125°C.
3415
CARD EDGE CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; MIL Conformity: NO;
640456-6
TE Connectivity 640456-6 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring TIN finish, it has 6 contacts and operates b/w -55 to 105°C. With a rectangular contact pattern, it offers a rated current of 5A and solder termination for male connectors.
B8B-PH-K-S(LF)(SN)
B8B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male contact gender, RECTANGULAR PCB pattern, and POLYAMIDE66 insulator material.
B6B-XH-AM(LF)(SN)
B6B-XH-AM(LF)(SN) by J S T Mfg is a 6-contact male board connector with brass contacts and tin termination finish. It has a terminal pitch of 2.5mm, suitable for straight mounting on boards. Ideal for applications requiring reliable connections in headers & edge type connectors.
22-05-7048
Molex 22-05-7048 is a board connector with 4 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-05-3041
The Molex 22-05-3041 is a board connector with mating contact pitch of 0.1", body length of 0.4", and body width of 0.25". It features matte tin over nickel termination, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right angle mounting solution with rectangular contact pattern on PCBs.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
22-05-2041
Molex 22-05-2041 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator material, BRASS contact material, and Tin (Sn) - Nickel (Ni) termination finish, it offers high durability with 25 cycles. Ideal for commercial applications requiring a reliable connection in a compact form factor.
22-05-2081
Molex 22-05-2081 is a board connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this connector has a durable design with UL flammability rating of 94V-0.
22-05-2051
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
22-05-7028
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: MATTE TIN OVER NICKEL;
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
22-05-3031
The Molex 22-05-3031 is a board connector with 3 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.3" x 0.25" x 0.442". It uses matte tin over nickel finish for termination and polyamide insulator material. Ideal for commercial applications requiring a right-angle mounting style on PCBs.
22-05-3051
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Insertion Force (N): 1.946;
22-05-7058
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-05-2031
Molex 22-05-2031 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring matte tin over nickel termination finish, it offers high durability with 25 cycles and reliable performance in commercial applications. The connector has a total of 3 contacts, solder termination type, and white polyamide insulator material.
22-05-2061
Molex 22-05-2061 is a board connector with 6 contacts, featuring matte tin over nickel finish. With a mating contact pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this right-angle receptacle has a durability of 25 cycles and termination via solder.
22-05-7038
Molex 22-05-7038 is a board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 1500VAC voltage withstand, and 105°C max operating temp. Ideal for PCB mounting with 3 contacts in a white insulator body.
22-05-3061
Molex 22-05-3061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.6" x 0.25" x 0.442". It uses matte tin over nickel termination for soldering applications in commercial reliability scenarios.
22-05-2121
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Length: .124 inch;
22-05-7035
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Connectors: ONE;
22-05-1022
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
22-05-7045
Molex 22-05-7045 is a board connector with 0.098" mating contact pitch, 1400VAC dielectric voltage, and -40 to 105°C operating range. Ideal for commercial applications requiring a durable, polarized housing with 4 contacts in a right-angle mounting style.
22-05-7095
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved